4024-10-441112-CS9061 TE Connectivity

CUSTOMER DRAWING KIT COMPONENTS: A standard kit shall contain 1 piece each: Adapter, Boot, SolderShield Splice, Atum tubing (Kit description ends inA only) 1. ADAPTER (STRAIGHT, 45 OR 95 DEGREE). Refer to TXR (XX) Adapter drawings for details where (XX) = Adapter Code. Available Adapter Codes (XX): 15, 18, 21, 30, 32, 40, 41, 54, 61 2. MOLDED BOOTS. Available Sizes: 13, 23, 34, 44, 56, 67. : 3. SolderShield SPLICES. Available Sizes: 00, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 16. Use code 00 when a non-pre-braided adapter is used. (Pre-Braided Code - 0). 4. SHIM TUBING. (KIT DESCRIPTIONS END WITH LETTER A ONLY) EXPANDED AS SUPPLIED FULLY RECOVERED AFTER HEATING TITLE: T-FIT ADAPTER AND MOLDED BOOT KITS DOCUMENT NO.: Unless otherwise specified dimensions are in inches. Raychem Metric dimensions are shown in brackets Devices T-FIT-2-12X ANGLES: 030 TOLERANCES: Tyco Electronics Corporation reserves the right to amend this drawing at any REV: REV DATE: 0.00 0.02 MM ROUGHNESS time. Users should evaluate the January 18, 2018 0.0 0.2 MM AN IN MICRON suitability of the product for their 0 0.5 MM application. PREPARED BY: CAGE CODE: ECO NUMBER: SCALE: SIZE: SHEET: YNGUYEN 06090 ECO-18-000887 NTS A 1 of 2 2007-2018 TE Connectivity Corp. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. CUSTOMER DRAWING ADAPTER PART NUMBER KEY 08 06 40 -1 0- 23 10 A Adapter Code A = Shim included Blank = Shim not included Adapter Shell Size Order Number Adapter entry size Connector Manufacturer Code (Code 18 Only) Device size designator = Not Applicable00 for non-prebraided adapter, Code0 1 = with pre-braid adapter and a device Boot size designator 0 = Non-pre-braided adapter and no device Adapter Angle: Field Separator 0 = straight 1 = 45 degree 2 = 90 degree Unless otherwise specified dimensions are in millimeters. (Inches dimensions are shown in brackets) DOCUMENT NO.: REV: ECO NUMBER: DATE: SHEET: AN ECO-18-000887 18-Jan-2018 2 of 2 T-FIT-2-12X If this document is printed it becomes uncontrolled. Check for the latest revision.