214A042-25-0 D-Sub Connector Boots, Straight Boot Angle, Adhesive Purchased Separately, 0 Position, 0mm 0in Centerline, 0A Contact Current Rating (Max) 214A042-25-0 ACTIVE Raychem TE Internal : 806793-000 D-Sub Connector Boots, Straight Boot Angle, Adhesive Purchased Separately, 0 Position, 0mm 0in Centerline, 0A Contact Current Rating (Max) View on TE.com> Connectors > D-Shaped Connectors > D-Sub Accessories > D-Sub Connector Boots Boot Angle: Straight Adhesive Pre-Coating: Without Adhesive Description: Adhesive Purchased Separately Number of Positions: 0 Centerline (Pitch): 0 mm 0 in Features Product Type Features Product Type Molded Boot Molded Part Type D Subminiature Boot Adhesive Description Adhesive Purchased Separately Configuration Features Number of Positions 0 Body Features Material Systems Code 25 Material Fluid Resistant Modified Elastomer Material Code 25 Boot Angle Straight Adhesive Pre-Coating Without Contact Features Contact Current Rating (Max) 0 A Housing Features Centerline (Pitch) 0 mm 0 in Dimensions Connector Width 10.7 mm .421 in Usage Conditions 10/10/2021 11:26PM Page1 For support call+1 800 522 6752 214A042-25-0 D-Sub Connector Boots, Straight Boot Angle, Adhesive Purchased Separately, 0 Position, 0mm 0in Centerline, 0A Contact Current Rating (Max) Usage Conditions Operating Temperature Range -75 150 C -103 302 F Other Adhesive Code S1125 Comment Contact Raychem for additional adhesive and/or cut off boot length information Adhesive Options S1048 Separate Adhesive, S1125 Separate Adhesive Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUL 2021 (219) Candidate List Declared Against: JUL 2021 (219) Does not contain REACH SVHC Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on requirements for substances in articles posted at this URL: