6EL4C TE Connectivity

Power Inlet Filters & Power Entry Modules Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Dual Conguration Power Entry Module L Series UL Recognized CSA Certied VDE Approved EDL4C / EHL4C EDL1S / EHL1S L Series Specications Power entry module with switch or fuse Maximum leakage current each Line to Ground: DL Models HL Models For 10A capability and high performance ltering @ 120 VAC 60 Hz: .25 mA 2 A see the P Series on page 192 @ 250 VAC 50 Hz: .50 mA 5 A Two element circuit provides extended EMI attenuation similar to EAB inlet lter Hipot rating (one minute): 3 Line to Ground: 2250 VDC North American or metric fuse holders Line to Line: 1450 VDC Available with minimal leakage current for medical applications (HL models) Operating Voltage: 1S & 1SC models (xed): 250 VAC max. Ordering Information 4 & 4C Sux: 100, 120, 220 or 240 VAC. 6 E D L 1 S C M Operating Frequency: 50/60 Hz Fuseholder Type (pre-installed) Rated Current: 2 to 6A M Metric Required Fuse(s): Omit for North American North American: one .25 x 1.25(not included) Metric: two 5 x 20mm (not included) Mounting Type C Snap-In Switch: DPST Omit for ange mount 10,000 operations at 51A max. inrush Switch Option S DPST on/o switch Omit for none Voltage Selection Positions 1 or 4 L Series Filter Type D General Purpose H Medical omit for none Leakage current designation E Low Leakage (<0.5 mA) Current Rating 2, 4 or 6A 175 Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specications subject to change.Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Dual Conguration Power Entry Module (continued) L Series North American Fusing Metric Fusing Available Part Numbers Flange Mount Snap-In Flange Mount Snap-In Single Voltage, 6EL1S 6EL1SC 6EL1SM 6EL1SCM Switched Non-Filtered 4 Voltage Select, 6EL4 6EL4C 6EL4M 6EL4CM No Switch 2EDL1S 2EDL1SC 2EDL1SM 2EDL1SCM Single Voltage, 4EDL1S 4EDL1SC 4EDL1SM 4EDL1SCM Switched 6EDL1S 6EDL1SC 6EDL1SM 6EDL1SCM General Purpose Filter 2EDL4 2EDL4C 2EDL4M 2EDL4CM 4 Voltage Select, 4EDL4 4EDL4C 4EDL4M 4EDL4CM No Switch 6EDL4 6EDL4C 6EDL4M 6EDL4CM Single Voltage, 6EHL1S 6EHL1SC 6EHL1SM 6EHL1SCM Switched Medical Filter 4 Voltage Select, 6EHL4 6EHL4C 6EHL4M 6EHL4CM No Switch Voltage Selection Recommended Panel Cutouts .06 R 1.52 * 2.201 (1) 55.91 (3) (3) 2.213* (2) 56.21 .020 (4) R .508 1.122* *+.008 -.00 28.50 +.203 -.00 1.575 (3) To change selected voltage: disconnect the power 40.00 cord; open cover using a small blade screwdriver or similar tool; insert the tool into the voltage selection slot and remove wheel from unit; select desired voltage; replace wheel into unit and close cover, making sure the selected voltage appears in connector window. 176 Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specications subject to change.