416XA203P TE Connectivity

Economy Trimmers Type 416 Series Key Features Stable High Resolution Cermet Element Space-Saving Device 0.2 Watt Rating at 70C Wide Value Range Available Taped for Auto Insertion Dust and Splash Proof Top or Side Adjustment Auto Adjust Head Available Widely Available via Distribution This tiny 6mm square cermet trimmer is offered with alternative adjustment covers for screwdriver and automatic setting and can be supplied in bulk or taped in ammo pack. The 416 can be adjusted from the top or side and is an inexpensive solution to high reliability potentiometer requirements. This series is used to replace some of the larger, expensive, sealed types in high volume circuits. Characteristics - Electrical Resistance Range: 100R to 1M Resistance Values: 1, 2, 5 in each decade Resistance Tolerance: 25%, (20% by selection) End Resistance: 1% Nominal or 10 ohms maximum, whichever is greater. Wiper Current: 50mA Power Rating: 0.2W at 70C Derating to zero at 100C Limiting Element Voltage: 100V DC or AC RMS maximum Rotational Noise (CRV): 3% maximum Temperature Coefficient: 250ppm/C Characteristics - Mechanical End Stop: 50 mNm minimum Starting Torque: 30 mNm maximum Mechanical Adjustment: 240 nominal Operational Life: 100 turns Characteristics - Environmental Temperature Range: - 25C to + 100C Load Life at 70C: R < 5% after 1000 hours Sealing: Dust Proof Climatic Category: 25/100/21 1773119 CIS BI 11/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. Values in brackets Specifications subject are standard equivalents. to change.Economy Trimmers Type 416 Series Dimensions 416P 416X 416M How to Order 416 P A 104 M Common Part Adjustment Style / Adjustment Head Resistance Value Tolerance Configuration A - Cross Slot The first two digits are P - 25% significant figures of 416 - P - Top Adjust R - Auto Adjust resistance value and the (M - 20% 6mm Low Cost Trimmer 2.5mm x 5.0mm third denotes the number by selection only) X - Skeleton of zeros following. M - Top Adjust 5.0mm x 5.0mm e.g. 100R: 101 1K0: 102 X - Side Adjust 10K: 103 2.5mm x 5.0mm 100K: 104 Please state top or side adjustments on all orders TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili- ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.