RF Coax Connectors
BNC Connectors (50 ohm/75 ohm)
Product Facts
Bayonet lock coupling for
quick connect/disconnect
Various connectors available
in 50 and 75 ohm versions
Fully intermateable with
comparable BNC UG/U
connectors
Full range of Hex Crimp
and O Crimp Products for
common coaxial cables.
Low VSWR
Single crimp connectors
offer one crimping operation
for fast application
Twist-on connectors require
no special tooling for
application to the cable
Field serviceable (Category
A) connectors qualified to
MIL-C-39012
Field replaceable (Category
C) plugs with captivated
The Tyco Electronics BNC nectors feature numerous Tyco Electronics can also
center contact
RF connector family with styles including cable plugs supply low cost alternatives
Field replaceable plugs can
bayonet locking coupling and jacks, adapters and with an extensive commer-
be terminated with industry
provides highly reliable, printed circuit board con- cial type product line. A
standard tooling
quick connect/disconnect nectors. In addition to a lower cost consumer series
Tarnish resistant Nickel coaxial connections. variety of crimp type termi- product offers the capability
finish available Exclusive single and nations, connectors are fur- to supply center contacts in
O crimp terminations allow nished in field replaceable strip form and allow for auto-
Choice of different dielectrics
positive insulation grip and twist-on styles. These mated center contact crimp
Listed under the Component
and require no soldering, connectors accept a wide technology. All connectors
Program of Underwriters
providing terminations at range of coaxial cables and are designed around the
Laboratories Inc.,
a very low overall applied are intermateable with mil-specifications, but utilize
R
File No. E81956
cost. industry standard connec- low-cost materials, offering
tors designed to MIL-C- comparable mechanical
PC Board soldered
Available in both 50 and 75
39012 specifications. and electrical performance.
connectors are recognized
ohm versions, these con-
under the Component
Program of Underwriters
Laboratories Inc.,
R
File No. E81956
Related Product Data
Certified by Canadian
Product Specifications 108-12002 BNC Commercial Performance Specifications
Standards
R
T Adapter Page 45
108-1275 BNC Ohm Terminators
Association
108-12095 BNC Commercial 75 Material Specifications Page 46
108-12020 BNC O Crimp
File No. LR 7189
Ohm Connectors
Connectors Tooling Pages 266-268
108-12096 BNC Commercial Feed-
108-12044 BNC Commercial Hex Military Category All MIL type
Thru and Bulkhead
Crimp O crimp connectors are Category B Type
Adapters
(Tyco Electronics Crimp Tooling), unless
108-12047 BNC Commercial and
108-12079 BNC Commercial 50 otherwise noted.
Hex Crimp Connectors
Ohm Solder Jacks
Between Series Adapters Packaging All MIL Type connectors
108-12074 BNC Solder Jacks
108-12103 BNC Commercial PCB are packaged individually, all O crimp
For BNC Between Series Adapters, see
108-12075 BNC Connectors
Press Fit Jacks connectors are bulk packaged and all Hex
pages 251-260.
(Category A)
crimp connectors are individually pack-
Application Specifications
108-12078 BNC Commercial PCB
aged unless otherwise noted.
114-12001 BNC Commercial PCB
Panel-Mount Jacks
Jack Press Fit
44
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications
Commercial Commercial
Single Category B Straight Right-Angle Commercial PC Commercial
O Crimp O Crimp
Characteristics Crimp O Crimp Solder Solder Board Solder
& Hex Crimp & Hex Crimp
(MIL Type) (MIL Type) Clamp Clamp 50 & 75 Ohms 50 Ohm Jacks
50 Ohms 75 Ohms
Electrical
Impedance, Nom.
50 50 50 50 50 75 50 & 75 50 & 75
(Ohms)
Working Voltage
500 500 500 500 500 500 500 500
(Volts RMS)
Contact Resistance Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 2.0 Inner: 6/1.5 Inner: 2.75
(Milliohms) Outer: 0.3 Outer: 0.2 Outer: .20 Outer: .20 Outer: 1.0 Outer: 2.0 Outer: 3/0.2 Outer: 1.0
Initial Insulation Resistance
5000 5000 5000 5000 5000 5000 5000 5000
(Megohms)
Dielectric Withstanding
1500 1500 1500 1500 1500 1500 1500 1500
Voltage (VAC)
Corona Level at 70,000 ft.
375 375 375 375 375 375 375
(Volts, RMS)
RF Leakage, Max. -55 at -55 at -55 at -55 at -55 at
(dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz
RF Insertion Loss, 0.2 at 0.2 at 0.3 at 0.2 at 0.15 at
Max. (dB) 3 GHz 3 GHz 3 GHz 3 GHz 2 GHz
Frequency Range 0-4 and
0-2.5 0-4 0-4 0-4 0-4 0-2 0-4
(GHz) 0-2
VSWR in Frequency
1.35 1.30 1.30 1.35 1.30 1.30
Range Max.
Mechanical
Force to Engage (lbs. [N])/couple, 13.3/11.12 13.3/11.12 13.3/.028 13.3/.028 26.7/26.69 26.7/26.69
(in-lbs. [N-M]) max. [3/2.5] [3/2.5] [3/2.5] [3/2.5] [6/6.0] [6/6.0]
Coupling Nut Retention, 444.8 444.8 444.8 444.8 266.9 266.9
Min. N [lbs.] [100] [100] [100] [100] [60] [60]
Cable Retention, 266.9 [60] 266.9 [60] 177.9 [40] 177.9 [40] 266.9 [60] 266.9 [60] 266.9 [60]
N [lbs.] (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (PCB Ret)
Durability (Cycles) 500 500 500 500 500 500 500 500
3 4
Jam Nut Mounting Torque, 25 25 25 25 25 25 /12 25
Max. [Nm] (in. lbs.) [2.8] [2.8] [2.8] [2.8] [2.8] [2.8/1.4] [2.8]
Environmental
1
Temperature Range, -65 to +165
-65 to +85 -65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165
2
Operating (C) -55 to +85
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202
MIL-STD-202
Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204
Method 201A
Cond. B Cond. B Cond. B Cond. B Cond. III Cond. B Cond. B
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213
Cond. G, 50 Gs Cond. G, 50 Gs Cond. G Cond. G Cond. G, 100 Gs Cond. I, 100 Gs Cond. I or A, 50 Gs Cond. I, 100 Gs
MIL-STD-1344
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202
Thermal Shock Method 1003
Method 107 Method 107 Method 107 Method 107 Method 107 Method 107 Method 107
Cond. A
MIL-STD-1344
Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202
Method 1002
Resistance Method 106 Method 106 Method 106 Method 106 Method 106 Method 106 Method 106
Type II
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101
Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B
Product 108-12044
108-12002 108-12020 108-12095 108-12078 108-12079
Specification 108-12047
1
Assembled to cable with polytetrafluorethylene dielectric.
2
Assembled to cable with polyethylene dielectric.
3
For Metal Threads
4
For Polyester Threads
45
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208