214A332-25-0
D-Sub Connector Boots, Straight Boot Angle, Adhesive Purchased Separately, 0
Position, 0mm [0in] Centerline, 0A Contact Current Rating (Max)
214A332-25-0 ACTIVE
Raychem
TE Internal #: 806795-000
D-Sub Connector Boots, Straight Boot Angle, Adhesive Purchased
Separately, 0 Position, 0mm [0in] Centerline, 0A Contact Current
Rating (Max)
View on TE.com>
Connectors > D-Shaped Connectors > D-Sub Accessories > D-Sub Connector Boots
Boot Angle: Straight
Adhesive Pre-Coating: Without
Adhesive Description: Adhesive Purchased Separately
Number of Positions: 0
Centerline (Pitch): 0 mm [ 0 in ]
Features
Product Type Features
Product Type Molded Boot
Molded Part Type D Subminiature Boot
Adhesive Description Adhesive Purchased Separately
Configuration Features
Number of Positions 0
Body Features
Material Systems Code 25
Material Fluid Resistant Modified Elastomer
Material Code 25
Boot Angle Straight
Adhesive Pre-Coating Without
Contact Features
Contact Current Rating (Max) 0 A
Housing Features
Centerline (Pitch) 0 mm[0 in]
Dimensions
Connector Width 10.7 mm[.421 in]
Usage Conditions
01/31/2021 06:03PM | Page1
For support call+1 800 522 6752
214A332-25-0
D-Sub Connector Boots, Straight Boot Angle, Adhesive Purchased Separately, 0
Position, 0mm [0in] Centerline, 0A Contact Current Rating (Max)
Usage Conditions
Operating Temperature Range -75 150 C[-103 302 F]
Other
Adhesive Code S1125
Comment Contact Raychem for additional adhesive
and/or cut off boot length information
Adhesive Options S1048 Separate Adhesive, S1125 Separate
Adhesive
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU Compliant
EU ELV Directive 2000/53/EC Compliant
China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUN 2020
(209)
Candidate List Declared Against: JUN 2020
(209)
Does not contain REACH SVHC
Halogen Content Not Low Halogen - contains Br or Cl > 900
ppm.
Solder Process Capability Not applicable for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides
on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on
requirements for substances in articles posted at this URL: