Instruction Sheet
AdapterKitsforGREENERDManual
408--9027
FrameAssemblies3Aand3B 18 Mar 11 RevC
GREENERD Manual
Frame Assembly
Counterbalance Kit 58176--1
(Counterbalance, 2 Screws,
and 2 Nuts)
Ram Adapter Assembly Kit 58177--1 or --2
(Ram Adapter, Magnet, Dowel Pin, and
14-- or16--in. Push Block)
Board Support Plate Kit 58175--1
(Board Support Plate, Nut,
Screw, and Washer)
Figure 1
1. INTRODUCTION 3. INSTALLATION
Refer to Figure 1, and install the adapter kits as
Counterbalance Kit 58176--1, Ram Adapter Assembly
follows:
Kit 58177--1 or 58177--2, and Board Support Plate Kit
58175--1 are designed to be installed onto
1. Install the counterbalance onto the handle of the
GREENERD Manual Frame Assemblies 3A and 3B.
frame assembly. Secure with the hardware.
These kits are used to adapt the frame assembly for
seating connectors with ACTION PIN* contacts onto 2. Install the board support plate onto the base
plate of the frame assembly. Insert the screw
a (pc) printed circuit board.
through the hole from the top of the plate. Secure
Read these instructions thoroughly before using the
with the hardware.
kits.
The board support plate can be installed in one of
NOTE
three positions. Choose the position that best
Dimensions in this instruction sheet are in
NOTE
supports the size of the pc board being used.
millimeters [with inches in brackets]. Figures are
i
not drawn to scale.
i
3. Insert the push block from the ram adapter
assembly kit onto the ram adapter, making sure
Reasons for reissue of this instruction sheet are
that the magnet in the ram adapter holds the push
providedinSection5, REVISION SUMMARY.
block. Install the ram adapter onto the ram of the
frame assembly. Insert the dowel pin through the
2. DESCRIPTION
hole in the ram adapter.
When properly assembled onto the frame assembly,
4. REPLACEMENTANDREPAIR
the counterbalance kit balances the handle and ram,
the board support plate kit supports the pc board
Customer--replaceable parts are listed in Figure 2.
during connector seating, and the ram adapter
assembly kit prevents damage to the connector A complete inventory should be stocked and
during seating. controlled to prevent lost time when replacement of
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
1 of 2
All Rights Reserved PRODUCT INFORMATION 1--800--522--6752 For latest revision and Regional Customer Service,
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.
LOCB
*Trademark. Other logos, product and/or Company names may be trademarks of their respective owners.408-9027
parts is necessary. Parts other than those listed 5. REVISIONSUMMARY
should be replaced by TE to ensure quality and
Revisions to this instruction sheet include:
reliability. Order replacement parts through your
representative, or call 1--800--526--5142, or send a
S Updated document to corporate requirements
facsimile of your purchase order to 717--986--7605, or
write to:
CUSTOMER SERVICE (038--035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
For customer repair service, call 1--800--526--5136.
Counterbalance Kit Board Support Plate Kit Ram Adapter Assembly Kit
127+1.52
8
457+1.52 [18+.060] 9.53
[5+.060]
[.375]
9
12
(Inside)
162+1.52
[6.38+.060]
4
11
457+1.52
5
10
[18+.060]
6
1 2 3
7
21.8 [.86]
REPLACEMENTPARTS
ITEM PARTNUMBER DESCRIPTION QTYPERKIT
5
1 1--21018--5 NUT,Hex, / --18 2
16
5
2 2--21001--2 SCREW, Socket Head Cap, / --181.50 L 2
16
3 312750--1 COUNTERBALANCE 2
5
4 1--21018--5 NUT,Hex, / --18 1
16
5
5 5--21003--1 SCREW, Socket Head Cap, / --181.75 L 1
16
5
6 21055--9 WASHER, Flat, / 1
16
7 312749--1 PLATE, Board Support 1
8 3--21000--4 SCREW, Socket Head Cap, 10--32.38 L 1
9 20908--1 MAGNET, 1.38 D1.19 L 1
10 6--21030--8 PIN,Dowel,.50D2.25 L 1
312751--1 PUSH BLOCK, 25.4102 [14] (Included with Kit 58177--1) 1
1111
312751--2 PUSH BLOCK, 25.4152 [16] (Included with Kit 58177--2) 1
12 312752--1 ADAPTER, Ram 1
Figure 2
2 of 2 RevC