InstructionSheet
408--8452
7000Series4-PoleTimingRelay 14MAR 11 RevA
1. INTRODUCTION
Model 7024
This instruction sheet covers the installation and
L1 L2
operation of the AGASTAT* 7000 Series 4--Pole
1 2
Timing Relays (Models 7014 and 7024). Read these
instructions thoroughly before installing the relay.
TD
Dimensions in this instruction sheet are in
NOTE
5 3 4 6
on
millimeters [with inches in brackets]. Figures are
Drop--
not drawn to scale. Out
8
7
2. DESCRIPTION (Figure1)
Each relay is a precise timing instrument which
11 9 10 12
balances pneumatic, electrical, and mechanical forces
using a minimum of moving parts. When satisfactory
Delay Setting
performance cannot be restored, the unit should be
returned to TE Connectivity for repair.
Energized
Coil
De--Energized
Contacts Open
N.C. (1--5)(2--6)
Closed
N.O. (3--5)(4--6)
Open
Closed
4--Pole Timing Relay
(Typ)
Open
Contacts
N.C. (7--11)(8--12)
Closed
N.O. (9--11)(10--12) Open
Model 7014
Closed
L2
L1
2
1
LINEARTIMINGRANGES
TIMERANGE
MODEL7014D MODEL7024
TD CODE
3
5 4 6
on
Pick--
A 0.2to2Seconds 0.1to1Second
Up
8
7 B 0.7to7Seconds 0.5to5Seconds
C 2to20Seconds 1.5to15Seconds
11 10 12
9 D 10to100Seconds 5to50Seconds
E 30to300Seconds 20to200Seconds
Delay Setting
F 1.5to15Minutes 1to10Minutes
Energized
Coil
H 3to30Minutes 3to30Minutes
De--Energized
N.C. (3--5)(4--6) Closed
I Not Available 6to60Minutes
Open
Contacts
J Not Available 3to120Cycles
Closed
K Not Available 1to300Cycles
N.O. (1--5)(2--6) Open
D Model 7014is availablewithletter calibrateddials only. Theupper
N.C. (9--11)(10--12)
Closed
endof thetimeranges inthis model may betwicethevalues shown.
Open
Contacts
Closed
N.O. (7--11)(8--12)
Open
Figure 1 (contd)
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
1 of 2
All Rights Reserved PRODUCT INFORMATION 1--800--522--6752 For latest revision and Regional Customer Service,
TE logo is a trademark. visit our website at www.te.com
LOCB
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.408-8452
3. MOUNTINGINSTRUCTIONS (Figure2)
ACCOILUNITS DCCOILUNITS
Normal mounting of the relay is in a vertical position,
RATED RATED
CODE CODE RATED
from the back of the panel. Four No. 8--32 tapped
VOLTAGE VOLTAGE
LETTER LETTER VOLTAGE
holes are provided in the back plate.
AT 60 Hz AT 50 Hz
A 120 110 M 28
Mounting screws should not project more than
CAUTION
3.63 mm [5/32 in.] into the back of the unit, to
B 240 220 N 48
prevent internal damage.
C 480 -- O 24
A bracket and required screws are supplied with each
D 550 -- P 120
unit for mounting the unit from the front. The bracket
extends approximately 9.52 mm [3/8 in.] from each
E 24 -- Q 12
side of the unit.
F -- 127 R 60
Horizontal operation is not recommended.
NOTE
G -- 240 S 250
H 12 -- T 550
Models 7014 and 7024 (Mounting Dimensions)
I 6 -- U 16
82.5 [3.25]
J 208 -- V 32
73.2 [2.88]
W 96
44.4
9.6 [.38]
DualVoltageCoil
K Y 6
[1.75]
((CCoommbbiinneessAA aannddBB))
5.1 [.199] Dia
Z 220
Mtg Holes
12.7
AC Specials L1, L2, etc. DC Specials X1, X2, etc.
[.50]
Operational voltagerange90% to120% for AC units: 85% to120%
for DC units.
All units draw approximately 8watts power at ratedvoltage.
38.1
Minimumoperatingvoltages arebasedonvertically mountedModel [1.50]
7014(on--delay) units.
147.8
8--32Mtg
[5.82]
AC units dropout at approximately 50% of ratedvoltage. DC units
Holes (4)
dropout at approximately 40% of ratedvoltage.
Max.
19.0
76.2
All units may beoperatedonintermittent duty cycleatvoltages 10%
[.75]
63.5
above the listed maximums. (Intermittent duty -- maximum50% duty
[3.00]
[2.50]
cycleand30minutes ontime.)
Coils arerated6Vac through550Vac.
CONTACTRATINGS
65.3
(ContactCapacityinAmperes -- ResistiveLoads)
[2.57]
Max.
CONTACT MINIMUM100,000 MINIMUM1,000,000
VOLTAGE OPERATIONS OPERATIONS
84.3
30Vdc 15.0 7.0
[3.32]
Max.
110 Vdc 1.0 0.5
120Vac60Hz 20.0 15.0
240Vac60Hz 20.0 15.0
480Vac60Hz 12.0 10.0
Figure 2
Inductiveandcapacitiveloads shouldnot haveinrushcurrents that
4. QUALIFICATIONS
exceed five times normal operatingload.
Contact ratings arelistedunder theUnderwriters Laboratories Inc.
The 7000 Series Timing Relays are Listed by
Component RecognitionProgramfor 100,000operations:
Underwriters Laboratories Inc. (UL) in File E15631.
10A Resistive, 240Vac (per pole)
and Certified to CSA International in File LR29186.
1/4Horsepower, 120Vac/240Vac (per pole)
15A, 30Vdc (per pole)
5A, General Purpose, 600Vac
Total loadmust not exceedtwicetheabovelistings per polerating.
5. REVISIONSUMMARY
Continuous duty ratingis 25amperes any voltage, any load.
S Updated document to corporate requirements
Figure 1 (end) S New logo
2 of 2 Rev A