AMP Precision Pin and Socket Contacts Signal Contacts Spring, +.0010 Type III+, Crimp, Snap-In .0625 .0020 Stainless Steel Dia. +0.025 Spring, Stainless Steel 1.588 Pin Body 0.051 Ferrule, Brass, .390 Nickel Flash Min. 9.91 Pin .113 Max. 2.87 Dia. Pin .010 .530 Socket 0.25 13.46 Material and Finish See chart. Application ToolingPage 29 Socket Technical Documents Contact BodyBrass or phosphor bronze 114-10004 Application Specification Retention SpringStainless steel 108-10042 Product Specification Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Contact Size 16Pin Diameter .062 1.57 (Test Current, 13 Ampere) Refer to contact current carrying capability information on page 8. Wire Size Strip Form Loose Piece Tooling Part No.** Ins. Range Contact Contact No. Contact No. Dia. Loose Piece Strip Form Finish 2 Range AWG mm Pin Socket Pin Socket Hand Tool Applicators 2 567867-1*** Gold/Nickel 788085-3 788088-2 .015-.030 30-28 0.05-0.09 90716-1 or 567947-1*** 0.38-0.76 3 Sel. Gold/Nickel 788085-1 788088-1 788085-4 788088-3 or 680602-*** Bright Tin 1-66425-2 1-66424-1 1 .040-.060 2 6 Gold/Nickel 66425-7 66424-7 66429-3 66428-3 91515-1 466598-*** 1.02-1.52 3 30-26 0.05-0.15 Sel. Gold/Nickel 66425-8 66424-8 66429-4 66428-4 2 1 .014-.030 Gold/Nickel 66393-7 66394-7 6 90225-2 466585-3*** 0.36-0.76 3 Sel. Gold/Nickel 66393-8 66394-8 66406-4 66405-4 Bright Tin 1-66106-5 1-66108-5 1-66107-1 1-66109-7 6 91515-1 466321- *** 2 Gold/Nickel 66106-7 66108-7 66107-3 66109-3 1 .035-.055 26-24 0.12-0.2 or or 3 Sel. Gold/Nickel 66106-8 66108-8 66107-4 66109-4 0.89-1.40 58495-1* 466908-2*** 4 Sel. Gold/Nickel 66108-1 66109-1 Bright Tin 2-66102-5 3-66104-0 1-66103-8 1-66105-9 2 6 1 Gold/Nickel 66102-8 66104-8 66103-3 66105-3 91515-1 466323-*** .040-.080 1.02-2.03 66102-9 66104-9 66103-4 66105-4 or or 3 Sel. Gold/Nickel 7 7 2-66102-2 2-66104-3 58495-1* 466907-2*** 4 Sel. Gold/Nickel 66104-1 66105-1 24-20 0.2-0.6 466383-4*** Bright Tin 1-66564-2 1-66563-1 66566-7 66565-7 5 .060-.120 6 91542-1 or 466979-1*** 3 1.52-3.05 Sel. Gold/Nickel 66564-8 66563-8 66566-4 66565-4 or 567363-*** Bright Tin 1-66332-4 1-66331-4 1-66400-0 1-66399-0 6 2 91523-1 466324- *** 1 Gold/Nickel 66332-7 66331-7 66400-3 66399-3 .080-.100 or or 3 Sel. Gold/Nickel 66332-8 66331-8 66400-4 66399-4 2.03-2.54 6 90225-2 466942-1*** 4 Sel. Gold/Nickel 66331-2 66399-2 S 1-66098-9 Bright Tin 1-66100-9 1-66099-5 1-66101-9 6 1-66098-8 91505-1 or 466325- *** 1 .080-.100 2 6 18-16 0.8-1.4 Gold/Nickel 66098-8 66100-8 66099-3 66101-3 91523-1 or or 2.03-2.54 3 58495-1* 466906-1*** Sel. Gold/Nickel 66098-9 66100-9 66099-4 66101-4 4 Sel. Gold/Nickel 66098-6 66099-1 Bright Tin 1-66359-4 1-66358-6 1-66361-2 1-66360-2 1 .080-.100 Phos Bronze 1-66359-5 1-66358-8 1-66359-5 1-66358-8 466326- *** 2 Gold/Nickel 66359-9 66358-9 66361-3 66360-3 2.03-2.54 6 91519-1 or 1-66359-0 1-66358-0 66361-4 66360-4 3 466923-2*** 18-14 0.8-2.0 Sel. Gold/Nickel 1-66359-2 1-66358-3 66361-8 66360-8 4 Sel. Gold/Nickel 66358-1 66360-1 66598-9 5 466958-1*** .110-.150 Bright Tin 66597-8 66602-8 66601-9 6 1-66598-0 91521-1 or 2.79-3.81 3 567364- *** Sel. Gold/Nickel 66597-2 66598-2 66602-2 66601-2 1 5 S Overall insulation crimp diameter, including crimp barrel, must not Contacts can ONLY be used in: Metrimate CPC Series 1 (Arr. 23- Standard reeling of strip form contacts. exceed .125 3.18 . 24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors. *Commercial PRO-CRIMPER II hand tool for field repair only. Note: 2 6 .000015 0.00038 gold in the mating area over .000050 0.00127 To use with the 626 Pneumatic Tool: remove crimping head from Straight Die Set can be adapted for use with 626 Pneumatic Tool System. min. nickel. Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1, Insertion Tool Part No. 91002-1 (for insulation diameters .070 1.78 3 .000030 0.00076 gold in the mating area, with gold flash on remain- Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), or less), No. 200893-2 (for insulation diameters .090 2.29 max.). der, over .000050 0.00127 min. nickel. and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot Extraction Tool Part No. 305183. (Instruction Sheet 408-1216) 4 .000030 0.00076 gold in the mating area, with gold gradient on actuated). **There are power options available for these tools/dies. See Battery 7 remainder, over .000050 0.00127 min. nickel. Phosphor Bronze Powered Crimp tool Kit and SDE Electric Terminator on page 30. ***Call Technical Support for Machine Applicator Part Numbers. Note: All part numbers are RoHS compliant. 9 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.comAMP Precision Pin and Socket Contacts Signal Contacts (Continued) Grounding Pin Type III+, Crimp, Snap-In (make first - break last) Contact Size16 Pin Diameter.062 1.57 Related Product Data Material and Finish Application ToolingPages 29, 30 Contact BodyCopper alloy, plated tin or gold Technical DocumentsPage 4 SpringStainless steel Ins. Strip Form Loose Piece Grounding Pin Part No. Wire Size Range Contact Dia. Applicator Hand Tool** 2 Finish mm AWG 1 Strip Form Loose Piece Range Part No. Part No. 3 Tin 164159-3 164162-1 .035-.055 91515-1 or 0.12-0.2 26-24 0.89-1.4 2 58495-1* Sel. Gold/Nickel 164159-4 164162-2 3 466323- *** 91515-1 or Tin 164160-3 164163-1 .045-.070 3 0.2-0.6 24-20 or 91505-1 or 1.14-1.78 2 Sel. Gold/Nickel 164160-4 164163-2 466907-2*** 58495-1* 3 Tin 164161-3 164164-1 466741- *** 91523-1 or .078-.098 3 0.8-1.4 18-16 or 91505-1 or 1.98-2.49 2 Sel. Gold/Nickel 164161-4 164164-2 680114-3*** 58495-1* 1 Overall insulation crimp diameter, including crimp barrel, must not exceed .125 3.18 . 2 Gold flash over .000030 0.00076 min. nickel on entire contact, with .000030 0.00076 gold in contact area. 3 To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call Technical Support at 800-522-6752), Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuat- ed) or 189722-1 (foot actuated). *Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System. **There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. ***Call Technical Support at 1-800-522-6752 for Automatic Machine Applicator Part Numbers. Extraction Tool Part No. 725840-1 Note: All part numbers are RoHS compliant. Spring, Stainless Steel Type III+, Solder Versions Solder-Type (with Preformed Wire Barrel/Insulation Support) 3.90 Min. 9.91 1.085 +.0010 Max. .0625 27.56 .0020 Dia. .0625+.0254 1.588 .0508 Pin Body, Brass 1.588 Pin .200 Localized Plate Area 5.08 Min. Pin .825 Max. 20.96 Socket Material Contact Body and TabBrass Retention SpringStainless steel .010 .530 0.25 13.46 Finish See chart on Page 11. Socket 10 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com