SCD 55PC0112 SPECIFICATION CONTROL DRAWING Date Revision Title WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, LIGHTWEIGHT, GENERAL PURPOSE, 600 VOLT 5-14-15 F This specification sheet forms a part of the latest issue of Raychem Specification 55PC. CONDUCTOR - SILVER-COATED COPPER INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE CONSTRUCTION DETAILS FINISHED WIRE CONDUCTOR DIAMETER WIRE CONDUCTOR DIAMETER WEIGHT (inch) MAXIMUM PART NUMBER SIZE STRANDING (inch) (lbs/1000 ft.) RESISTANCE 1/ (AWG) (number x AWG) AT 20C LOWER TARGET UPPER LOWER TARGET UPPER TARGET UPPER (ohms/1000 ft.) SPEC LIMIT VALUE SPEC LIMIT SPEC LIMIT VALUE SPEC LIMIT VALUE SPEC LIMIT 55PC0112-26-* 26 19 x 38 .0175 .0183 .0191 38.4 .0291 .0305 .0319 1.23 1.34 55PC0112-24-* 24 19 x 36 .0225 .0233 .0241 24.3 .0341 .0355 .0369 1.81 1.93 55PC0112-22-* 22 19 x 34 .0285 .0293 .0301 15.1 .0401 .0415 .0429 2.69 2.83 55PC0112-20-* 20 19 x 32 .0365 .0375 .0385 9.19 .0481 .0495 .0509 4.11 4.27 55PC0112-18-* 18 19 x 30 .0452 .0464 .0476 5.79 .0573 .0590 .0607 6.27 6.56 55PC0112-16-* 16 19 x 29 .0514 .0527 .0538 4.52 .0646 .0665 .0684 8.01 8.33 55PC0112-14-* 14 19 x 27 .0644 .0659 .0674 2.88 .0789 .0810 .0831 12.39 12.81 55PC0112-12-* 12 37 x 28 .0825 .0845 .0865 1.90 .0974 .1000 .1026 19.17 19.71 55PC0112-10-* 10 37 x 26 .1050 .1070 .1090 1.19 .1220 .1260 .1300 30.68 31.70 55PC0112-8-* 8 133 x 29 .158 .163 .169 .658 .183 .188 .193 57.7 59.9 55PC0112-6-* 6 133 x 27 .198 .205 .212 .418 .225 .234 .243 89.1 94.1 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue Page 1 of 2 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. Redwood City, CA 94063-3800 Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 2008-2015 Tyco Electronics Corporation. All rights reserved. Page Revision SCD SPECIFICATION CONTROL DRAWING 2 of 2 F 55PC0112 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level COLOR: White preferred CROSSLINKED VERIFICATION: 300 3C for 1 hour IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) 2 Tensile Strength, 5000 lbf/in (minimum) INSULATION FLAWS: Spark Test, 3.0 kV (rms) Impulse Dielectric Test, 8.0 kV (peak) INSULATION THICKNESS: 0.006 in. (nominal) SHRINKAGE: 230 3C for 1 hour, 0.125 inch (maximum) in 12 inches VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms) 1/ PART NUMBER: The in the part numbers on page 1 shall be replaced by a color code designator. Example: AWG 22, white: 55PC0112-22-9 AWG 22, white with a black stripe: 55PC0112-22-90 1/ See footer section on page 1