317 Cable Assembly DIMENSIONS DESCRIPTION IEPE plug and play accelerometer cable assembly for triaxial accelerometers. Featuring 4-pin Microtech connector to pigtail leads. Standard cable length is 120 inches. Mates with accelerometer models 7131A, 7132A & 7134A. FEATURES APPLICATIONS TPE Jacket IEPE Triaxial Accelerometers PFA Insulated 28 AWG Conductors Laboratory Testing SPC Braided Shield Vibration Monitoring 4-Pin Microtech Connector General Purpose -54C to +125 C Temp Range Model Testing 317 www.meas-spec.com December 2013 1/2 317 Cable Assembly ORDERING CODE 317-ZZZ (-ZZZ designates length in inches, -120 standard) NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc. Measurement Specialties Measurement Specialties 1000 Lucas Way (Europe) Ltd. (China), Ltd. Hampton, VA 23666 26 Rue des Dames No. 26 Langshan Road USA F78340 Les Clayes-sous-Bois Shenzhen High-Tech Park (North) Sales and Customer Service France Nanshan District Tel: +1-800-745-8008 or Sales and Customer Service Shenzhen, China 518057 Sales and Customer Service +1-757-766-1500 Tel: +33 (0) 1 79 33 00 Fax: +1-757-766-4297 Fax: +33(0)1 34 81 03 59 Tel: +86 755 3330 5088 t&m meas-spec.com t&m meas-spec.com Fax: +86 755 3330 5099 t&m meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customers technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 317 www.meas-spec.com December 2013 2/2