RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors Full range of Hex Crimp and O Crimp Products for common coaxial cables. Low VSWR Single crimp connectors offer one crimping operation for fast application Twist-on connectors require no special tooling for application to the cable Field serviceable (Category A) connectors qualified to MIL-C-39012 Field replaceable (Category C) plugs with captivated The Tyco Electronics BNC nectors feature numerous Tyco Electronics can also center contact RF connector family with styles including cable plugs supply low cost alternatives Field replaceable plugs can bayonet locking coupling and jacks, adapters and with an extensive commer- be terminated with industry provides highly reliable, printed circuit board con- cial type product line. A standard tooling quick connect/disconnect nectors. In addition to a lower cost consumer series Tarnish resistant Nickel coaxial connections. variety of crimp type termi- product offers the capability finish available Exclusive single and nations, connectors are fur- to supply center contacts in O crimp terminations allow nished in field replaceable strip form and allow for auto- Choice of different dielectrics positive insulation grip and twist-on styles. These mated center contact crimp Listed under the Component and require no soldering, connectors accept a wide technology. All connectors Program of Underwriters providing terminations at range of coaxial cables and are designed around the Laboratories Inc., a very low overall applied are intermateable with mil-specifications, but utilize R File No. E81956 cost. industry standard connec- low-cost materials, offering tors designed to MIL-C- comparable mechanical PC Board soldered Available in both 50 and 75 39012 specifications. and electrical performance. connectors are recognized ohm versions, these con- under the Component Program of Underwriters Laboratories Inc., R File No. E81956 Related Product Data Certified by Canadian Product Specifications 108-12002 BNC Commercial Performance Specifications Standards R T Adapter Page 45 108-1275 BNC Ohm Terminators Association 108-12095 BNC Commercial 75 Material Specifications Page 46 108-12020 BNC O Crimp File No. LR 7189 Ohm Connectors Connectors Tooling Pages 266-268 108-12096 BNC Commercial Feed- 108-12044 BNC Commercial Hex Military Category All MIL type Thru and Bulkhead Crimp O crimp connectors are Category B Type Adapters (Tyco Electronics Crimp Tooling), unless 108-12047 BNC Commercial and 108-12079 BNC Commercial 50 otherwise noted. Hex Crimp Connectors Ohm Solder Jacks Between Series Adapters Packaging All MIL Type connectors 108-12074 BNC Solder Jacks 108-12103 BNC Commercial PCB are packaged individually, all O crimp For BNC Between Series Adapters, see 108-12075 BNC Connectors Press Fit Jacks connectors are bulk packaged and all Hex pages 251-260. (Category A) crimp connectors are individually pack- Application Specifications 108-12078 BNC Commercial PCB aged unless otherwise noted. 114-12001 BNC Commercial PCB Panel-Mount Jacks Jack Press Fit 44 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications Commercial Commercial Single Category B Straight Right-Angle Commercial PC Commercial O Crimp O Crimp Characteristics Crimp O Crimp Solder Solder Board Solder & Hex Crimp & Hex Crimp (MIL Type) (MIL Type) Clamp Clamp 50 & 75 Ohms 50 Ohm Jacks 50 Ohms 75 Ohms Electrical Impedance, Nom. 50 50 50 50 50 75 50 & 75 50 & 75 (Ohms) Working Voltage 500 500 500 500 500 500 500 500 (Volts RMS) Contact Resistance Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 2.0 Inner: 6/1.5 Inner: 2.75 (Milliohms) Outer: 0.3 Outer: 0.2 Outer: .20 Outer: .20 Outer: 1.0 Outer: 2.0 Outer: 3/0.2 Outer: 1.0 Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 5000 (Megohms) Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500 1500 Voltage (VAC) Corona Level at 70,000 ft. 375 375 375 375 375 375 375 (Volts, RMS) RF Leakage, Max. -55 at -55 at -55 at -55 at -55 at (dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz RF Insertion Loss, 0.2 at 0.2 at 0.3 at 0.2 at 0.15 at Max. (dB) 3 GHz 3 GHz 3 GHz 3 GHz 2 GHz Frequency Range 0-4 and 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 (GHz) 0-2 VSWR in Frequency 1.35 1.30 1.30 1.35 1.30 1.30 Range Max. Mechanical Force to Engage (lbs. N )/couple, 13.3/11.12 13.3/11.12 13.3/.028 13.3/.028 26.7/26.69 26.7/26.69 (in-lbs. N-M ) max. 3/2.5 3/2.5 3/2.5 3/2.5 6/6.0 6/6.0 Coupling Nut Retention, 444.8 444.8 444.8 444.8 266.9 266.9 Min. N lbs. 100 100 100 100 60 60 Cable Retention, 266.9 60 266.9 60 177.9 40 177.9 40 266.9 60 266.9 60 266.9 60 N lbs. (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (PCB Ret) Durability (Cycles) 500 500 500 500 500 500 500 500 3 4 Jam Nut Mounting Torque, 25 25 25 25 25 25 /12 25 Max. Nm (in. lbs.) 2.8 2.8 2.8 2.8 2.8 2.8/1.4 2.8 Environmental 1 Temperature Range, -65 to +165 -65 to +85 -65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165 2 Operating (C) -55 to +85 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204 Method 201A Cond. B Cond. B Cond. B Cond. B Cond. III Cond. B Cond. B MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213 Cond. G, 50 Gs Cond. G, 50 Gs Cond. G Cond. G Cond. G, 100 Gs Cond. I, 100 Gs Cond. I or A, 50 Gs Cond. I, 100 Gs MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 Thermal Shock Method 1003 Method 107 Method 107 Method 107 Method 107 Method 107 Method 107 Method 107 Cond. A MIL-STD-1344 Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 Method 1002 Resistance Method 106 Method 106 Method 106 Method 106 Method 106 Method 106 Method 106 Type II MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101 Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Product 108-12044 108-12002 108-12020 108-12095 108-12078 108-12079 Specification 108-12047 1 Assembled to cable with polytetrafluorethylene dielectric. 2 Assembled to cable with polyethylene dielectric. 3 For Metal Threads 4 For Polyester Threads 45 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208