General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush n 1 pole 16A, 1 form C (CO) or 1 form A (NO) contact n For inrush peak currents up to 80A n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Ambient temperature 85C Typical applications Domestic appliances, heating control, lighting control F0177-C Zb Approvals Coil Data, DC coil VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Coil voltage range 5 to 110VDC Technical data of approved types on request Operative range, IEC 61810 2 Coil insulation system according UL class F Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Coil versions, DC coil Rated voltage 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 400VAC code voltage voltage voltage resistance power 1) Rated current 16A VDC VDC VDC 10% mW Limiting continuous current 16A, UL: 20A (K-version) 005 5 3.5 0.5 62 403 Limiting making current, 006 6 4.2 0.6 90 400 max. 4s, df 10% 30A 012 12 8.4 1.2 360 400 max. 20ms (incandescent lamps), RT33L version 80A 024 24 16.8 2.4 1440 400 Breaking capacity max. 4000VA 048 48 33.6 4.8 5520 417 1) Contact material AgNi90/10, AgSnO 060 60 42.0 6.0 8570 420 -1 1) Coil resistance 12%. Frequency of operation, with/without load 360/72000h All figures are given for coil without pre-energization, at ambient temperature +23C. Operate/release time max., DC coil 9/6ms Other coil voltages on request. Operate/Reset time max., bistable version 10/10ms Bounce time max., form A/form B 3/6ms Contact ratings Type Contact Load Cycles IEC 61810 3 RT33L A (NO) 16A, 250VAC resistive, 85C 50x10 3 RT33K A (NO) 16A, 250VAC resistive, 85C 30x10 UL 508 3 RT33K A (NO) 20A, 277VAC general purpose, 40C 10x10 3 RT33L A (NO) 16A, 250VAC resistive, 85C 50x10 3 RT33L A (NO) 1000W Tungsten, 120VAC, 60 Hz, 40C 6x10 RT33L A (NO) 1000W standard ballast, 3 120VAC, 60 Hz, 40C 6x10 Mechanical endurance monostable version >30x106 operations bistable version >5x106 operations Coil Data, bistable coils 1 coil 2 coils Magnetic system polarized, bistable Coil voltage range 5 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration 30ms/1min at <10% duty factor Coil insulation system according UL class F 1 03-2012, Rev. 0312 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush (Continued) Coil Data (continued) Insulation Data Initial dielectric strength Coil versions, bistable coil between open contacts 1000V rms Coil Rated Set Reset Coil Rated coil between contact and coil 5000V rms code voltage voltage voltage resistance power Clearance/creepage VDC VDC VDC 10% mW between contact and coil 10/10mm bistable, 1 coil Material group of insulation parts IIIa A05 5 3.5 2.8 62 403 Tracking index of relay base PTI 250V A06 6 4.2 3.3 90 400 A12 12 8.4 6.6 360 400 A24 24 16.8 13.2 1440 400 Other Data bistable, 2 coils Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content F05 5 3.5 2.8 42 595 refer to the Product Compliance Support Center at F06 6 4.2 3.3 55 655 www.te.com/customersupport/rohssupportcenter F12 12 8.4 6.6 240 600 Ambient temperature -40 to 85C F24 24 16.8 13.2 886 650 Category of environmental protection All figures are given for coil without pre-energization, at ambient temperature +23C. IEC 61810 RTII - flux proof Other coil voltages on request. Vibration resistance (functional), Bistable coils - operation form A/form B contact, 30 to 500Hz 20/5g Version 1 coil 2 coils Shock resistance (destructive) 100g 2) Coil terminals A1 A2 A1 A3 A2 Terminal type PCB-THT, plug-in Operate + - + - Weight 14g Reset - + - + Resistance to soldering heat THT Contact position not defined at delivery IEC 60068-2-20 270C/10s Packaging/unit tube/20 pcs., box/500 pcs. 2) socket available for 1 coil version only, see Accessories Accessories 2) For details see datasheet Accessories Industrial Power Relay RT Socket available for 1 coil version only. NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1) for relays mounted on sockets deratings may apply. Dimensions S0272-BC 2 03-2012, Rev. 0312 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company