27E487 TE Connectivity

General Purpose Accessories Potter & Brumfield Sockets & Accessories, K10 Relays n Sockets for 2 pole relays with solder terminals n Solder, PCB or screw terminal sockets n Hold down springs n Plates and brackets permit various mounting options Approvals UL E59244, CSA LR15734 Ordering Code Technical data of approved types on request Product Poles Terminal type Part Technical Data Code number Socket contact material Spring brass, tin plated 27E488 2 solder terminals 2-1419106-0 Socket body material 27E489 2 PCB terminals 2-1419106-1 Solder and PCB terminal models Nylon Screw terminal models Glass-filled polyester Maximum current 10A Dimensions 27E488 socket with solder terminals 27E489 socket with printed circuit terminals .440 .440 .844 (11.18) .075 .844 (21.44) (11.18) .075 (1.90) (21.44) (1.90) 1.158 .012 1.158 .012 (29.41) (29.41) (0.30) (0.30) .072 x .140 (1.83 x 3.56) .184 (4.69) .070 (1.78) .770 (19.56) .078 (1.98) Caution: Printed circuit sockets are manufactured withfloatin (Loose) terminals. This Recommended chassis cutout for solder terminal socket 27E488 permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of .850 .005 the copper conductor from the printed circuit board when a relay is inserted in the socket (21.79 .13) after soldering. Recommended Chassis Thickness PC board layout (bottom view) for PCB terminal socket 27E489 .039 (.99) to .079 (2.01) 1.015 .005 (28.07 .13) .086 DIA. TYP507 (2.18) (12.88) .113 (2.87) .417 .672 (10.59) (17.07) .185 (4.70) .620 (15.75) 457 10-2012, Rev. 1012 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2012 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Accessories Potter & Brumfield Sockets & Accessories, K10 Relays (Continued) Ordering Code Ordering Code Product Terminal type Mounting Part Product Description Part Code number Code number 27E895 screw terminals DIN rail snap mount 2-1419106-7 20C217 Relay hold down spring - 1419111-2 27E487 Conventional 1-1419106-9 use with 27E488 and 27E489 20C426 Relay hold down spring - 5-1393159-1 Dimensions and terminal location use with 27E487 and 27E895 37D633 Mounting strip - accepts eight 27E488 1419111-7 Screw terminal, DIN rail, snap-mount socket 27E895 24A110 Mounting track 1419111-6 24A071 Steel mounting clip with 6-32 screw - 1419111-5 1.036 use with 27E487 on 24A110 track (26.31) 4 3 24A072 Plastic twist mounting clip - 5-1393159-4 use with 27E487 on 24A110 track 1.299 40G432 Plastic insulator - use with 24A071 to make 9-1393159-5 (32.99) end clip for 24A110 track 2 1 All accessories must be ordered separately. 2.598 (65.99) Dimensions B A .170 TYP. 37D633 mounting strip (4.32) 8 7 1.388 .629 (35.26) (15.98) 1.323 .090 R. 1.388 6 5 .315 TYP25 (33.60) (35.26) (2.29) .669 (8.00) (6.4) (16.99) .617 Top view 1.178 (15.67) (29.92) 1.750 (44.45) 1.015 .995 (25.78) .090 (25.27) (2.29) .16 .429 .180 (10.90) (4.1) (4.57) .858 .32 (21.79) .065 (8.1) (1.65) .13 (3.3) 37D633 will mount eight solder terminal sockets in one length of aluminum strip measuring Screw terminal socket 27E487 10.97 x 2.25 x .062 (278.6 x 57.15 x 1.57) 1.130 (28.70) 24A110 DIN rail style mounting track 4 3 1.375 (34.93) 36.00 .060 (914.4 1.52) 1.375 .010 3.00 6.00 1 2 2.750 (34.93 .254) (76.2) (152.4) (69.85) .156 TYP. (3.96)750 .187 .405 .007 8 7 (19.05) (4.75) (10.29 .178) .313 TYP. 24A110 mounting track is designed to accept snap-mount sockets, as well as other P&B (7.94) 6 5 screw terminal sockets. Track is made of lightweight, sturdy extruded aluminum and is shipped in three-foot (914cm) lengths with mounting holes on six-inch (152mm) centers. Top view 1.385 Track can be cut to shorter lengths or used end-to-end. (35.18) .312 1.045 (7.92) (26.54) Track and mounting accessories .200 (5.08) 24A110 40G432 24A072 24A071 458 10-2012, Rev. 1012 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2012 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.