Signal Relays AXICOM Card SN Relay V23030 n Low profile, therefore particularly suited for flat pack components grouping n For relays with 1 or 2 form C (CO) contacts: - creepage and clearance distances between contacts and frame >5mm or >10mm (depending on the relay version) - dielectric strength between contacts and frame 4kV or 6kV rms rms Typical applications measuring and control systems, alarm and security equipment, road traffic and railway signaling systems Contact Data A104 A106 A204 A206 Contact Data (continued) 8 Contact arrangement 4 form C, 6 form C, 4 form C, 6 form C, Mechanical endurance aaprox. 10 operations (4 CO) (6 CO) (4 CO) (6 CO) 1) The current of 3 A for max 4s at 10% on-time. 2) Gold F on request only Max. switching voltage 250VDC 250VDC 30VDC 30VDC 3) Self inductance in accordance with IEC 255-0-20 250VAC 250VAC 36VAC 36VAC Limiting continuous current 50C ambient 2A 2A 2A 2A Coil Data 75C ambient 1A 1A 1A 1A Magnetic system neutral, monostable Limiting making/breaking current Coil voltage range 5 to 60VDC 1) 1) 3A 3A 0.2A 0.2A Max. coil temperature 110C 2) 2) Contact material Ag, Ag, Gold F Gold F Thermal resistance 35K/W Au-flashed Au-flashed Contact style bifurcated contacts Coil versions, monostable Frequency of operation, without load max. 30 operations/s Coil Rated Operate Limiting Coil Rated coil Operate / release time approx. 8/2ms code voltage voltage Voltage resistance power Max. DC breaking capacity (contacts Ag, gold flashed) 4/6 pole 4) Curve 1: arc extinguished within contact transit period (limit curve I) VDC VDC VDC 10% mW Curve 2: safe breaking, erc extinguished (limit curve II) 032 5 3.3/4.0 10.8 38 658 012 6 3.9/4.6 12.4 50 720 017 12 7.8/9.5 24.0 185 778 021 24 15.5/18.5 47.0 730 789 4) 026 48 32/37 88.0 2700 853 4) 014 60 38/45 109.0 4100 878 4) Coil resistance 15% All figures are given for coil without pre-energization, at ambient temperature +23C The operating voltage limits U and U depend on temperature according to I II the following formula: U = k *U 20C, U = k *U 20C t = ambient temperature, I tamb I I II tu II II amb U = minimum voltage at ambient temperature, I tamb U = maximum voltage at ambient temperature, k and k are factors. II tamb I II t 20C 30C 40C 50C 60C 70C amb k 1 1.04 1.085 1.13 1.17 1.21 I k 1 0.93 0.86 0.79 0.7 0.6 II Insulation Data Initial dielectric strength between coil and frame 500V rms Electrical endurance between contact and contact 1000V rms Type Load Operations between contact and frame 1000V rms 6 Ag, gold-flashed 2.4A, 24VDC, resistive appr. 1x10 between contact and coil 1000V rms 6 Ag, gold-flashed 3A, 24VDC, resistive appr. 0.3x10 6 Ag, gold-flashed 1.35A, 30VDC, resistive appr. 6x10 7 Ag, gold-flashed 0.85A, 40VDC, resistive appr. 2x10 7 Ag, gold-flashed 0.36A, 60VDC, resistive appr. 8x10 7 Ag, gold-flashed 0.21A, 110VDC, rersitive appr. 10x10 6 Ag, gold-flashed 2.4A, 24VDC, resistive+100H3) appr. 1x10 6 Ag, gold-flashed 0.6A, 60VDC, resistive+100H3) appr. 10x10 6 Ag, gold-flashed 0.24A, 110VDC, resistive+100H3) 40x10 1 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company Signal Relays AXICOM Card SN Relay V23030 (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70C Category of environmental protection IEC 61810 RT I - dust protected, RT III - immersion cleanable Degree of protection, IEC 60529 IP30, IP67 Terminal type PCB-THT Weight V23030-Axxx approx. 12g V23030-Cxxx approx. 30g V23030-Hxxx approx. 25g V23030-Jxxx approx. 30g Ultrasonic cleaning not recommended Packaging unit 5 pcs. PCB layout / terminal assignment Bottom view on solder pins 4 form C (4 CO) contacts 6 form C (6 CO) contacts V23030-Axxxx-xx04 V23030-Axxxx-xx04 V23030-Hxxxx-xx04 V23030-Hxxxx-xx04 Hole M required only for relays with earth connection. Hole M required only for relays with earth connection. 2 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company