6-1393116-3 TE Connectivity

General Purpose Panel/Plug-in Relays PPottotter & Brumfielder & Brumfield KUMP Series Panel Plug-in Relay n 15 amp rating n Contact arrangements 1-3 form A, 1-3 form B, 1-3 form C, 1 form X, 1 form Y, 1 form Z n Open or enclosed n Plain or bracket mount dust covers n Optional indicator lamp and push-to-test button n Several termination and mounting styles Typical applications Hospital beds, semiconductor wafer equipment, boom/bucket lifts. Coil versions, AC coil Approvals Coil Rated Operate Coil Rated coil UL E22575 CSA LR15734 Technical data of approved types on request. code voltage voltage resistance power VAC VAC 15% VA 6 6 5.1 4.2 2.8 Contact Data 12 12 10.2 18 2.8 Contact arrangement 1, 2 and 3 form A (NO) 1, 2 and 3 form B (NC) 24 24 20.4 72 2.8 1, 2 and 3 form C (CO) 1 form X (NO-DM) 120 120 102.0 1700 2.9 1 form Y (NC-DB) 1 form Z (CO-DB-DM) 240 240 204.0 7200 2.9 Rated voltage 277VAC All figures are given for coil without preenergization, at ambient temperature +23C. Rated current 15A Contact material AgCdO AgSnOInO Min. recommended contact load 300mA, 12VDC 300mA, 12VDC Insulation Data Frequency of operation 360 ops./hour 360 ops./hour Initial dielectric strength Operate/releases time max. 15/10ms between open contacts 1200V Bounce time max. 17ms rms between contact and coil 2200V rms between adjacent contacts 2200V rms Contact ratings Initial insulation resistance Type Load Cycles between insulated elements 100M, 500VDC UL 508 AgCdO Other Data 15A, 277VAC Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 1/2HP, 120VAC refer to the Product Compliance Support Center at 10A, 240VAC www.te.com/customersupport/rohssupportcenter 10A, 32VDC Ambient temperature 5FLA, 15LRA, 250VAC DC coil Enclosed relays: -45C to 70C 5A, 120VAC, tungsten Open relays: 15C higher maximum 0.5A, 250VAC AC coil Enclosed relays, 3 pole: -45C to +45C 0.5A, 125VDC Enclosed relays, 1 and 2 pole: -45C to +55C 10FLA, 40LRA, 125VAC Open relays: 15C higher maximum 3A, 600VAC Category of environmental protection 1/2HP, 480VAC IEC 61810 RT0 - open relay RTI - dust protected 1/2HP, 600VAC Terminal type Quick connects (QC), .187, .205 or .250: 1HP, 480VAC, 3 phase PCB-THT AgSnOInO 3 Terminal retention, push force 15A, 277VAC, pf = 0.8 15x10 3 QC .205 17 lbs for 3s 10A, 277VAC, pf = 0.8 100x10 6 QC .187, QC .250, PCB 25 lbs for 3s Mechanical endurance 10x10 ops. Weight 85g Packaging/unit tray/25 pcs., box/150pcs. Coil Data Coil voltage range 5 to 110VDC Accessories 6 to 240VAC For details see datasheet Sockets and Accessories, KUP Relays Coil insulation system according UL Class B Coil versions, DC coil Product Code Description Coil Rated Operate Coil Rated coil 27E893 DIN socket (use 20C318 clip) code voltage voltage resistance power 27E121 Track mount socket (use 20C314 clips) VDC VDC 10% W 27E043 Chassis mount/solder eyelet socket (use 20C254 clip) 5 5 3.75 21 1.2 27E046 Chassis mount/PCB socket (use 20C254 clip) 6 6 4.5 32.1 1.125 27E067 Chassis mount/quick connect socket (use 20C254 clip) 12 12 9.0 120 1.2 27E396 Snap-in/quick connect socket (use 20C254 clip) 24 24 18.0 472 1.25 48 48 36.0 1800 1.3 110 110 82.5 10000 1.25 All figures are given for coil without preenergization, at ambient temperature +23C. 1 03-2015, Rev. 0315 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Panel/Plug-in Relays Potter & Brumfield KUMP Series Panel Plug-in Relay (Continued) Dimensions Seated Heights For KUM (open) Relays KUM bracket type 1.391 (35.33mm) for 6-32 stud with .218 (5.54mm) locating tab. 2.43 MAX.* 1.437 (61.72) .19 (36.50) 2.33 MAX.** (4.8) X X (59.18) 1.52 (38.6mm) for bracket 2.29 MAX.*** (58.17) with 2- 6 32 tapped holes63 .63 X (16.0) (16.0) 2.27 MAX.* 1.282 (32.56mm) for 6-32 tapped core (57.7) 2.171 MAX.** with .125 (3.18mm) or .218 (5.54mm) locating tab. (2) 6-32 THREAD .16 (55.14) (4.1) TAPPED HOLES 2.125 MAX.*** (53.98) 2.046 (51.97mm) for relay KUM stud type with printed circuit terminals. 1.468 MAX. (37.29) . 2.27 MAX.* .031 REF031 REF (57.7) (.79) (.79) STUD TYPE also available with .125 (3.18mm) 1 2 3 2.171 MAX.** (55.14) 4 5 6 tab, as well as without stud and locating tab. 2.125 MAX.*** 1.282 MAX. 1.391 7 8 9 (53.98) (35.56) Models without stud have core tapped 6-32 (35.33) .218 1.687 MAX109 MAX. AB (42.85) (5.54) THREAD, .25 (6.4mm) minimum depth. (2.77) .31 1.39 MAX.* (7.9) .065 (35.3) *Dimensions with .250 (6.35mm) terminals150 (1.65) .437 1.29 MAX.** 6-32 TAB WIDTH (32.8) (11.10) THREAD ** Dimensions with .110 (2.79mm) or .205(5.21mm) terminals. (3.81) 1.25 MAX.*** (31.8) *** Dimensions with .187 (4.75mm) terminals. KUMP plain case KUMP core / stud mount case .288 .187 (4.75) DIA. 1.968 MAX. X (49.99) (7.32) PUSH-TO-TEST BUTTON 1.906 MAX. AVAILABLE (48.41) 1.531 MAX219 MAX. 1.43 MAX. (38.89) .130 (36.27) (5.56) 1.968 MAX. (3.30) 1 2 3 1.74 MAX. (49.99) 4 5 6 (44.2) 1.906 MAX. 1.406 MAX. 7 8 9 (48.41) (35.71) X STUD with A B 6-32 THREAD .312 1.39 MAX.* or CORE TAPPED (7.92) 6-32 (35.3) X 1.29 MAX.** X .437 .010 (32.8) (11.10 .25) X 1.25 MAX.*** (31.8) X Is For Terminal Dimensions. See Teminal Drawings. KUMP top flange case 1.518 MAX078 TYP. (38.56) (1.98) Dimensions with .250 (6.35mm) terminals. 1 2 3 1.713 .003 Dimensions with .187 (4.75mm and .205 5.21mm) terminals. 4 5 6 (43.51 .08) 7 8 9 1.373 .010 1.989 .003 *Dimensions with .250 (6.35mm) terminals. (34.87 .25) (50.52) AB ** Dimensions with .110 (2.79mm) or .205(5.21mm) terminals. *** Dimensions with .187 (4.75mm) terminals. 2.248 MAX178 TYP. (57.10) (4.52) KUMP bracket mount case KUMP stud on end case .312 2.90 MAX. 1.968 MAX078 R. TYP625 TYP. PUSH-TO-TEST BUTTON TYP38 (73.7) (49.99) (1.98) (15.88) AVAILABLE (7.92) X (9.7) 1.906 MAX. (48.41) .085 MAX75 (2.16) (19.1) 1.531 MAX. (38.89) .06 (1.52) X X 1.968 MAX375 (49.99) (9.53) .437 6-32 THREAD .07 2.500 1.906 MAX. (11.10) .16 (1.8) (63.50) (48.41) (4.1) 2 03-2015, Rev. 0315 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.