RW-2500/1 Revision 4 Page 1 of 6 September 2014 Specification RW-2500/1 TE 108-121004 HIGH TEMPERATURE HEAT SHRINK IDENTIFICATION MARKER SLEEVES - HTMS (HTTMS) Approved Signatories: This document is electronically reviewed and approved by TE Connectivity. TE CONNECTIVITY, SWINDON, UK While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled. RW-2500/1 Revision 4 Page 2 of 6 September 2014 1. REVISION HISTORY Revision Description of change Date Incorporated By Number 1 AFC 256 14/04/04 Alan Kean 2 AFC 403 13/02/06 John Swift Gordon White and 3 AFC 421 17/07/06 Steve Rowland 4 Refer to PCN 24/09/14 Lee Smith 2. SCOPE This specification sheet, when used with RW-2500, defines the product characteristics and performance of TE Connectivity High Temperature Heat Shrink Identification Marker Sleeves. The IBM daisy wheel printer and ink cartridge developed for HTMS is now obsolete. TE can only guarantee the performance properties covered in this standard, and not any marking applied using non-recommended printing systems. Where non-standard systems are used, customers are required to carry out their own validation testing. This system is not recommended where strain relief properties are required. Product is available in 2:1 shrink ratio. Unless specified, the tube size for qualification testing is 6.4mm (1/4 inch). 3. REQUIREMENTS 3.1. MATERIAL The sleeving shall be fabricated from irradiated, thermally stabilized, modified polyvinylidene fluoride compound. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles, seams, cracks or inclusions. 3.2. COLOR The sleeves shall be supplied in white, unless otherwise specified. 3.3. PROPERTIES The sleeves shall meet the requirements of Table 3. 3.4. FORM The sleeves shall be cut lengths in accordance with Table 1. TE CONNECTIVITY, SWINDON, UK While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled.