General Purpose Relays
PCB Relays
Potter & Brumfield
Power PCB Relay RT1
n
1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
n
Sensitive coil 400mW
n
5kV/10mm coil-contact, reinforced insulation
n
Ambient temperature 85C
Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules
VZb
Approvals Contact Data (continued)
VDE REG.-Nr. 6106, UL E214025, cCSAus 14385
Technical data of approved types on request Contact ratings
Type Load Cycles
3
Contact Data 12A 16A RT3, RTD 1 HP @ 480VAC* motor 6x10
3
Contact arrangement 1 form C (CO) or 1 form A (NO) RT3, RTD 1 HP @ 240VAC* motor 6x10
3
Rated voltage 250VAC RT3, RTD 1/2 HP @ 120VAC* motor 6x10
3
Max. switching voltage 400VAC RT3, RTD 60 LRA/10 FLA @ 250VAC* motor 30x10
3
Rated current 12A 16A RT3, RTD TV-5 @ 120VAC* Tungsten 25x10
3
Limiting continuous current 12A 16A, UL: 20A RT3, RTD A300, 720VA @ 240VAC* Pilot Duty 30x10
3
Limiting making current RT3, RTD B300, 360VA @ 240VAC** Pilot Duty 30x10
*) form A (NO) contact only, **) form B (NC) contact only
max. 4s, duty factor 10% 25A 30A
Breaking capacity max. 3000VA 4000VA
6
Contact Material AgNi 90/10 Mechanical endurance >30x10 operations
-1
Frequency of operation, with/without load 360/72000h
Operate/release time max., DC coil 8/6ms
Bounce time max., DC coil, form A/form B 4/6ms Coil Data
Coil voltage range 5 to 110VDC
Contact ratings Operative range, IEC 61810 2
Type Contact Load Cycles Coil insulation system according UL class F
IEC 61810
3
RT314 DC-coil A (NO) 16A, 250VAC, cos=1, 85C 30x10 Coil versions, DC coil
3
RT314 DC-coil C (CO) 16A, 250VAC, cos=1, 85C 10x10 Coil Rated Operate Release Coil Rated coil
3
RT314 DC-coil A (NO) 10A, 400VAC, cos=1, 85C 150x10 code voltage voltage voltage resistance power
3
RT114 DC-coil A (NO) 12A, 250VAC, cos=1, 85C 50x10 VDC VDC VDC 10% mW
3
RT114 AC-coil A (NO) 12A, 250VAC, cos=1, 70C 100x10 005 5 3.5 0.5 62 403
UL 508 006 6 4.2 0.6 90 400
3
RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85C 6x10 009 9 6.3 0.9 200 400
3
RT334 A (NO) 16A, 250VAC, gen. purpose, 85C 50x10 012 12 8.4 1.2 360 400
3
RT314 A (NO) 1hp, 240VAC, 40C 1x10 024 24 16.8 2.4 1440 400
EN60947-5-1 048 48 33.6 4.8 5520 417
All figures are given for coil without pre-energization, at ambient temperature +23C.
RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050
Other coil voltages on request.
EN60730-1
3
RT314 DC-coil A (NO) 12(2)A, 250VAC, 85C 100x10
1
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company General Purpose Relays
PCB Relays
Potter & Brumfield
Power PCB Relay RT1 (Continued)
Insulation Data Other Data (contiinued)
Initial dielectric strength Terminal type PCB-THT, plug-in
between open contacts 1000V Weight 14g
rms
between contact and coil 5000V Resistance to soldering heat THT, IEC 60068-2-20
rms
Clearance/creepage RTII 270C/10s
between contact and coil 10/10mm RTIII 260C/5s
Material group of insulation parts IIIa Packaging/unit tube/20 pcs., box/500 pcs.
Tracking index of relay base PTI 250V
Accessories
Other Data For details see datasheet Accessories Industrial Power Relay RT
NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
(according IEC 61810-1); for relays mounted on sockets deratings may apply.
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to 85C
Category of environmental protection
IEC 61810 RTII - flux proof, RTIII - wash tight
Vibration resistance (functional)
form A/form B contact, 30 to 500Hz 20g/5g
Shock resistance (destructive) 100g
Dimensions
S0272-BB
PCB layout / terminal assignment
*) With the recommended PCB hole sizes a grid
Bottom view on solder pins pattern from 2.5 mm to 2.54 mm can be used.
12 A, pinning 3.5 mm 12 A, pinning 5 mm 16A, pinning 5 mm
S0418-CB S0418-CN S0418-CA
1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact
S0163-BG S0163-BC S0163-BE
1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact
S0163-BH S0163-BD S0163-BF
2
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company