4030-002-120 TE Connectivity

te.com MODEL 4030 TRIAXIAL MEMS DC ACCELEROMETER Specifications Triaxial Capacitive MEMS Accelerometer 2g & 6g Dynamic Ranges Low Cost, Great Value Rugged Molded Housing Self-Test Enabled The TE Connectivity model 4030 is a low noise, signal conditioned DC accelerometer packaged in a durable molded housing with brass mounting inserts. The accelerometer is offered in 2g & 6g dynamic ranges with a nominal 0-200Hz bandwidth. The capacitive silicon Features MEMS sensing element offers high resolution and long term stability Capacitive Silicon MEMS Sensor with minimal non-linearity. Low Pass Filtered Output The model 4030 accelerometer incorporates a rugged integral cable Linearity <0.5% assembly with braided shield and PVC jacket. The sensor is fully encapsulated in potting for environmental sealing in critical 5-30Vdc Excitation Voltage measurement applications. The accelerometer also includes a self-test IP65 Environmentally Sealed feature for remote verification of sensor integrity. Integral Rugged Cable Applications Low Frequency Vibration Monitoring Tilt & Inclination Measurement Motion Measurements Lab Testing Structural Monitoring CLICK HERE CONNECT WITH A SPECIALIST TE CONNECTIVITY SENSORS /// MODE 4030 ACCELEROMETER 04/2021 Page 1 MODEL 4030 ACCELEROMETER Performance Specifications All values are typical at +24C, 80Hz and 5Vdc excitation unless otherwise stated. TE Connectivity reserves the right to update and change these specifications without notice. PARAMETERS DYNAMIC NOTES Range (g) 2 6 Sensitivity (mV/g) 1000 333 10% Frequency Response (Hz) 0-200 0-200 5%, All Axes Frequency Response (Hz) 0-600 0-600 1dB, All Axes Transverse Sensitivity (%) <3 <3 Non-Linearity (%FSO) 0.5 0.5 BFSL Shock Limit (g) 2000 2000 Residual Noise (V rms) 600 240 Passband Spectral Noise (g/Hz rms) 42 51 Self Test Output Change (mV) X = +210 90 X = +70 30 Ground ST Lead Y = -210 90 Y = -70 30 Z = -340 190 Z = -110 65 ELECTRICAL Zero Acceleration Output (V) 2.5 0.1 Excitation Voltage (Vdc) 5 to 30 Excitation Current (mA) 4 Full Scale Output Voltage (Vdc) 2 Ground Isolation Isolated from mounting surface ENVIRONMENTAL Thermal Zero Shift (%FSO) 4 From -40 to +85C Thermal Sensitivity Shift (%) 5 From -40 to +85C Operating Temperature -40 to +85C (-40 to +185F) Humidity Epoxy Sealed, IP65 PHYSICAL Housing Material Nylon 6-6, 30% GF Molded Housing, Brass Inserts at Mounting Holes Cable 6 x 0.14mm Conductors PVC Insulated, Braided Shield, PVC Jacket Weight (grams) 50 Cable not included Mounting 2x 1/4inch or M6 Metric Screws Mounting Torque 18 lb-in (2.0 N-m) Optional accessories: 121 3-Channel Precision Low Noise DC Amplifier TE CONNECTIVITY SENSORS /// MODEL 4030 ACCELEROMETER 04/2021 Page 2