SCD
55A0813
SPECIFICATION CONTROL DRAWING
Date Revision
Title WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
1-12-17 S
NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
PRIMARY INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
Primary insulation shall be of a contrasting
pigmentation to that of the jacket.
CONDUCTOR - NICKEL-COATED COPPER JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
TABLE I. CONSTRUCTION DETAILS
DIAMETER OF FINISHED WIRE
STRANDED
PART WIRE CONDUCTOR
MAXIMUM
CONDUCTOR MAXIMUM
NUMBER SIZE STRANDING
RESISTANCE DIAMETER
WEIGHT
(inch)
1/ (AWG) (number x AWG)
AT 20C (inch)
(lbs/1000 ft.)
MINIMUM MAXIMUM (ohms/1000 ft.)
55A0813-26-* 26 19 x 38 .018 .020 42.2 .040 .002 1.70
55A0813-24-* 24 19 x 36 .023 .024 25.9 .045 .002 2.30
55A0813-22-* 22 19 x 34 .029 .031 16.0 .050 .002 3.20
55A0813-20-* 20 19 x 32 .037 .039 9.77 .058 .002 4.70
55A0813-18-* 18 19 x 30 .046 .049 6.10 .070 .003 7.20
55A0813-16-* 16 19 x 29 .052 .055 4.76 .077 .003 9.00
55A0813-14-* 14 19 x 27 .065 .069 3.00 .094 .003 13.8
55A0813-12-* 12 37 x 28 .084 .089 1.98 .111 .003 20.5
55A0813-10-* 10 37 x 26 .106 .113 1.24 .134 .004 32.4
55A0813-8-* 8 133 x 29 .158 .173 .694 .195 .008 64.2
55A0813-6-* 6 133 x 27 .198 .217 .436 .241 .010 96.8
55A0813-4-* 4 133 x 25 .250 .274 .275 .310 .010 163.
55A0813-2-* 2 665 x 30 .320 .340 .177 .408 .012 256.
55A0813-1-* 1 817 x 30 .360 .380 .144 .470 .012 325.
55A0813-0-* 0 1045 x 30 .395 .425 .113 .510 .016 427.
55A0813-00-* 00 1330 x 30 .440 .475 .089 .570 .016 531.
55A0813-000-* 000 1665 x 30 .500 .540 .071 .610 .016 616.
55A0813-0000-* 0000 2109 x 30 .565 .605 .056 .675 .022 763.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE Connectivity (logo), and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
Redwood City, CA 94063-3800
Page 1 of 2
Phone: 1-800-522-6752
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
Fax: 1-650-361-6297
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
2008-2017 Tyco Electronics Corporation. All rights reserved.
Page Revision SCD
SPECIFICATION CONTROL DRAWING
55A0813
2 of 2 S
TABLE II. PERFORMANCE DETAILS
MANDREL DIAMETER WEIGHT
(inch) ( 3%) (lb) ( 3%)
PART
NUMBER
LIFE CYCLE, LIFE CYCLE,
COLD COLD
1/
IMMERSION, AND IMMERSION, AND
BEND BEND
ACCELERATED AGING ACCELERATED AGING
55A0813-26-* .375 1.00 .500 3.00
55A0813-24-* .500 1.00 .750 3.00
55A0813-22-* .500 1.00 1.00 3.00
55A0813-20-* .500 1.00 1.50 4.00
55A0813-18-* .750 1.50 2.00 4.00
55A0813-16-* 1.00 1.50 2.00 5.00
55A0813-14-* 1.00 2.00 3.00 5.00
55A0813-12-* 1.50 2.00 3.00 5.00
55A0813-10-* 2.00 3.00 3.00 5.00
55A0813-8-* 3.00 4.00 4.00 6.00
55A0813-6-* 4.00 5.00 4.00 10.0
55A0813-4-* 5.00 6.00 4.00 10.0
55A0813-2-* 6.00 8.00 6.00 15.0
55A0813-1-* 8.00 10.0 6.00 15.0
55A0813-0-* 8.00 10.0 6.00 15.0
55A0813-00-* 10.0 12.0 8.00 20.0
55A0813-000-* 10.0 12.0 8.00 20.0
55A0813-0000-* 10.0 12.0 8.00 20.0
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200C INSULATION RESISTANCE:
Maximum continuous conductor temperature 5000 megohms for 1000 ft. (minimum), AWG 26-10
VOLTAGE RATING: 600 volts (rms) at sea level 3000 megohms for 1000 ft. (minimum), AWG 8-0000
ACCELERATED AGING (CROSSLINKING PROOF): INSULATION THICKNESS:
300 3C for 7 hours 0.003 in. (minimum) for primary insulation
BLOCKING: 230 3C for 24 hours 0.004 in. (minimum) for outer jacket
COLOR: White preferred 0.009 in. (minimum) for total insulation
CONCENTRICITY: 70% (minimum) LIFE CYCLE: 230 3C for 500 hours
FLAMMABILITY: Procedure 1, LOW TEMPERATURE-COLD BEND: -65 3C for 4 hours
3 seconds (maximum), 3 inches (maximum); SHRINKAGE: 230 3C for 6 hours,
no flaming of facial tissue 0.125 in. (maximum) in 12 inches
HUMIDITY RESISTANCE: Insulation Resistance, SMOKE TEST: 250 5C, no visible smoke
5000 megohms for 1000 ft. (minimum), AWG 26-10 SURFACE RESISTANCE:
3000 megohms for 1000 ft. (minimum), AWG 8-0000 500 meghoms-in. (minimum), both readings
IDENTIFICATION, COLOR STRIPING, AND BAND DURABILITY: THERMAL SHOCK RESISTANCE: 200 3C,
125 cycles (250 strokes) (minimum), 500 g weight 0.060 in. (maximum), AWG 26-12
IMMERSION: Diameter increase 5% (maximum); 0.100 in. (maximum), AWG 10-8
no cracking, no dielectric breakdown 0.125 in. (maximum), AWG 6-0000
INSULATION ELONGATION AND TENSILE STRENGTH: VOLTAGE WITHSTAND (Post Environmental):
Elongation, 2500 volts (rms), 60 Hz
125% (minimum) for primary insulation, AWG 26-10 only WICKING: 2.25 in. (maximum)
75% (minimum) for total insulation (primary insulation & jacket) WRAP TEST: 313 3C for 2 hours
Tensile Strength,
2
5000 lbf/in (minimum) for primary insulation 1/ PART NUMBER:
2
5000 lbf/in (minimum) for total insulation (primary insulation & jacket) The in the part numbers in Tables I and II shall be replaced
INSULATION FLAWS: by a color code designator.
Primary Insulation, Example: AWG 22, white: 55A0813-22-9
Spark Test, 1.5 kV (rms) at 60 Hz; 4.2 kV (rms) at 3 kHz AWG 22, white with a black stripe: 55A0813-22-90
Impulse Dielectric Test, 6.0 kV (peak)
Finished Wire,
Spark Test, 5.7 kV (rms) at 3 kHz
Impulse Dielectric Test, 8.0 kV (peak)
1/ See footer section on page 1