562A011-25-0 Cable Transitions & Breakouts, Y Shape, 5 Branches , 25, 25, Adhesive Purchased Separately Adhesive Requirement 562A011-25-0 ACTIVE Raychem TE Internal : 820058-000 Cable Transitions & Breakouts, Y Shape, 5 Branches , 25, 25, Adhesive Purchased Separately Adhesive Requirement View on TE.com> Wire Protection & Management > Heat Shrink Molded Shapes > Cable Transitions & Breakouts Molded Part Shape: Y Shape Number of Branches & Legs: 5 Material Code: 25 Material Systems Code: 25 Adhesive Requirement: Adhesive Purchased Separately Features Product Type Features Molded Part Shape Y Shape Size Code 011 Configuration Features Number of Branches & Legs 5 Adhesive Requirement Adhesive Purchased Separately Body Features Material Fluid Resistant Modified Elastomer Material Code 25 Material Systems Code 25 Dimensions Inside Diameter Range (Leg 2) 3.5 6.6 mm .14 .26 in Inside Diameter Range (Leg 3) 3.5 6.6 mm .14 .26 in Inside Diameter Range (Body) 6.9 13.2 mm .27 .52 in Inside Diameter Range (Leg 1) 3.5 6.6 mm .14 .26 in Inside Diameter Range (Leg 4) 3.5 6.6 mm .14 .26 in Usage Conditions Operating Temperature Range -75 150 C -103 302 F Operation/Application Power Cable Accessory No 08/19/2021 10:13PM Page1 For support call+1 800 522 6752 562A011-25-0 Cable Transitions & Breakouts, Y Shape, 5 Branches , 25, 25, Adhesive Purchased Separately Adhesive Requirement Power Cable Accessory No Industry Standards Government Qualified No Other Adhesive Code S1125 Molded Part Shape Code 562A Fluid & Chemical Resistance Long-Term Exposure at High Temperature Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2021 (211) Candidate List Declared Against: JAN 2021 (211) Does not contain REACH SVHC Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on requirements for substances in articles posted at this URL: