General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85C (DC coil) n WG version: product in accordance to IEC 60335-1 n Reflow version: for THR (Through-Hole Reflow) soldering process Typical applications F0144-C Boiler control, timers, garage door control, POS automation, interface modules Zb EN60947-5-1 Approvals RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018 RT314 A (NO) 250/3A, AC-15 6.050 CQC 18002197247 EN60730-1 Technical data of approved types on request 3 RT314 DC-coil A (NO) 12(2)A, 250VAC, 85C 100x10 1) For reflow solderable versions: actual contact performance may be influenced by the Contact Data 12A 16A reflow soldering process. Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Contact Data (continued) Rated current 12A 16A Mechanical endurance 6 Limiting continuous current 12A 16A, UL: 20A DC coil >30x10 operations 6 Limiting making current AC coil >10x10 operations 6 max. 4s, duty factor 10% 25A 30A AC coil, reflow version >5x10 operations Breaking capacity max. 3000VA 4000VA Contact material AgNi 90/10, AgNi 90/10 gold plated Frequency of operation, with/without load Coil Data -1 DC coil 360/72000h Coil voltage range, DC coil/ AC coil 5 to 110VDC / 24 to 230VAC -1 AC coil 360/36000h Operative range, IEC 61810 2 Operate/release time max., DC coil 8/6ms Coil insulation system according UL class F Bounce time max., DC coil, form A/form B 4/6ms 1) Electrical endurance see electrical endurance graph Coil versions, DC coil Coil Rated Operate Release Coil Rated coil Contact ratings code voltage voltage voltage resistance power Type Contact Load Cycles 2) VDC VDC VDC 10% mW IEC 61810 3 005 5 3.5 0.5 62 403 RT314 DC-coil A (NO) 16A, 250VAC, cos=1, 85C 30x10 3 006 6 4.2 0.6 90 400 RT314 DC-coil C (CO) 16A, 250VAC, cos=1, 85C 10x10 3 009 9 6.3 0.9 200 400 RT314 DC-coil A (NO) 10A, 400VAC, cos=1, 85C 150x10 3 012 12 8.4 1.2 360 400 RT114 DC-coil A (NO) 12A, 250VAC, cos=1, 85C 50x10 3 018 18 12.6 1.8 770 420 RT114 AC-coil A (NO) 12A, 250VAC, cos=1, 70C 100x10 020 20 14.0 2.0 952 420 UL 508 3 024 24 16.8 2.4 1440 400 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85C 6x10 3 048 48 33.6 4.8 5520 417 RT334 A (NO) 16A, 250VAC, gen. purpose, 85C 50x10 3 2) 060 60 42.0 6.0 8570 420 RT314 A (NO) 1hp, 240VAC, 40C 1x10 3 2) 110 110 77.0 11.0 28800 420 RT314 A (NO) FLA/LRA, 4.5/13.1A, 480VAC, 70C 100x10 2) Coil resistance 12%. EN60947-4-1 All figures are given for coil without pre-energization, at ambient temperature +23C. RT314 A (NO) 250V/2A, AC-3 6.050 Other coil voltages on request. Coil versions, AC coil 50/60 Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 3) VAC VAC VAC 15% VA 3) 524 24 18.0 3.6 350 0.76 548 48 36.0 7.2 1420 0.74 615 115 86.3 17.3 8100 0.76 620 120 90.0 18.0 8800 0.75 700 200 150.0 30.0 24350 0.76 730 230 172.5 34.5 32500 0.74 3) Coil resistance 10%. All figures are given for coil without pre-energization, at ambient temperature +23C, 50 Hz. 1 11-2020, Rev. 1120 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g Other Data (continued) Terminal type standard version PCB-THT, plug-in reflow version PCB-THR Mounting distance AC coil: 2.5mm Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270C/10s RTIII 260C/5s Resistance to soldering heat THR 4) Other coil voltages on request. reflow soldering (for reflow version) forced gas convection or 5) vapour phase temperature profile according EN61730 Insulation Data Packaging/unit tube/20 pcs., box/500 pcs. Initial dielectric strength 4) infrared heating not allowed between open contacts 1000V rms 5) recommended fluid LS/230 between contact and coil 5000V rms Clearance/creepage between contact and coil 10/10mm Accessories Material group of insulation parts IIIa For details see datasheet Accessories Industrial Power Relay R T Tracking index of relay base PTI 250V NOTE: indicated contact ratings and electrical endurance data for direct reflow version PTI 175V wiring of relays (according IEC 61810-1) for relays mounted on sockets deratings may apply. Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire WG version or Reflow version according EN60335, par30 Ambient temperature DC coil -40 to 85C AC coil -40 to 70C Category of environmental protection, IEC 61810 standard version R TII - flux proof, RTIII - wash tight reflow version RTII - flux proof Vibration resistance (functional) PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. Bottom view on solder pins 12A, pinning 3.5 mm 12A, pinning 5 mm 16A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact S0163-BG S0163-BC S0163-BE 1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact S0163-BH S0163-BD S0163-BF 2 11-2020, Rev. 1120 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company