2-1611023-5 TE Connectivity

Catalog 1308242 Issued 3-03 (PDF Rev. 1-06) PRODUCTS UNLIMITED Model 96 - 3186 series Definite Purpose Contactor 3-pole, 75-90 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40C +65C. 3-pole contactors. Convenient universal mounting plate. Flammability: UL 94-HB housing. Optional interlock/auxiliary switches available. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250 (6.35 mm) quick connects. Contact Data 25C Wire Size: 14-1/0 Cu/Al AWG Tightening Torque: 50 in.-lbs. Arrangements: 3 Form X (3PST-NO-DM). Coil Termination: 0.250 quick connect and a 6-32 screw. Maximum Ratings: See Contact Ratings Table. Arc Cover: Standard. Material: Silver Cadmium Oxide. Weight: 64 oz. (1820 g) approximately Coil Data 25C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Tungsten/ Maximum Horsepower Load of Voltage Rotor Amps Ballast Voltage Single Three Amps Poles Amps Amps Phase Phase 110/120 5 - 75 3 240 450 93 200/208 10 20 480 375 93 63 240/277 15 25 600 300 93 480 - 40 600 - 25 110/120 7.5 - 90 3 240 540 120 200/208 15 25 480 450 120 63 240/277 20 30 600 360 120 480 - 50 600 - 50 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 18 88 177 220 384 Drop-Out Volts Range 6 -15 20 - 70 40 - 110 65-185 150 - 270 Nominal Inrush VA 50 Hz 285 285 285 285 285 Nominal Inrush VA 60 Hz 240 240 240 240 240 Nominal Sealed VA 50 Hz 42 42 42 42 42 Nominal Sealed VA 60 Hz 27 27 27 27 27 Nominal DC Resistance - Ohms .63 15.6 63.5 84 255 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 838 specified. Refer to inside back cover.Catalog 1308242 Issued 3-03 (PDF Rev. 1-06) PRODUCTS UNLIMITED Ordering Information Typical Part No. BB 3186 - 30 I 90 999 1. Series: 3186 = 3-pole, 75-90 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded J = 120VAC, molded M = 277VAC, molded 5.Contact Ratings (Inductive): 75 = 75 FLA 90 = 90 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. StandarStandard pard part numbers listt numbers listed beloed below arw are more more like likely tely too be a be avvailable frailable from stom stocock.k. None at present. Outline Dimensions Termination 2.875 4.062 4.187 (73.02) (103.2) (106.3) 2.50 (63.5) 3.75 (95.25) .406 (10.31) Standard 3.75 (95.25) on 75-90 FLA 5.00 Lug accepts 14-1/0 (127.01) Cu/Al AWG 4.625 (117.5) .203 (5.16) 2.25 (57.15) .188 2.50 (63.5) (4.78) 2.875 (73.02) Shown with Optional Auxiliary Switch Equipped with 0.250 (6.35) Quick Connect Terminals Various interlock / auxiliary switches are available for the Model 96 contactor. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-303 1 configurations listed. 0 1 34300-331 1 Maximum of two. Must 1 1 34300-332 1 NORMALLY OPEN NORMALLY CLOSED be same polarity. 2 0 34300-303 2 -303 STYLE -331 STYLE See footnote (1) for ratings. 0 2 34300-331 2 2 2 34300-332 2 SPDT Circuit 1 1 34300-337 1 See footnote (2) for ratings. 2 2 34300-337 2 SPDT Dry Circuit, 0.1 amp max. 1 1 34300-341 1 Gold Flashed Contacts 2 2 34300-340 1 Equipped with 6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits NORMALLY OPEN & CLOSED SPDT Description Contact Config. Kit Catalog Number of -332 STYLE -337 & -341 STYLE NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC W/ 6-32 SCREW & SADDLE CLAMP 120V 240V 480V 600V 1/2A, 125 VDC 1/4A, 250 VDC: -344 STYLE Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 839 specified. Refer to inside back cover.