GLASS WIRE WOUND SENSOR TYPE GX RTD Temperature Sensor SPECIFICATIONS Temperature sensor Large temperature range From -200C to +400C No hysteresis High vibrations resistant Resistant to external forces and pressures Small dimensions High temperature stability Short response time One or two platinum bands layout are wounded on a glass tube and are protected from environment by a glass layer 09/2015 SENSOR SOLUTIONS ///GLASS WIRE WOUND SENSOR TYPE GX Page 1 GLASS WIRE WOUND SENSOR TYPE GX RTD Temperature Sensor FEATURES Nominal value: 100 at 0C Tolerance according to IEC 60751: class W 0.3, W 0.15 and W 0.1 Temperature coefficient = 3850 ppm/K Closer tolerances in restricted temperature range Connection wires: Platinum coated nickel The lead wires connection is pull up force resistant Housing advise: To be used preferably in dry environment Options: - Lead wires length - Extension cable APPLICATIONS Environments subject to high vibrations Cryogenics Accurate temperature measurement with high temperature gradient Limited mounting space required Food industry H.V.A.C. PERFORMANCE SPECIFICATIONS Self- Desi- Nominal Response time (s) Type Reference L WL D AL1 AL2 A heating gnation reference in air (Ohm at 0C) (Dimensions in mm) (K/mW) Water Air v = 0,4 m/s v = 1 m/s t0,5 t0,9 t0,5 t0,9 Tolerance Class W 0.3 = (0.3+0.005 ItI) From -196C to + 400C 1Pt100 GX 518 32 205 108 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1013 32 205 113 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12 1Pt100 GX 1018 32 205 118 100 10 6 1.8 10 - 0,20 0.36 0.14 0.35 8 30 1Pt100 GX 1218 34 015 120 100 12 3 1.8 6 - 0,20 0.36 0.14 0.35 8 30 1Pt100 GX 1513 SB0921 100 15 6 1.3 10 - 0,20 0.39 0.4 1.3 4 12 2Pt100 GX 1528 32 205 228 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 12 45 Tolerance Class W 0.15 = (0.15+0.002 ItI) From -100C to + 250C 1Pt100 GX 518 32 205 074 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1013 32 205 458 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12 1Pt100 GX 1218 34 015 121 100 12 3 1.8 6 - 0,20 0.36 0.14 0.35 8 30 1Pt100 GX 1513 SB0920 100 15 6 1.3 10 - 0,20 0.39 0.4 1.3 4 12 2Pt100 GX 1528 32 205 241 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 12 45 Tolerance Class W 0.1 = (0.1+0.0017 ItI) From 0C to + 150C 1Pt100 GX 518 32 205 101 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1013 32 205 463 100 10 6 1.3 10 - 0.20 0.39 0.4 1.3 4 12 1Pt100 GX 1218 34 015 123 100 12 3 1.8 6 - 0,20 0.36 0.14 0.35 8 30 1Pt100 GX 1513 SB0919 100 15 6 1.3 10 - 0,20 0.39 0.4 1.3 4 12 09/2015 SENSOR SOLUTIONS /// GLASS WIRE WOUND SENSOR TYPE GX Page 2