2217548-1 TE Connectivity

Instruction Sheet TETRA-CRIMP Hand Crimping Tool PN 59824-1 408-2823 2 FEB 2022 Rev AA PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low-volume applications. A wide selection of powered application equipment is available for extended-use production operations. Figure 1: TETRA-CRIMP Hand Crimping Tool PN 59824-1 1 5 Back side of tool Ratchet pawl 2 6 Crimping chamber (3 places) Locator assembly 3 7 Crimping chamber label Crimping dies 4 Ratchet handle 2022 TE Connectivity Ltd. family of companies. PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change. 1 of 11 All Rights Reserved. For latest revision and Regional Customer Service, visit our website at www.te.com. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 408-2823 1. INTRODUCTION The TETRA-CRIMP Hand Crimping Tool 59824-1 (Figure 1) is designed to crimp the terminals and splices shown in Figure 2 onto stranded wire sizes 22 through 10 AWG (Table 1). For product part numbers, refer to AMP Terminals & Splices on the TE Connectivity website. NOTE Dimensions in this instruction sheet are in millimeters with inches in brackets . Figures are for reference only and are not drawn to scale. Read these instructions thoroughly before crimping connectors. Figure 2: Terminals and splices 1 8 PIDG ring tongue terminal Flat side 2 9 PLASTI-GRIP ring tongue terminal Strip length 3 10 PIDG insulation restriction ring tongue terminal Color-coded insulation 4 11 PIDG FASTON terminal Striped color code for HD 5 12 PIDG butt splice Equally-spaced shaded stripes 6 13 Wire barrel Window indent 7 Insulation barrel 2 of 11 Rev AA