218M624-19A TE Connectivity

ASSY USED ON: ANTI-ROTATION SCREW 7 CODE 18 - HEAT SHRINK BOOT BACKSHELL 218M632A19B SERIES DASH NUMBER (TABLE 1) MANUFACTURER CODE SEE TABLE 2 MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATION, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-218M612-19B). 4. BACKSHELL MATES TO MIL-DTL-5015, CLASS A, E & R, MS3100, MS3101 &MS3106. RESILIENT INSERT, SOLDER TYPE AND BENDIX 10-214, CANNON CA-RX COMMERCIAL CRIMP TYPE (LESS ENDBELL). 5. ALL THREAD SIZES FOR ORDER APPLY. 6. ADDITIONAL PIECE(S) SUPPLIED WHEN CONNECTOR MFR IS UNKNOWN (D IN TABLE 2) 7. ANTI-ROTATIONAL SET SCREW, THREE 4-40 THREADED HOLES 120 APART, SINGLE MATING SET SCREW SUPPLIED. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 26/05/2015 NOT TO CHECKED 26/05/2015 SCALE HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 27/04/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 02/09/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-5015D H REVISED PER ECN AD93111 J REVISED PER ECO-15-012672 02/09/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 218M6XX J 1 POLAMCO/TE CAGE CODE: U5792ASSY USED ON: A-A A SILICONE O-RING 27,00 A PART MARK HERE TABLE 1 MFR X ORDER SHELL A B Y CODE Z NUMBER SIZE THREAD MAX MAX +0,20/-0,00 TABLE 3 8S B 3/8-32 UNEF 18,5 6,2 13,0 1,12 18,0 8,0 13,0 1,12 8S C 7/16-28 UNEF 08 8S A, R 7/16-27 UNS 18,5 8,0 13,0 1,12 8S D 6 5 18,5 8,0 13,0 1,12 10 - 19,8 9,5 15,0 1,12 10S 1/2-28 UNEF 10SL C 9/16-24 UNEF 21,6 11,2 16,0 1,12 A, B, R 23,0 12,7 19,0 1,12 11 10SL 5/8-24 UNEF 10SL D 6 5 23,0 11,2 19,0 1,12 B, C 23,0 12,7 19,0 1,12 12 & 12S 5/8-24 UNEF 12 12 & 12S A, R 11/16-24 UNEF 24,9 14,3 19,0 1,12 12 & 12S D 6 5 24,9 12,7 19,0 1,12 - 27,7 16,0 21,0 1,12 14 14 & 14S 3/4-20UNEF - 16 16 & 16S 7/8-20 UNEF 31,1 19,0 24,0 1,12 - 34,4 20,7 26,0 1,12 18 18 1-20 UNEF 20 A, B, C 1 1/8-18 UNEF 37,6 25,4 34,0 1,75 37,6 25,4 34,0 1,75 20 20 R 1 1/8-24 UNS 20 D 6 5 37,6 25,4 34,0 1,75 - 22 22 1 1/4-18 UNEF 40,6 28,5 36,0 1,75 - 43,6 31,8 40,5 1,75 24 24 1 3/8-18 UNEF - 28 28 1 5/8-18 UNEF 48,6 35,0 43,0 2,20 B, C 54,9 41,5 48,0 2,20 32 1 7/8-16 UN 32 32 A, R 1 29/32-18 UN 54,9 41,3 48,0 2,20 54,9 41,5 48,0 2,20 32 D 6 5 36 B 2 1/16-16 UNS 64,6 47,6 54,5 2,20 64,6 47,6 54,5 2,20 36 R 2 1/16-20 UNS 36 64,6 48,0 54,5 2,20 36 C 2 1/8-16 UN 36 A 2 1/8-18 UNS 64,6 47,6 54,5 2,20 64,6 48,0 54,5 2,20 36 D 6 5 28,40 MAX 40 B 2 5/16-16 UN 70,6 54,0 60,5 2,20 40 A, C, R 70,6 54,0 60,5 2,20 40 2 3/8-16UN SILICONE O-RING 40 D 6 5 69,3 54,0 60,5 2,20 - 44 44 2 5/8-16 UN 82,0 60,3 67,6 2,20 82,0 66,7 74,0 2,20 48 C 2 13/16-18 UNS 48 48 A, R 2 7/8-16 UN 82,0 66,7 74,0 2,20 82,0 66,7 74,0 2,20 48 D 6 5 TABLE 2 MFR CONNECTOR MANUFACTURER (MS 3100, MS 3101 & MS 3106) CODE A AMPHENOL - CLASS A B BENDIX - CLASS A, E & R CANNON - CLASS A, E & R C D MFR UNKNOWN, CLASS A, E & R R AMPHENOL - CLASS R - MFR CODE NOT REQUIRED ADDITIONAL PIECE(S) SUPPLIED WHEN CONNECTOR MANUFACTURER IS UNKNOWN IN TABLE 3) DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 26/05/2015 NOT TO CHECKED 26/05/2015 SCALE HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 27/04/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 02/09/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-5015D H REVISED PER ECN AD93111 J REVISED PER ECO-15-012672 02/09/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 218M6XX J 2 POLAMCO/TE CAGE CODE: U5792 B A THREAD XXXX B A THREAD Z X Y