55/0114 SPECIFICATION CONTROL DRAWING Date Revision TITLE WIRE, RADIATION-CR0SSLINKED, MODIFIED ETFE INSULATED, E 2-28-05 LIGHTWEIGHT, OUTER SPACE, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55/. JACKET - LOW OUTGASSING, CONDUCTOR - SILVER-COATED HIGH STRENGTH COPPER ALLOY RADIATION-CROSSLINKED, MODIFIED ETFE TABLE I. CONSTRUCTION DETAILS FINISHED WIRE DIAMETER OF STRANDED WIRE CONDUCTOR MAXIMUM MAXIMUM PART NUMBER CONDUCTOR RESISTANCE SIZE STRANDING DIAMETER WEIGHT (in.) 1/ (AWG) (number x AWG) AT 20C (in.) (lb/1000 ft) (ohms /1000 ft.) MINIMUM MAXIMUM 55/0114-30-* 30 7 x 38 .011 .012 117.4 .024 .002 .66 7 x 36 55/0114-28-* 28 .014 .016 74.4 .027 .002 .91 26 19 x 38 .018 .020 44.8 .032 .002 1.4 55/0114-26-* 55/0114-24-* 24 19 x 36 .023 .025 28.4 .037 .002 2.0 19 x 34 .043 .002 55/0114-22-* 22 .029 .031 17.5 2.9 20 19 x 32 .037 .039 10.7 .050 .002 4.4 55/0114-20-* 55/0114-18-* 18 19 x 30 .046 .050 6.8 .060 .002 6.5 16 19 x 29 .052 .057 5.3 .068 .002 8.3 55/0114-16-* TABLE II. PERFORMANCE DETAILS BEND TESTING WEIGHT MANDREL DIAMETER (lb) ( 3%) (inch) ( 3%) PART NUMBER 1/ CROSSLINK VERIFICATION CROSSLINK VERIFICATION .125 55/0114-30-* .250 55/0114-28-* .125 .250 55/0114-26-* .375 .125 .250 55/0114-24-* .375 55/0114-22-* .500 .375 .500 55/0114-20-* .500 55/0114-18-* .500 .500 55/0114-16-* .750 .750 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C RADIATION RESISTANCE: 500 megarads Maximum continuous conductor temperature SHRINKAGE: 230 3C for 1 hour, 0.125 in. (maximum) in 12 in. VOLTAGE RATING: 600 volts (rms) at sea level VACUUM STABILITY: CROSSLINK VERIFICATION: 300 3C for 1 hour Total Mass Loss (TML), 1.0% (maximum) COLOR: White preferred Volitale Condensable Material, 0.1% (maximum) IDENTIFICATION AND COLOR STRIPING DURABILITY: VOLTAGE WITHSTAND TEST (Post Environmental): 125 cycles (250 strokes) (minimum), 500 g weight 2500 volts (rms), 60 Hz, 5 minutes INSULATION ELONGATION: 50% (minimum) INSULATION FLAWS: PART NUMBER: Spark Test, 3.0 kV (rms) The in the part numbers above shall be replaced by color Impulse Dielectric Test, 8.0 kV (peak) code designators. INSULATION THICKNESS: .005 in. (minimum) 1/ Example: AWG 20, white: 55/0114-20-9 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL R Wire & Cable REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. 501 Oakside Avenue Redwood City, CA 94063-3800 DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. Phone: 1-800-227-8816 Page 1 of 1 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. ReviewX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Hook-up Wire category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : M81044/12-22-6 M81044/9-8-9 CV5509-000 743094-001 81044/12-18-9CS3209 8538-009-1000 BFWUL3239-24-PINK 22759/34-16- 9CS2621 22759/42-24-9CS2620 933205-000 284711-000 961473-000 99M0111-20-2 A00594-000 190571-000 22759/41-12-9CS2620 22759/41-16-9CS2620 22759/43-10-9CS2873 265925-000 CM9524-000 31510-010-250 31514-009-500 34430-010-250 M81044/9-4-9 391441-BK007 400R0111-10-9 431660-000 ATFC0311-20-0 ATFC0311-20-3 44/7024-26-9-9 44A0112-22-9CS3184 456157-000 55/0312- 26-6L-CS2570 31514-010-4000 55A0811-12-9 55A6087-20-9-9-9 55A6315-22-9-9CS2632 55A7400-22-9/96-9CS2275 55A9002-30-5 55PC0211-20-5CS2502 55PC0811-6-9CS2637 55PC1211-22-9-9CS3278 C07683-000 32820-009-5000 34020-008-2000 34406-010-1000 358838-000 391850-BK199 392075-RD199 W28-6HU