SPECIFICATION CONTROL DRAWING
Product Revision Component Dimensions Cable Dimensions
Product Ident. L1.75 B C H D E F G
Name Code min min min max max min max
(L0.07)
S02-07-R-XX * SIZE2R 16.5 2.65 3.68 8.25 2.65 3.68 1.40 0.72
(0.650) (0.105) (0.140) (0.325) (0.105) (0.140) (0.055) (0.030)
S02-08-R-XX * SIZE3R 16.5 4.30 5.08 8.25 4.30 5.08 2.15 1.25
(0.650) (0.170) (0.200) (0.325) (0.170) (0.200) (0.085) (0.050)
S02-10-R-XX * SIZE5R 19.1 7.00 7.60 8.25 7.00 7.60 4.30 2.50
(0.750) (0.275) (0.300) (0.325) (0.275) (0.300) (0.170) (0.100)
* Consult Raychem for individual product revision. Contains more than 1 part name.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED LEAD: MIL-W-22759/32-22-XX*. (Raychem 55A0111-22-XX*)
*XX: Part name and lead callout shall be replaced with lead color designation per MIL-STD-681.
Colors available: solid and with single stripe.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 105C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.
For compatible insulations, see SAE-AS83519/2 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem
Specification RT-1404 and SAE-AS83519/2.
3. For assembly information, refer to Raychem document RCPS-100-70.
4. Parts shall be marked with identification code per table.
For best results,prepare the cable as shown:
- Strip length of shield: 6.35 8.25 (.250 - .325)
- Use methods (a) or (b) with cable rated for 125C and above. Use method (c) for cables rated for 105C and cable with spiral
wrapped shields.
a) Window Strip b) End Strip c) End Strip with Fold Back
TITLE:
THERMOFIT
SOLDERSLEEVE SHIELD TERMINATION
DEVICES
ENVIRONMENT RESISTANT WITH LEAD
300 Constitution Drive
Menlo Park, CA 94025, USA
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
DOCUMENT NO.: S02-07/-08/-10-R-XX
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend DCR NUMBER: REPLACES:
0.00 N/A this drawing at any time. Users should
D000419 N/A
0.0 N/A ROUGHNESS IN evaluate the suitability of the product for
0 N/A MICRON their application.
DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET:
M. FORONDA 27-Sept-00 SEE TABLE 2 None A 1 of 1
Print Date: 12-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Solder Sleeves & Shield Tubing category:
Click to view products by TE Connectivity manufacturer:
Other Similar products are found below :
D-260-C-A 899170-000 620040N001 620069N003 620263N004 CTA-0050-01 629624-000 6501390002 CX0781-000 CX0782-000
696396-000 697080-000 715325N001 FLX40-030-02-CS8652 908357N001 D-436-38CS2908 CB0213-000 CB0219-000 274384-000
285343-000 970053-000 ST18-2-00 FLX40-020-04-CS8651 317035-000 325534-000 D-100-00-WOTI D-150-1011 395947-000
427243N001 514535-000 C03534-000 CB0220-000 D44133N001 068615-000 626168-000 451893-000 931289-000 162583-000
585769N001 610001N004 620005N003 6200060004 622041N003 626167-000 EG3678-000 650075N002 6500820003 6500850004
650126N010 650127N005