4-1393224-1 TE Connectivity

General Purpose Relays SCHRACK Miniature Power PCB RY II & RY II reflow-solderable 1 pole 8 A, 1 CO or 1 NO or 1 NC contact Low component height 12.3 mm 5 kV / 8 mm coil-contact Reinforced insulation (protection class II) Pinnings: 3.2 and 5 mm reflow-solderable version Sockets with PCB-type terminals Especially suitable for resistive and inductive loads on NO and NC contacts Plastic materials according to IEC60335-1 (domestic appliances) (not at reflow-solderable version) F0142-F RoHS compliant (Directive 2002/95/EC) as per product date code 0403 Applications: heating control, interface technology, domestic appliances, timers, temperature control Approvals V REG.-Nr. 5358, Z E214025 Technical data of approved types on request Contact data Contact configuration 1 CO or 1NO or 1NC Contact set single contact Type of interruption micro disconnection Rated current 8 A Rated voltage / max. switching voltage AC 250/400 VAC Maximum breaking capacity AC 2000 VA Contact material AgNi0,15, AgSnO2, AgCdO 6 Mechanical endurance 30x10 cycles -1 Rated frequency of operation with / without load 6 / 1200 min Contact ratings Type Load Cycles 5 RY**1*** NO, 8 A, 250 VAC, resistive, 70C 1x10 4 RY**1*** NC, 8 A, 250 VAC, resistive, 70C 5x10 4 RY**(0,1,2)*** 8 A, 30 VDC, UL 508 3 x10 4 RY**(0,1,2)*** 0,28 A, 250 VDC, UL 508 3 x10 RY**(0,1,2)*** 1/2 HP, 240 VDC, UL 508 RY**(0,1,2)*** 1/4 HP, 120 VDC, UL 508 3 RY**(0)*** 8 A, 415 VAC, resistive, UL 508 6 x10 RY**(0,1,2)*** Pilot duty - B300, UL 508 6000 3 RY*** *** CO, 8 A, 250 VAC, resistive, 70C 5x10 5 RY**1 *** 6(4)A, 250 VAC, 85C, EN60730 1x10 Coil data Rated coil voltage range DC coil 5...60 VDC Coil power DC coil typ. 220 mW Operative range 2 Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 005 5 3,5 0,5 112+10% 223 006 6 4,2 0,6 162+10% 222 009 9 6,3 0,9 320+10% 253 012 12 8,4 1,2 627+10% 230 024 24 16,8 2,4 2350+10% 245 048 48 33,6 4,8 9391+10% 245 060 60 42,0 6,0 14000+10% 257 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request 1 Datasheet Rev. HC1 Dimensions are in mm unless Product specification processing information Schrack section. Issued 2008/03 otherwise specified and are according to IEC 61810-1. only to be used together www.tycoelectronics.com shown for reference purposes Product data, technical para- with the Definitions at Specifications subject to www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.General Purpose Relays SCHRACK Miniature Power PCB RY II & RY II reflow-solderable (Continued) Insulation CO contact NO contact PCB layout / terminal assignment Dielectric strength coil-contact circuit 5000 Veff Bottom view on solder pins open contact circuit 1000 Veff Clearance / creepage coil-contact circuit W 8 / 8 mm 1 CO contact, 3.2 mm Material group of insulation parts IIIa Tracking index of relay base PTI250, PTI 175* Insulation to IEC 60664-1 Type of insulation coil-contact circuit reinforced open contact circuit functional Rated insulation voltage 250 V 250 V Pollution degree 3 2 3 Rated voltage system 230 V 400 V 230 / 400 V Overvoltage category III III S0254-AA Other data RoHS - Directive 2002/95/EC compliant as per product date code 0403 Flammability class according to UL94 V-0 GWFI to IEC 60335-1 > 850 C** GWT to IEC 60335-1 > 750 C** Ambient temperature range -40...+70C S0254-AB Ambient temperature max. 85C at 6A Operate- / release time typ. 7 / 3 ms Bounce time NO / NC contact typ. 2.5 / 4.5 ms 1 NO, 1 NC contact 5 mm Vibration resistance (function) NO / NC contact 20 / 5 g Shock resistance (function) NO / NC contact 20 / 5 g Shock resistance (destruction) 100 g Category of protection RTII-flux proof, RTIII- wash tight** Mounting pcb Mounting position any Minimum mounting distance W 0mm Soldering heat resistance flux proof version 270C / 10 s wash tight version 260C / 5 s Relay weight 8 g Packaging unit 20 / 500 pcs S0254-AC Accessoires For technical details see datasheet Accessoires RYII * reflow-solderable version ** not as reflow-solderable version Pinning 3.2 mm Dimensions S0254-AE S0274-CA S0254-AD Pinning 5 mm S0254-AF S0274-CB 2 Datasheet Rev. HC1 Dimensions are in mm unless Product specification processing information Schrack section. Issued 2008/03 otherwise specified and are according to IEC 61810-1. only to be used together www.tycoelectronics.com shown for reference purposes Product data, technical para- with the Definitions at Specifications subject to www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.