2-6609985-2 TE Connectivity

Power Inlet Filters & Power Entry Modules Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Cost-eective Medium Performance Power Inlet Filter EEJ Series Including the EJH/EJHS, EJM/EJMS and EJS Models UL Recognized CSA Certied 20EJH1 VDE Approved* 3EEJ1 20EEJ8 EEJ Series Specications Compact EMI lter with IEC 60320-1 C14 Inlet Maximum leakage current each Line to Ground: EEJ/EJS EJH EJM Enhanced two element circuit provides medium @ 120 VAC 60 Hz: .22 mA 2 A .01 mA attenuation to 30MHz @250 VAC 50 Hz: .38 mA 5 A .017 mA Compact and cost-effective design Hipot rating (one minute): Supersedes most ED Series versions Line to Ground: 2250 VDC 3 Line to Line: 1450 VDC Includes 20A version with standard IEC 60320-1 C20 inlet Rated Voltage (max.): 250 VAC Several termination styles Operating Frequency: 50/60 Hz Flanged mounting Rated Current: 1 to 20A* Operating Ambient Temperature Range EJS Models (at rated current I ): -10C to +40C r Same performance as the EEJ Series In an ambient temperature (T ) higher than +40C a Snap-in mounting the maximum operating current (I ) is calculated as o Several termination styles follows: I = I (85-Ta)/45 o r Includes 20A version with standard IEC 60320-1 C20 inlet EJH & EJHS Models Electrical Schematic Minimal leakage current suitable for patient- contact medical applications LINE LOAD Flanged mounting the same as the EEJ Series Also available in snap-in versions (EJHS) 1 Two element circuit provides modest EMI attenuation above 1MHz 1 Capacitive input (refer to the H Series for capacitive output) EJHS models feature snap-in mounting Note 1: Not present in EJH versions EJM & EJMS Models Low leakage current, suitable for most medical *15A versions are tested by Underwriters Laboratories applications to US and Canadian requirements and are Improved EMI attenuation up to 200MHz VDE approved at 10A, 250VAC 20A versions are tested by Underwriters Laboratories Mechanically the same as the EEJ Series with to US and Canadian requirements and are ange or snap-in mounting VDE approved at 16A, 250VAC EJMS models feature snap-in mounting 153 Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specications subject to change.Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Cost-eective Medium Performance Power Inlet Filter (continued) EEJ Series Including the EJH/EJHS, EJM/EJMS and EJS Models Ordering Information Available Part Numbers EEJ Models EJH Models 1EEJ1 1EJH1 3 EEJ 1 1EEJ2 1EJH2 1EEJP 1EJHP Output Styles 1EEJ8 1EJH8 1 .250 [6.3] spade terminals 3EEJ1 3EJH1 (back) 3EEJ2 3EJH2 2 .250 [6.3] spade terminals 3EEJP 3EJHP (bottom) 3EEJ8 3EJH8 P PC board pins 6EEJ1 6EJH1 8 Wire leads 6EEJ2 6EJH2 6EEJP 6EJHP Series 6EEJ8 6EJH8 EEJ Enhanced EMI Inlet Filter 10EEJ1 10EJH1 EJS EEJ in Snap-in Mounting 10EEJ2 10EJH2 EJH Enhanced Medical Inlet Filter 10EEJP 10EJHP EJHS EJH in Snapin Mounting 10EEJ8 10EJH8 EJM Extended Performance 15EEJ1 15EJH1 Medical Inlet Filter 15EEJ2 15EJH2 EJMS EJM in Snap-in Mounting 15EEJP 15EJHP 15EEJ8 15EJH8 Current Rating 20EEJ1 20EJH1 1, 3, 6, 10, 15 or 20A 20EEJ8 20EJH8 EJS Models EJHS Models 1EJS1 1EJHS1 1EJS8 1EJHS8 Accessories 3EJS1 3EJHS1 3EJS8 3EJHS8 GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord 6EJS1 6EJHS1 6EJS8 6EJHS8 10EJS1 10EJHS1 10EJS8 10EJHS8 15EJS1 15EJHS1 15EJS8 15EJHS8 20EJS1 20EJS8 FA601: Insulating Shroud .413 EJM Models EJMS Models Dia. 10.5 .271 Dia. 1EJM1 1EJMS1 6.9 1EJM8 1EJMS8 .118 3EJM1 3EJMS1 3.0 1.39 3EJM8 3EJMS8 35.4 6EJM1 6EJMS1 1.17 .767 6EJM8 6EJMS8 29.7 19.5 10EJM1 10EJMS1 10EJM8 10EJMS8 15EJM1 15EJMS1 15EJM8 15EJMS8 154 Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specications subject to change.