242W063-25-0 Heat Shrink Boots, 45 , Molded Part Shape Code 242, Lipped, 25, 25, Operating Temperature Range -75 150 C -103 302 F 242W063-25-0 ACTIVE Raychem TE Internal : 045788-000 Heat Shrink Boots, 45 , Molded Part Shape Code 242, Lipped, 25, 25, Operating Temperature Range -75 150 C -103 302 F View on TE.com> Wire Protection & Management > Heat Shrink Molded Shapes > Heat Shrink Boots > Heat Shrink Boots: Poly Mold, Lipped Molded Part Angle: 45 Molded Part Shape Code: 242 Lipped: Yes Material Code: 25 Heat Shrink Boot Material Systems Code: 25 All Heat Shrink Boots: Poly Mold, Lipped (66) Features Product Type Features Molded Part Angle 45 Configuration Features Lipped Yes Body Features Material Code 25 Heat Shrink Boot Material Systems Code 25 Adhesive Pre-Coat No Material Fluid Resistant Modified Elastomer Dimensions Inside Diameter as Supplied 43 mm 1.69 in Cable Diameter Range 27.9 43 mm 1.1 1.69 in Usage Conditions Operating Temperature Range -75 150 C -103 302 F Operation/Application Power Cable Accessory No Industry Standards Approved Standards VG95343 Parts 6,7,8 and 9 10/26/2021 01:01PM Page1 For support call+1 800 522 6752 242W063-25-0 Heat Shrink Boots, 45 , Molded Part Shape Code 242, Lipped, 25, 25, Operating Temperature Range -75 150 C -103 302 F Approved Standards VG95343 Parts 6,7,8 and 9 Other Molded Part Shape Code 242 Fluid & Chemical Resistance Long-Term Fluid Exposure at High Temperatures Adhesive Type Adhesive Purchased Separately Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUL 2021 (219) Candidate List Declared Against: JUL 2021 (219) Does not contain REACH SVHC Halogen Content Out of Scope - excluded from Halogen requirements Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on requirements for substances in articles posted at this URL: