Instruction Sheet
Wire Support Replacement Kits
229284-1 and 229284-2 for
408-7670
Model MA-6 Applicator
17 FEB 12 Rev D
Replacement Kit 229284-1 Replacement Kit 229284-2
Wire Support
Wire Support
Crimpers
Assembly
Assembly Crimpers
Applicator Applicator
Frame
Frame
Wire Support
Wire Support (Qty: 1)
(Qty: 1 Left, 1 Right)
(Shown Folded)
Spacer (Qty: 2) Spacer (Qty: 2)
Bracket (Qty: 2) Bracket (Qty: 2)
Lockwasher (Qty: 2)
Lockwasher (Qty: 2)
Socket Head Cap Screw (Qty: 2) Socket Head Cap Screw (Qty: 2)
APPLICATOR
REPLACEMENT KIT
PART NUMBER CONNECTOR TYPE CUSTOMER MANUAL
229284-1 247329-1 (MA-6B) Standard
409-5135
229284-2 247329-3 (MA-6M) Mini
Figure 1
1. INTRODUCTION 3. Place a spacer in each mounting hole of the wire
support.
The wire support replacement kits are used to replace
a damaged wire support assembly on Model MA-6 4. Refer to Figure 1 for orientation, and fit the
applicator. Refer to Figure 1. bracket over the wire support. Mount the assembly
to the applicator using the lockwashers and socket
Reasons for reissue of this instruction sheet are
head cap screws. Do not tighten the screws.
provided in Section 4, REVISION SUMMARY.
For Kit 229284-2, make sure that the long section of
the wire support faces the frame of the applicator.
2. DESCRIPTION
5. Adjust the assembly so that the top surface of the
The kits contain the components shown in Figure 1.
bracket is flush with the top surface of the crimpers.
Hand-tighten the screws.
3. REPLACEMENT
Perform the following steps for each side of the
4. REVISION SUMMARY
applicator:
Revisions to this instruction sheet include:
1. Remove the components of the wire support
Changed company name and logo
assembly from the applicator. Discard them.
Removed trademarked name of applicator
2. If installing Kit 229284-2, fold the two sections of
the wire support together (do not cut the hinge).
2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change.
1 of 1
All Rights Reserved PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service,
*Trademark visit our website at www.te.com
LOC B
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.