4-1415535-9 TE Connectivity

General Purpose Relays PCB Relays SCHRACK Miniature PCB Relay PE n 1 pole 5 A, 1 form C (CO) or 6A, 1 form A (NO) contact n Cadmium-free contacts n Sensitive coil 200mW n Ambient temperature 85C n Low height 10.0mm n Plastic materials according to IEC 60335-1 (domestic appliances) Typical applications F0169-C Industrial electronics, white goods, measurement and control Z 6 Approvals Mechanical endurance, DC coil >15x10 operations. VDE Cert. No. 40011901, UL E214025 Technical data of approved types on request Coil Data Contact Data Coil voltage range 5 to 48 VDC Contact arrangement 1 form C (CO) or 1 form A (NO) Operative range, IEC 61810 2 Rated voltage 250VAC Max. switching voltage 400VAC Coil versions, DC coil Rated current 5A (CO - types) Coil Rated Operate Release Coil Rated coil 6A (NO - types) code voltage voltage voltage resistance power Breaking capacity max. 1250VA (CO - types) VDC VDC VDC 10% mW 1500VA (NO - types) 3 3 2.25 0.3 45 200 Contact material AgNi 90/10, AgSnO 5 5 3.8 0.5 125 200 2 Frequency of operation 6 6 4.5 0.6 172 209 with/without load 360/72000 ops/h 9 9 6.8 0.9 405 200 Operate/release time typ. 8/8ms 12 12 9.0 1.2 685 210 Bounce time, form A/form B typ. 4/6ms 24 24 18.0 2.4 2725 211 48 48 36.0 4.8 10970 210 Contact ratings Type Contact Load Cycles IEC 61810 3 PE013 C (CO) 5A, 250VAC, cos =1, 85C 30x10 3 PE014/PE015 C (CO) 5A, 250VAC, cos =1, 85C 100x10 3 PE014 A (NO) 5A, 30VDC, 0ms, 85C 100x10 3 PE015 A (NO) 1,5A, 30VDC, 900/h, 50% DF 100x10 3 PE034 A (NO) 6A, 250VAC, cos =1, 70C 50x10 UL 508 3 PE013 C (CO) 5A, 240VAC, resistive, 85C 30x10 3 PE014/PE015 C (CO) 5A, 250VAC, resistive, 85C 100x10 3 PE014 A (NO) 5A, 30VDC, resistive, 85C 100x10 3 PE034 A (NO) 6A, 250VAC, resistive, 70C 100x10 3 PE514 C (CO) 5A, 250VAC, resistive, 85C 10x10 All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. Insulation Data Initial dielectric strength between open contacts 1000V rms between contact and coil 4000V rms Initial insulation resistance 9 open contact circuit >10x10 9 coil-contact circuit >10x10 Clearance/creepage between contact and coil 3.2/4mm Material group of insulation parts IIIa 1 09-2019, Rev. 0919 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Miniature PCB Relay PE (Continued) Tracking index of relay base PTI250V PCB layout / terminal assignment Bottom view on solder pins Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 1 form C (CO) version refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire according EN60335, par.30 Ambient temperature -40 to 85C Category of environmental protection, IEC 61810 RTII - flux proof RTIII - wash tight Vibration resistance (functional), form A/form B >15/5g Shock resistance (destructive) >100g S0176-BA Shock resistance (functional/ 11ms), formA/form B >15/5g Terminal type PCB-THT Weight 5g Resistance to soldering heat THT IEC 60068-2-20 260C/10s (flux proof version) S0176-BB IEC 60068-2-20 260C/5s (wash tight version) Packaging/unit tube/25 pcs., box/500 pcs. 1 form A (NO) version Dimensions S0271-AA S0176-BC S0176-BD Product code structure Typical product code PE 0 1 4 012 Type PE Miniature PCB Relay PE Version 0 Flux proof 5 Wash tight Contact arrangement 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 3 AgSnO 5 AgNi 90/10 gold plated 2 Coil Coil code: please refer to coil versions table Product code Version Contacts Contact material Coil Part number PE013012 flux proof 1 form C AgSnO2 12VDC 7-1415539-4 PE014005 1 CO contact AgNi 90/10 5VDC 1393219-3 PE014006 6VDC 1393219-4 PE014012 12VDC 1393219-6 PE014024 24VDC 1-1393219-0 PE014048 48VDC 1-1393219-3 PE015012 AgNi 90/10 12VDC 1-1393219-4 PE015024 gold plated 24VDC 1-1393219-5 PE034005 1 form A AgNi 90/10 5VDC 4-1415535-6 PE034006 1 NO contact 6VDC 4-1415535-7 PE034012 12VDC 4-1415535-9 PE034024 24VDC 5-1415535-1 PE034048 48VDC 5-1415535-2 PE514012 wash tight 1 form C AgNi90/10 12VDC 2-1393219-0 PE514024 1CO contact 24VDC 2-1393219-2 AgNi90/10 PE515005 5VDC 7-1415542-8 gold plated 2 09-2019, Rev. 0919 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company