55A0113-22-9 TE Connectivity

55A0113 SPECIFICATION CONTROL DRAWING Date Revision TITLE WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, 10-26-04 Q NICKEL-COATED COPPER, LIGHTWEIGHT This specification sheet forms a part of the latest issue of Raychem Specification 55A. INSULATON - RADIATION-CROSSLINKED, CONDUCTOR - NICKEL-COATED COPPER MODIFIED ETFE TABLE I. CONSTRUCTION DETAILS FINISHED WIRE DIAMETER OF STRANDED MAXIMUM WIRE CONDUCTOR MAXIMUM CONDUCTOR RESISTANCE PART NUMBER DIAMETER SIZE STRANDING WEIGHT (in.) AT 20C (in.) 1/ (number x AWG) (AWG) (lbs/1000 ft.) (ohms/1000 ft.) MINIMUM MAXIMUM 55A0113-30-* 30 7 x 38 .011 .013 110.7 .024 .002 .66 55A0113-28-* 28 7 x 36 .014 .016 67.9 .027 .002 .91 .032 .002 55A0113-26-* 26 19 x 38 .018 .020 42.2 1.4 55A0113-24-* 24 19 x 36 .023 .025 25.9 .037 .002 2.0 55A0113-22-* 22 19 x 34 .029 .031 16.0 .043 .002 2.8 .050 .002 55A0113-20-* 20 19 x 32 .037 .039 9.77 4.3 55A0113-18-* 18 19 x 30 .046 .049 6.10 .060 .002 6.5 55A0113-16-* 16 19 x 29 .052 .055 4.76 .068 .002 8.3 .085 .003 55A0113-14-* 14 19 x 27 .065 .069 3.00 13.0 55A0113-12-* 12 37 x 28 .084 .089 1.98 .103 .003 19.7 55A0113-10-* 10 37 x 26 .106 .113 1.24 .128 .006 32.2 .188 .008 55A0113- 8-* 8 133 x 29 .158 .173 .694 56.5 TABLE II. PERFORMANCE DETAILS BEND TESTING WEIGHT MANDREL DIAMETER (lb) ( 3%) (inch) ( 3%) PART NUMBER IMMERSION, IMMERSION, 1/ COLD COLD LIFE CYCLE AND LIFE CYCLE AND BEND BEND ACCELERATED AGING ACCELERATED AGING 55A0113-30-* .250 .375 .125 .500 55A0113-28-* .250 .375 .125 .500 55A0113-26-* .375 .500 .125 .500 55A0113-24-* .375 .500 .250 1.00 55A0113-22-* .500 .750 .375 1.00 55A0113-20-* .500 .750 .500 1.00 55A0113-18-* .500 1.00 .500 1.00 55A0113-16-* .750 1.00 .750 1.00 55A0113-14-* 1.00 1.50 1.00 3.00 55A0113-12-* 1.50 2.00 1.50 3.00 55A0113-10-* 2.00 3.00 1.50 3.00 55A0113- 8-* 3.00 4.00 4.00 6.00 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL R Wire & Cable REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. 501 Oakside Avenue Redwood City, CA 94063-3800 DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. Phone: 1-800-227-8816 Page 1 of 2 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.Revision SCD Number Page 2 of 2 SPECIFICATION CONTROL DRAWING Q 55A0113 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C, Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level ACCELERATED AGING (CROSSLINKING PROOF): 300 3C for 7 hours BLOCKING: 230 3C for 24 hours COLOR: white preferred CONCENTRICITY: 70% (minimum) FLAMMABILITY: Procedure 1, 3 seconds (maximum) 3 in. (maximum) no flaming of facial tissue HUMIDITY RESISTANCE: Insulation Resistance, 5000 megohms for 1000 ft. (minimum) for AWG 30 - 10 3000 megohms for 1000 ft. (minimum) for AWG 8 IDENTIFICATION, COLOR STRIPING AND BAND DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight IMMERSION: Diameter increase 5% (maximum) no cracking, no dielectric breakdown INSULATION ELONGATION AND TENSILE STRENGTH: Elongation, 75% (minimum) Tensile strength, 5000 lbf/in (minimum) INSULATION FLAWS: Spark test, 5.7 kV (rms) at 3 kHz Impulse Dielectric Test, 8.0 kV (peak) INSULATION RESISTANCE: 5000 megohms for 1000 ft. (minimum) for AWG 30 - 10 3000 megohms for 1000 ft. (minimum) for AWG 8 INSULATION THICKNESS: 0.005 in. (minimum) LIFE CYCLE: 230 3C for 500 hours LOW TEMPERATURE-COLD BEND: -65 3C for 4 hours SHRINKAGE: 230 3C, for 6 hours, 0.125 in. (maximum) in 12 in. SMOKE TEST: 250 5C. No visible smoke SURFACE RESISTANCE: 500 megohms-in. (minimum), both readings THERMAL SHOCK RESISTANCE: 200 3C, 0.060 in. (maximum) VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms), 60 Hz WRAP TEST: 313 3C for 2 hours PART NUMBER: The in the part numbers on page 1 shall be replaced by a color code designator. 1/ Example:AWG 22, white: 55A0113-22-9 AWG 22, white with black stripe: 55A0113-22-90 1/ See footer section on page 1