Signal Relays
AXICOM
IM Relay
2
n
Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm
n
Switching current 2/5A, switching power 60W/62.5VA and
switching voltage 220VDC/250VAC
n
Low coil power consumption,
140mW standard, 100mW for high sensitive version, 50mW for ultra
high sensitive version and 100mW for bistable version
n
High dielectric and surge capability up to 2500Vrms between open
contacts and 2500Vrms between coil and contacts
n
High mechanical shock resistance up to 50g functional
Typical applications
Telecommunication, access and transmission equipment, optical network
terminals, modems, office and business equipment, consumer electronics,
108-98001 Rev. M
AXICOMSignalRelays
measurement and test equipment, industrial control, medical equipment,
U
IM Relay
HVAC
Approvals Contact Data (continued)
Contact Data
UL 508 File No. E 111441 Electrical endurance
Technical data of approved types on request at contact application 0
IM-A IM-B IM-C IM-D IM-E
6
(30mV/10mA) min. 2.5x10 operations
Number of contacts and type
1Polebreak 1Polemake 1Pole 2Polebreak 2Polemake
6
Contact Data standard, C D, I P changeover cable load open end min. 2.0x10 operations
5
Contact assembly
Bifurcatedcontacts
standard and high high contact resistive, 125VDC / 0.24A - 30W min. 5x10 operations
5
Contact material
Palladium-ruthenium,gold-covered
high dielectric current stability resistive, 220 VDC / 0.27A - 60W min. 1x10 operations
5
Limiting continuous current
2A2A 4A2A 2A
version version version resistive, 250VAC / 0.25A - 62.5VA min. 1x10 operations
at max. ambient temperature
5
Contact arrangement 2 form C, 2 CO resistive, 30VDC / 1A - 30W min. 5x10 operations
Maximum switching current
2A 2A 3A 2A 2A
5
Max. switching voltage 220VDC, 220VDC, 220VDC, resistive, 30VDC / 2A - 60W min. 1x10 operations
Maximum swichting voltage
220Vdc
250VAC 250VAC 250VAC UL contact rating 30VDC, 2A, 60W, NO only
250Vac
Maximum switching capacity
Rated current 2A 5A 2A 60W,62.5 VA 110VDC, 0.3A, 33W
Thermoelectric potential
Limiting continuous current 2A 5A 2A <10 V 220VDC, 0.27A, 60W
Minimum switching voltage
100V
Switching power 60W, 62.5VA 125VAC, 0.5A, 62.5W
108-98001 Rev. M
AXICOMSignalRelays
Initial contact resistance /
< 100 m < 100 m NO < 100 m < 50 m < 50 m
Contact material PdRu AgNi PdRu 250VAC, 0.25A, 62.5W
measuring condition: 10 mA / 20 mV
8
+Au +Au +Au Mechanical endurance IM Rela10 y operations
Electrical CC0 Contact category 0
endurance ( 30 mV / 10 mAcover) ed covered covered 6
min.2.5x10operations
cable load open end
6
min.2.0x10operations
Contact style twin cont. twin cont. twin cont.
I: single contacts Coil Data
Resistive load at 125 Vdc / 0.24 A - 30 W Coil Operating Range
5
min.5x10operations
at 220 Vdc / 0.27 A - 60 W 5
Minimum switching voltage 100V min.1x10operationsMagnetic system monostable, bistable
at 250 Vac / 0.25 A - 62.5
5
min.1x10operations
Initial contact resistance <50m at 10mA/30mV Coil voltage range 1.5 to 24VDC
VA 5
min.5x10operations
U = Nominal coil voltage
nom
at 30 Vdc / 1 A - 30 W I: < 100m 3.4
5 50mW coil
min.1x10operations
at 30 Vdc / 2 A - 60 W 3.2 100mW coil U = Upper limit of the operative range of
max.
Thermoelectric potential <10V Coil versions, standard version, monostable, 1 coil
3
Mechanical endurance 8
typ.10 operations the coil voltage (limiting voltage) when
Umax. at 2x1A
Operate time typ. 1ms, max. 3ms Coil Rated Operate Release Coil Rated coil
2.8 Umax. at 0A
UL contact ratings 220 Vdc / 0.24 A - 60 W
coils are continously energized
2.6
Release time code voltage voltage voltage resistance power
125 Vdc / 0.24 A - 30 W
2.4
Umax. at 0A
U = Lower limit of the operative range of
250 Vac / 0.25 A - 62.5 VA op. min.
without diode in parallel typ. 1ms, max. 3ms VDC VDC VDC 10% mW
2.2
125 Vac / 0.5 A - 62.5 VA
the coil voltage (reliable operate voltage)
2
with diode in parallel typ. 3ms, max. 5ms 00 1.5 1.13 0.15 16 140
30 Vdc / 2 A - 60 W
1.8
For latching relays Uset min. resp.
Bounce time max. typ. 1ms, max. 5ms 08 2.4 1.80 0.24 41 140
Umax. at 2x2A
1.6
Ureset min.
01 3 2.25 0.30 64 140
1.4
Max. DC Load Breaking Capacity
1.2
U = Lower limit of the operative range of
02 4.5Unom. nominal coil voltage3.38 0.45 145 140rel. min .
1
the coil voltage (reliable release voltage)
Max. DC load breaking capacity 03 5 3.75 0.50 178 140
0.8
Uop min.
0.6
04 6 4.50 0.60 257 140
0.4
05 9 6.75 0.90 579 140
Urel. min.
0.2
06 12 9.00 1.20 1029 140
0
-50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 100110 120
07 24 18.00 2.40 2880 200
Ambient Temperature [C]
All figures are given for coil without pre-energization, at ambient temperature +23C
resistive load
Coil operating range, standard version
3.4
3.2
140mW coil
3
200mW coil
2.8
Umax. at 2x1A
2.6
2.4
Umax. at 0A
2.2
Umax. at 0A
2
1.8
1.6
DC current [A]
Umax. at 2x2A
1.4
1.2
Unom. nominal coil voltage
1
0.8
All specications subject to change. Consult Tyco Electronics for latest specications. 21 of 28
0.6
0.4
Urel. min.
0.2
0
-50 -40 -30 -20 -10 0102030405060708090 100 110 120
Ambient Temperature [C]
1
09-2017, Rev. 0917 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section,3.4 available at are subject to change.
3.2
a TE Connectivity Ltd. company 108-98001 Rev. M
AXICOMSignalRelays
108-98001 Rev. M
AXICOMSignalRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Signal Relays
AXICOM
Dimensions Dimensions in mm
Dimensions Dimensions in mm
IM Relay (Continued)
IMTHT IMTHT IMSMT IMSMT
IMTHT IMTHT IMSMT IMSMT
Standard Narrow GullWings J-Legs
Standard Narrow GullWings J-Legs
mm inch mm inch mm inch mm inch
Coil Data (continued) Insulation Data standard* C* D,P, I
mm inch mm inch mm inch mm inch
L 10.000.08 0.3930.003 10.000.08 0.3930.003 10.000.08 0.3930.003 10.000.08 0.3930.003
Coil versions, sensitive version, monostable, 1 coil standard, high high current,
L 10.000.08W 6.000.080.3930.0030.2360.00310.000.085.700.300.3930.0030.2240.01210.000.086.000.080.3930.0030.2360.00310.000.086.000.080.3930.0030.2360.003
Coil Rated Operate Release Coil Rated coil sensitive, dielectric high contact
W 6.000.08 0.2360.003 5.700.30 0.2240.012 6.000.08 0.2360.003 6.000.08 0.2360.003
H 5.650.20 0.2220.008 5.800.08 0.2300.003 5.650.20 0.2220.008 5.650.02 0.2220.008
code voltage voltage voltage resistance power ultra high version stability
H 5.650.20 0.2220.008 5.800.08 0.2300.003 5.650.20 0.2220.008 5.650.02 0.2220.008
T 3.2 0.125 3.2 0.125 N/A N/A N/A N/A
VDC VDC VDC 10% mW sensitive version
T 3.2 0.125 3.2 0.125 N/A N/A N/A N/A
T1 N/A N/A N/A N/A 7.500.30 0.2950.011 2.800.20 0.1100.007
11 3 2.40 0.30 91 100 version
T1 N/A N/A N/A N/A 7.500.30 0.2950.011 2.800.20 0.1100.007
T2 5.080.10 0.2000.004 3.200.10 0.1260.004 5.080.10 0.2000.004 5.080.10 0.2000.004
12 4.5 3.60 0.45 194 100 Initial dielectric strength
T2 5.080.10D1 3.200.150.2000.0040.1260.0063.200.103.200.150.1260.0040.1260.0065.080.103.200.150.2000.0040.1260.0065.080.103.200.150.2000.0040.1260.006
13 5 4.00 0.50 234 100 between open contacts 1000V 1500V 750V
D1 3.200.15 0.1260.006 3.200.15rms rms 0.1260.006rms 3.200.15 0.1260.006 3.200.15 0.1260.006
D2 2.200.15 0.0870.006 2.200.15 0.0870.006 2.200.15 0.0870.006 2.200.15 0.0870.006
16 12 9.60 1.20 1315 110 between contact and coil 1800V 1800V 1500V
D2 2.200.15Tw 0.40 0.0870.006 0.015 2.200.15rms 0.4rms 0.0870.006rms 0.015 2.200.15 0.4 0.0870.006 0.015 2.200.15 0.4 0.0870.006 0.015
17 24 19.20 2.40 4120 140 Tw between adjacent contacts0.40 0.015 1000V 0.4 1800V 0.015750V 0.4 0.015 0.4 0.015
S 0.75 0.029 rms 0.300.05rms rms0.0110.002 N/A N/A N/A N/A
S 0.75 0.029 0.300.05 0.0110.002 N/A N/A N/A N/A
Coil versions, ultra high sensitive version, monostable, 1 coil Initial surge withstand voltage
Coil Rated Operate Release Coil Rated coil between open contacts 1500V 2500V 1000V
108-98001 Rev. M
AXICOMSignalRelays
code voltage voltage voltage resistance power between contact and coilTHT Version 2500V 2500V 2000V SMT Version
THT Version SMT Version
VDC VDC VDC 10% mW between adjacent contacts 1500V 2500V 1000V
IM Relay 108-98001 Rev. M
AXICOMSignalRelays
21 3 3.00 0.30 180 50 Initial insulation resistance
Standard Version
Narrow Version Gull Wings J-Legs
9 9 9
22 4.5 4.50 0.45 405 50 between insulated elements >10 >10 >10
Standard Version Narrow Version Gull Wings J-Legs
IM Relay
23 5 5.00 0.50 500 50 Capacitance
Coil Operating Range
26 12 12.00 1.20 2880 50 between open contacts max. 1pF
All figures are given for coil without pre-energization, at ambient temperature +23C between contact and coil max. 2pF
Coil Operating Range
U = Nominal coil voltage
between adjacent contacts max. 2p
nom
10.00.08 5.70.3 10.00.08 6.00.08
3.4 50mW coil 10.00.08 6.00.08
10.00.08 6.00.08
Coil operating range, sensitive and ultra high sensitive coil3.2 5.70.3 6.00.08
100mW coil U = Upper limit of the operative range of 10.00.08 6.00.08 10.00.08
max. 10.00.08
6.00.08
10.00.08
*this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength
3
U = Nominal coil voltage
nom the coil voltage (limiting voltage) when
Umax. at 2x1A
3.4 50mW coilUmax. at 0A
2.8 enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applica-
coils are continously energized
3.2 U = Upper limit of the operative range of
100mW coil
2.6 max.
tion as recommended per the applicable product specification. It is clarified that the usage
3
2.4 Umax. at 0A
the coil voltage (limiting voltage) when
Umax. at 2x1A U = Lower limit of the operative range of
op. min. of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local
Umax. at 0A
2.8
2.2 0.4 0.4
coils are continously energized 5.080.1
sales or field engineer for further information and detailed material declaration. the coil voltage (reliable operate voltage)
2.6
2 2.80.2
0.4 0.4
0.4 5.080.1
7.50.3
2.4 Umax. at 0A
1.8 0.4
U = Lower limit of the operative range of
op. min. For latching relays Uset min. resp. 2.80.2
Umax. at 2x2A
2.2 0.4 7.50.3
1.6 5.080.1
0.4
the coil voltage (reliable operate voltage)
Ureset min. 3.20.1
2
1.4 5.080.1
5.080.1
3.20.1 Coplanarity 0.1mm
1.8
For latching relays Uset min. resp. Coplanarity 0.1mm
1.2 U = Lower limit of the operative range of5.080.1
Unom. nominal coil voltageUmax. at 2x2A rel. min.
1.6 Coplanarity 0.1mm
1
Coplanarity 0.1mm
RF DataUreset min.
the coil voltage (reliable release voltage) Coplanarity 0.1mm
Coplanarity 0.1mm
1.4
0.8
Uop min.
1.2 Isolation at 100MHz/900MHz 37.0dB/18.8dB Coplanarity 0.1mm Coplanarity 0.1mm
U = Lower limit of the operative range of
0.6 Unom. nominal coil voltage
rel. min.
1
0.4
Insertion loss at 100MHz/900MHz 0.03dB/0.33dB
the coil voltage (reliable release voltage)
0.8 Urel. min.
0.2
Uop min.
Voltage standing wave ratio (VSWR)
0.6
0 Mounting Hole Layout Solder Pad Layout
0.4
-50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 100110 120 at 100MHz/900MHz 1.06/1.49
Mounting Hole Layout Solder Pad Layout
Urel. min.
0.2
Ambient Temperature [C]
View onto the component side of the PCB (top view) View onto the component side of the PCB (top view)
0
-50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 100110 120
View onto the component side of the PCB (top view) View onto the component side of the PCB (top view)
Ambient Temperature [C]
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
3.4 Narrow Version
Standard Version Gull Wings
3.2 140mW coil
Coil versions, standard, bistable 1 coil refer to the Product Compliance Support Center at
Narrow Version Gull Wings
Standard Version
3
200mW coil
Coil Rated Set Reset Coil Rated coil www.te.com/customersupport/rohssupportcenter
3.42.8
Umax. at 2x1A
3.22.6 140mW coil
code voltage voltage voltage resistance power Ambient temperature -40C to +85C
2.43
Umax. at 0A 200mW coil
VDC VDC VDC 10% mW Thermal resistance <150K/W
2.8
2.2
Umax. at 2x1A
Umax. at 0A
2.6
40 1.52 1.13 -1.13 23 100 Category of environmental protection
2.4
1.8 Umax. at 0A
48 2.4 1.80 -1.80 58 100 IEC 61810 RT V - hermetically sealed
2.2
1.6
Umax. at 2x2A Umax. at 0A
2
41 1.43 2.25 -2.25 90 100 Vibration resistance (functional) 20g, 10 to 500Hz
1.81.2
Unom. nominal coil voltage
42 4.5 3.38 -3.38 203 100 Shock resistance (functional), half sinus 11ms 50g
1.61
Umax. at 2x2A
1.40.8
43 5 3.75 -3.75 250 100 Shock resistance (destructive), half sinus 0.5ms 500g
1.2
0.6
Unom. nominal coil voltage
44 6 4.50 -4.50 360 100 Mounting position any
1
0.4
Urel. min.
0.8
45 0.29 6.75 -6.75 810 100 Weight max. 0.75g
min.0.75 min.0.75
0.6
0
min.0.75
46 12 9.00 -9.00 1440 100 Resistance to soldering heat SMTmin.0.75
0.4
-50 -40 -30 -20 -10 0102030405060708090 100 110 120
Urel. min.
47 0.224 18.00 -18.00 2880 200 IEC 60068-2-58
Ambient Temperature [C]
0
All figures are given for coil without pre-energization, at ambient temperature +23C
Moisture sensitive level, JEDEC J-Std-020D MSL3
-50 -40 -30 -20 -10 0102030405060708090 100 110 120
related only to SMT relays
Ambient Temperature [C]
Terminal Assignment
Coil operating range, bistable 1 coil packed in orginal dry-packs
Terminal Assignment
3.4
3.2
Relay top view
Ultrasonic cleaning not recommended
3
Relay top view
Umax. - 5%coil
3.4 Packaging/unit
2.8
Umax.-5%coil
duty at
3.2
2.6 duty at 0A(100mW)
2x2A (100mW) THT version tube/50pcs., box/1000 pcs.
Umax. - 100% coil duty at
Latching Type, 1 Coil
3
2.4 Non-Latching Type
0A (100mW)
Umax. - 5%coil
SMT version r eel/1000 pcs., box/1000 or 5000 pcs.
2.8
Latching Type, 1 Coil
2.2 duty at UUmaxmax.-5%coil.-5%coil
Non-Latching Type
2.6 2x2A (100mW) duty at 0A(100mW)duty at 0A (200mW)
2 Umax. - 100% coil duty at Monostable version Bistable version, 1 coil
reset condition
2.4 0A (100mW) not energized condition
Umax. - 100% coil duty at
1.8
rest condition reset condition
0A (200mW) reset condition
2.2 Umax.-5%coil not energized condition
1.6
Umax. -5% coil
duty at 0A (200mW)
2
1.4 duty at 2x1A (100mW)
Umax. - 100% coil duty at
1.8
1.2
0A (200mW)
1.6
Umax. -5% coil
1 Unom. nominal coil voltage
duty at 2x1A (100mW)
1.4
0.8
1.2 Uset min.
0.6
1 Unom. nominal coil voltage
0.4
100 mW Latching
0.8
0.2
200 mW Latching
Uset min.
0.6
0
Contacts inreset position. Contact
0.4
-50-40 -30-20 -100 10 20 30 40 50 60 70 80100 mW Latching90 100 110 120 130 140
Contacts inreset position. Contact
0.2
200 mW Latching positionmightchangeduringtrans-
Ambient Temperature [C]
0
positionmightchangeduringtrans-
-50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 100 110 120 130 140 portationandmustberesetbefore
portationandmustberesetbefore
Ambient Temperature [C]
use.
Contacts are shown in reset condition. Contact position might change during use.
transportation and must be reset before use.
All specications subject to change. Consult Tyco Electronics for latest specications. 24 of 28
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 28
2
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 28
09-2017, Rev. 0917 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
All specications subject to change. Consult Tyco Electronics for latest specications. 24 of 28
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company