ASSY USED ON:
ANTI-ROTATION SCREW 7
CODE 18 - HEAT SHRINK BOOT BACKSHELL
218M632A19B
SERIES
DASH NUMBER (TABLE 1)
MANUFACTURER CODE
SEE TABLE 2
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATION,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-218M612-19B).
4. BACKSHELL MATES TO MIL-DTL-5015, CLASS A, E & R, MS3100, MS3101 &MS3106.
RESILIENT INSERT, SOLDER TYPE AND BENDIX 10-214, CANNON CA-RX
COMMERCIAL CRIMP TYPE (LESS ENDBELL).
5. ALL THREAD SIZES FOR ORDER APPLY.
6. ADDITIONAL PIECE(S) SUPPLIED WHEN CONNECTOR MFR IS UNKNOWN (D IN TABLE 2)
7. ANTI-ROTATIONAL SET SCREW, THREE #4-40 THREADED HOLES 120 APART, SINGLE
MATING SET SCREW SUPPLIED.
DATE
3RD ANGLE
DRAWN K.WINCZURA
TITLE:
PROJECTION
26/05/2015
NOT TO
CHECKED 26/05/2015 SCALE
HEAT SHRINK BOOT BACKSHELL
UNLESS OTHERWISE SPECIFIED
APPROVED
K.SHEPPARD 27/04/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 02/09/2015
ANGULAR +/- 1
REVISIONS
LTR DATE
DESCRIPTION APPROVED
MIL-DTL-5015D
H
REVISED PER ECN AD93111
J REVISED PER ECO-15-012672 02/09/2015 H.SMITH
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
218M6XX J 1
POLAMCO/TE CAGE CODE: U5792ASSY USED ON:
A-A
A
SILICONE O-RING 27,00
A
PART MARK
HERE
TABLE 1
MFR
X
ORDER SHELL A B Y
CODE Z
NUMBER SIZE THREAD MAX MAX +0,20/-0,00
TABLE 3
8S B 3/8-32 UNEF 18,5 6,2 13,0 1,12
18,0 8,0 13,0 1,12
8S C 7/16-28 UNEF
08
8S A, R 7/16-27 UNS 18,5 8,0 13,0 1,12
8S D 6 5 18,5 8,0 13,0 1,12
10 - 19,8 9,5 15,0 1,12
10S 1/2-28 UNEF
10SL C 9/16-24 UNEF 21,6 11,2 16,0 1,12
A, B, R 23,0 12,7 19,0 1,12
11 10SL 5/8-24 UNEF
10SL D 6 5 23,0 11,2 19,0 1,12
B, C 23,0 12,7 19,0 1,12
12 & 12S 5/8-24 UNEF
12
12 & 12S A, R 11/16-24 UNEF 24,9 14,3 19,0 1,12
12 & 12S D 6 5 24,9 12,7 19,0 1,12
- 27,7 16,0 21,0 1,12
14 14 & 14S 3/4-20UNEF
-
16 16 & 16S 7/8-20 UNEF 31,1 19,0 24,0 1,12
- 34,4 20,7 26,0 1,12
18 18 1-20 UNEF
20 A, B, C 1 1/8-18 UNEF 37,6 25,4 34,0 1,75
37,6 25,4 34,0 1,75
20 20 R 1 1/8-24 UNS
20 D 6 5 37,6 25,4 34,0 1,75
-
22 22 1 1/4-18 UNEF 40,6 28,5 36,0 1,75
- 43,6 31,8 40,5 1,75
24 24 1 3/8-18 UNEF
-
28 28 1 5/8-18 UNEF 48,6 35,0 43,0 2,20
B, C 54,9 41,5 48,0 2,20
32 1 7/8-16 UN
32
32 A, R 1 29/32-18 UN 54,9 41,3 48,0 2,20
54,9 41,5 48,0 2,20
32 D 6 5
36 B 2 1/16-16 UNS 64,6 47,6 54,5 2,20
64,6 47,6 54,5 2,20
36 R 2 1/16-20 UNS
36
64,6 48,0 54,5 2,20
36 C 2 1/8-16 UN
36 A 2 1/8-18 UNS 64,6 47,6 54,5 2,20
64,6 48,0 54,5 2,20
36 D 6 5
28,40 MAX
40 B 2 5/16-16 UN 70,6 54,0 60,5 2,20
40 A, C, R 70,6 54,0 60,5 2,20
40 2 3/8-16UN SILICONE O-RING
40 D 6 5 69,3 54,0 60,5 2,20
-
44 44 2 5/8-16 UN 82,0 60,3 67,6 2,20
82,0 66,7 74,0 2,20
48 C 2 13/16-18 UNS
48 48 A, R 2 7/8-16 UN 82,0 66,7 74,0 2,20
82,0 66,7 74,0 2,20
48 D 6 5
TABLE 2
MFR CONNECTOR MANUFACTURER
(MS 3100, MS 3101 & MS 3106)
CODE
A AMPHENOL - CLASS A
B BENDIX - CLASS A, E & R
CANNON - CLASS A, E & R
C
D MFR UNKNOWN, CLASS A, E & R
R AMPHENOL - CLASS R
- MFR CODE NOT REQUIRED
ADDITIONAL PIECE(S) SUPPLIED WHEN
CONNECTOR MANUFACTURER IS UNKNOWN
IN TABLE 3)
DATE
3RD ANGLE
DRAWN K.WINCZURA
TITLE:
PROJECTION
26/05/2015
NOT TO
CHECKED 26/05/2015 SCALE
HEAT SHRINK BOOT BACKSHELL
UNLESS OTHERWISE SPECIFIED
APPROVED
K.SHEPPARD 27/04/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 02/09/2015
ANGULAR +/- 1
REVISIONS
LTR DATE
DESCRIPTION APPROVED
MIL-DTL-5015D
H
REVISED PER ECN AD93111
J REVISED PER ECO-15-012672 02/09/2015 H.SMITH
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
218M6XX J 2
POLAMCO/TE CAGE CODE: U5792
B
A THREAD
XXXX
B
A THREAD
Z
X
Y