FSP-11.5A-6 Wire-to-Board Jumpers & Shunts, Flat Flexible Strip Jumper, Wire-to-Board, 6 Position, 1.27 mm .05 in Centerline, 1 Row, Length 1.5 in 38.1 mm FSP-11.5A-6 ACTIVE TE Internal : 6-1437161-1 Wire-to-Board Jumpers & Shunts, Flat Flexible Strip Jumper, Wire- to-Board, 6 Position, 1.27 mm .05 in Centerline, 1 Row, Length 1.5 in 38.1 mm View on TE.com> Connectors > PCB Connectors > Wire-to-Board Connectors > Wire-to-Board Jumpers & Shunts PCB Jumper & Shunt Assembly Type: Flat Flexible Strip Jumper Connector System: Wire-to-Board Number of Positions: 6 Centerline (Pitch): 1.27 mm .05 in Number of Rows: 1 Features Product Type Features Compatible With Discrete Wire Type Solid PCB Jumper & Shunt Assembly Type Flat Flexible Strip Jumper Connector System Wire-to-Board Connector & Contact Terminates To Printed Circuit Board Configuration Features Number of Conductors 6 Number of Positions 6 Number of Rows 1 Electrical Characteristics Impedance 98 Operating Voltage 200 VAC Body Features Flexible Strip Jumper Insulation Material Polyester Contact Features Pin Arrangement (Left) A Pin Arrangement (Right) A Contact Current Rating (Max) 2 A Housing Features Centerline (Pitch) 1.27 mm .05 in 01/19/2022 06:21AM Page1 For support call+1 800 522 6752 FSP-11.5A-6 Wire-to-Board Jumpers & Shunts, Flat Flexible Strip Jumper, Wire-to-Board, 6 Position, 1.27 mm .05 in Centerline, 1 Row, Length 1.5 in 38.1 mm Centerline (Pitch) 1.27 mm .05 in Dimensions Wire Size .08 mm Product Length 38.1 mm 1.5 in Usage Conditions Operating Temperature Range -40 105 C -40 221 F Operation/Application Circuit Application Power & Signal Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUL 2021 (219) Candidate List Declared Against: JUL 2017 (174) SVHC > Threshold: Not Yet Reviewed Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA Guidance on requirements for substances in articles (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts 01/19/2022 06:21AM Page2 For support call+1 800 522 6752