RF Signal Relays AXICOM HF3 S Relay n Y-Design n Frequency range DC to 3GHz n Impedance 50 / 75 n Small dimensions (15x7.6x10.6mm) Telecom-, Signal and RF Relays Sep. 07 n 1 form C contact (1 changeover contact) n Immersion cleanable HF3 S Relay n Low power consumption (140mW) Terminal assignment Typical applications Relay top view Cable modems and linecards/ CATV, Tabs, measurement and test equipment ATE, satellite / audio / video tuners, wireless base stations and Non-latching type, Latching type, 1 coil Latching type, 2 coils antennas, power stages not energized condition rest condition reset condition Telecom-, Signal and RF Relays Sep. 07 Contact Data Coil Data (continued) Telecom-, Signal and RF Relays Sep. 07 Contact arrangement 1 form C, 1 CO HF3 S Relay Max. switching voltage 220VDC, 250VAC Coil versions, bistable HF3 S Relay Rated current 2A Coil Rated Set Limiting Reset Coil Rated coil Limiting continuous current, 23C 2A code voltage voltage voltage voltage resistance power Terminal assignment Switching power 60W, 62.5VA, VDC VDC VDC VDC 10% mW Terminal assignment 50W (2.5GHz) 50 version, bistable, 1 coil Relay top view Max. Continuos RF-Power, 73S 5 3.75 15.30 -3.75 357 70 Relay top view 1) at 20C., VSWR <1.2 100W 3GHz 50 version, bistable, 2 coils 1) 150W 2GHz 91S 3 2.25 6.50 2.25 64 140 Non-latching type, Latching type, 1 coil Latching type, 2 coils 1) Breaking capacity max. 300W 92S 4.5 3.38 9.80 3.38 145 140 Non-latching type, Latching type, 1 coil Latching type, 2 coils not energized condition rest condition reset condition Contact material Ag, Au covered 93S 5 3.75 10.90 3.75 178 140 not energized condition rest condition reset condition Minimum switching voltage 100V 96S 12 9.00 26.10 9.00 1028 140 Initial contact resistance <100m at 10mA/20mV 75 version, bistable, 2 coils Operate time typ. 3ms, max. 5ms 41S 3 2.25 6.50 2.25 64 140 Release time 42S 4.5 3.38 9.80 3.38 145 140 without diode in parallel typ. 2ms, max. 5ms 43S 5 3.75 10.90 3.75 178 140 with diode in parallel typ. 4ms, max. 6ms 46S 12 9.00 26.10 9.00 1028 140 Bounce time max. typ. 1ms, max. 3ms All figures are given for coil without prCoil Operating Rangee-energization, at ambient temperature +23C. Duration of set/reset pulse min. 20ms 7 Mechanical endurance 10 operations 140 mW 70 mW 1) with appropriat cooling only Coil operating Range 3.5 140 mW Coil Data 70 mW Coil voltage range 3 to 24VDC 3 Umax. at 0 A Umax. at 0 A Coil versions, monostable 2.5 Coil Rated Operate Limiting Release Coil Rated coil 2 code voltage voltage voltage voltage resistance power VDC VDC VDC VDC 10% mW 1.5 50 version, monostable, 1 coil U nom. nominal coil voltage U nom. nominal coil voltage 51 3 2.25 6.50 0.30 64 140 1 52 4.5 3.38 9.80 0.45 145 140 Uop. min. Coil Operating Range 0.5 53 5 3.75 10.90 0.50 178 140 Uop. min. Coil Operating Range Urel. min. 56 12 9.00 26.10 1.20 1028 140 0 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 57 24 18.00 52.30 2.40 4114 140 140 mW 70 mW 140 mW 70 mW Ambient Temperature C 75 version, monostable, 1 coil Ambient Temperature C 01 3 2.25 6.50 0.30 64 140 3.5 140 mW 02 4.5 3.38 9.80 0.45 145 140 3.5 140 mW 70 mW U = Nominal coil voltage 70 mW 03 5 3.75 10.90 0.50 178 140 nom 3 Umax. at 0 A 3 U = Upper limit of the operative range of 05 9 6.75 19.60 0.90 574Umax. at 0 A 140 max. Umax. at 0 A 06 12 9.00 26.10 1.20 1028 140 2.5 the coil voltage (limiting voltage)Umax. at 0 A 2.5 All figures are given for coil without pre-energization, at ambient temperature +23C. U = Lower limit of the operative range of op. min. 2 2 the coil voltage (reliable operate voltage) For latching relays U resp U min. set min reset 1.5 1.5 U nom. nominal coil voltage U = Lower limit of the operative range of rel. min. U nom. nominal coil voltage 1U nom. nominal coil voltage the coil voltage (reliable release voltage) 1U nom. nominal coil voltage Uop. min. Uop. min. 0.5 0.5 Uop. min. Urel. min. Uop. min. Urel. min. 0 0 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 Ambient Temperature C Ambient Temperature C Ambient Temperature C Ambient Temperature C All specications subject to change. Consult Tyco Electronics for latest specications.1 5 of 12 06-2013, Rev. 0613 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- U = Nominal coil voltage nom U = Nominal coil voltage nom www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications U = Upper limit of the operative range of max. U = Upper limit of the operative range of 2013 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. max. the coil voltage (limiting voltage) a TE Connectivity Ltd. company AXICOMAXICOM RF Signal Relays AXICOM Telecom-, Signal and RF RelaysTelecom-, Signal and RF Relays 108-98021 Rev. 108-98021 Rev. D D AXICOMAXICOM HF3 S Relay (Continued) HF3 S RelaHF3 S Relay y Telecom-, Signal and RF RelaysTelecom-, Signal and RF Relays 108-98021 Rev. 108-98021 Rev. D D AXICOMAXICOM HF3 S RelaHF3 S Relay y Insulation Data 50 version 75 version Other Data High FrHigh Frequency Dataequency Data Initial dielectric strength Telecom-, Signal and RF Relays Telecom-, Signal and RF Relays Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content108-98021 Rev. 108-98021 Rev. D D between open contacts 600V refer to the Product Compliance Support Center at rms between contact and coil 1000V www.te.com/customersupport/rohssupportcenter rms HF3 S RelaHF3 S Relay y RF characteristics Initial surge withstand voltageRF characteristics 50 Ambient temperatur50 e 75 75 -55C to +85C High FrHigh Frequency Dataequency Data between open contacts 1000V Thermal resistance <165K/W Isolation at 100 MHz / 900 MHz / 3 GHzIsolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB-95dB / -80dB / -55dB -96dB / -80dB / -50dB-96dB / -80dB / -50dB between contact and coil 1500V Category of environmental protection Insertion loss at 100 MHz / 900 MHz / 3 GHzInsertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB-0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB IEC 61810 RT III - wash tight RF characteristics RF characteristics 50 50 75 75 High Fr V High Fr V .S.Wequency Data.S.W.R. at 100 MHz / 900 MHz / 3 GHzequency Data.R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.25Degr1.05 / 1.10 / 1.25ee of protection, IEC 60529 1.05 / 1.20 / 1.30 IP 67, immersion cleanable1.05 / 1.20 / 1.30 RF Data Vibration resistance (functional) 35g, 10 to 1000Hz Isolation at 100 MHz / 900 MHz / 3 GHzIsolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB-95dB / -80dB / -55dB -96dB / -80dB / -50dB-96dB / -80dB / -50dB Isolation Shock resistance (functional), half sinus 11ms 50g Insertion loss at 100 MHz / 900 MHz / 3 GHzInsertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB-0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB at 100MHz/900MHz 95dB/80dB 96dB/80dB Shock resistance (destructive), half sinus 0.5ms 150g RF characteristics RF characteristics 50 50 75 75 V V .S.W.S.W.R. at 100 MHz / 900 MHz / 3 GHz.R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.251.05 / 1.10 / 1.25 1.05 / 1.20 / 1.301.05 / 1.20 / 1.30 at 3GHz 55dB 50dB Terminal type SMT 50 50 Isolation at 100 MHz / 900 MHz / 3 GHzIsolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB75-95dB / -80dB / -55dB 75 -96dB / -80dB / -50dB-96dB / -80dB / -50dB Insertion loss Weight max. 3g at 100MHz/900MHz 0.03dB/0.12dB 0.03dB/0.12dB Resistance to soldering heat SMT Insertion loss at 100 MHz / 900 MHz / 3 GHzInsertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB-0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB at 3GHz 0.30dB 0.30dB IEC 60068-2-58 265C/10s V V .S.W.S.W.R. at 100 MHz / 900 MHz / 3 GHz.R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.251.05 / 1.10 / 1.25 1.05 / 1.20 / 1.301.05 / 1.20 / 1.30 Voltage standing wave ratio (VSWR) Moisture sensitive level, JEDEC J-Std-020D MSL3 50 50 75 75 0 0 at 100MHz/900MHz/3GHz 1.05/1.10/1.25 1.05/1.20/1.30 Ultrasonic cleaning not recommended 0 0 NO NO Packaging/unit, SMT reel/250 pcs., box/250 pcs. NO NO NC NC NC NC -20 -20 -20 -20 50 50 75 75 0 0 0 0 -40 -40 -40 -40 NO NO NO NO RF performance, 50 version RF performance, 75 version NC NC NC NC -20 -20 -20 -20 -60 -60 -60 -60 0 0 0 0 -40 -40 -40 -40 -80 -80 -80 -80 NO NO NO NO NC NC NC NC -20 -20 -20 -20 -60 -60 -100 -100 -60 -60 -100 -100 -40 -40 -40 -40 -80 -80 -120 -120 -80 -80 -120 -120 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency MHzFrequency MHz -60 -60 -60 -60 Frequency MHz Frequency MHz -100 -100 -100 -100 -80 -80 -120 -120 -80 -80 -120 -120 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency MHzFrequency MHz -100 -100 Frequency MHz Frequency MHz -100 -100 -120 -120 0.00 0.00 0.00 0.00 -120 -120 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 NO NO 050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 NO NO NC NC Frequency MHzFrequency MHz NC NC Frequency MHz Frequency MHz -0.10 -0.10 -0.10 -0.10 0.00 0.00 0.00 0.00 NO NO NO NO NC NC NC NC -0.20 -0.20 -0.20 -0.20 -0.10 -0.10 -0.10 -0.10 0.00 0.00 0.00 0.00 NO NO NO NO NC NC -0.30 -0.30 NC NC -0.30 -0.30 -0.20 -0.20 -0.20 -0.20 -0.10 -0.10 -0.10 -0.10 -0.40 -0.40 -0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 -0.30 -0.30 050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 -0.30 -0.30 -0.20 -0.20 Frequency MHzFrequency MHz -0.20 -0.20 Frequency MHz Frequency MHz -0.40 -0.40 -0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 -0.30 -0.30 -0.30 -0.30 050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency MHzFrequency MHz Frequency MHz Frequency MHz -0.40 -0.40 1.40 1.40 1.40 1.40 -0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 NO NO 050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 NO NO NC NC Frequency MHzFrequency MHz NO NO NC NC Frequency MHz Frequency MHz NC NC 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.40 NO NO NO NO NC NC NO NO NC NC NC NC 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.40 NO NO NO NO NC NC NO NO 1.10 1.10 NC NC 1.10 1.10 NC NC 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.00 1.00 1.00 1.00 050500 00 1000 1000 1500 1500 2000 2000 2500 2500 1.10 1.10 1.10 0 1.10 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency MHzFrequency MHz 1.20 1.20 1.20 1.20 Frequency MHzFrequency MHz 1.00 1.00 2 1.00 1.00 1.10 051.10 0500 00 1000 1000 1500 1500 2000 2000 2500 2500 1.1006-2013,1.10 Rev. 0613 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency MHzFrequency MHz Frequency MHzFrequency MHz www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2013 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. 1.00 1.00 a TE Connectivity Ltd. company