SCD 44A022X SPECIFICATION CONTROL DRAWING Title Date Revision TWO CONDUCTOR CABLE, UNSHIELDED, UNJACKETED, 11-3-15 C GENERAL PURPOSE, 1000 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 44. COMPONENT WIRES - 44A021X CABLE CONSTRUCTION DETAILS OUTSIDE DIAMETER CONDUCTOR MAXIMUM PART NUMBER (inch) SIZE WEIGHT 1/ (AWG) (lbs/1000 ft.) NOMINAL MAXIMUM 44A022X-26-* 26 .080 .085 3.2 44A022X-24-* 24 .092 .097 4.8 44A022X-22-* 22 .108 .114 7.0 44A022X-20-* 20 .124 .130 10.4 44A022X-18-* 18 .146 .152 15.4 44A022X-16-* 16 .162 .169 19.6 44A022X-14-* 14 .196 .203 29.6 44A022X-12-* 12 .234 .242 44.4 44A022X-10-* 10 .292 .302 71.7 44A022X-8-* 8 .412 .433 125. 44A022X-6-* 6 .508 .533 190. 44A022X-4-* 4 .616 .647 302. CABLE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150C 1/ PART NUMBER: Maximum continuous conductor temperature The in the part numbers above shall be replaced with a VOLTAGE RATING: 1000 volts (rms) at sea level conductor material designator as follows: DIELECTRIC WITHSTAND: 1 tin-coated copper 3000 volts (rms), 60 Hz, 1 minute 2 silver-coated copper INSULATION FLAWS: 3 nickel-coated copper Spark Test, 4.0 kV (rms) at 3 kHz 4 silver-coated high-strength copper alloy (AWG 26-20 only) Impulse Dielectric Test, 8.0 kV (peak) The in the part numbers above shall be replaced by color code designators with a slash separating the component wire colors. Example: AWG 20, tin-coated copper conductors black and brown component wires: 44A0221-20-0/1 NOTE: Nominal values are for information only. Nominal values are not requirements. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER, AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: 901/902.. MAY BE REPLACED BYAxx.) OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL Page 1 of 1 Redwood City, CA 94063-3800 Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 2015 Tyco Electronics Corporation. All rights reserved.