55PC6121 SPECIFICATION CONTROL DRAWING Date Revision TITLE WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, 03-16-00 C TIN-COATED COPPER, GENERAL PURPOSE, LIGHT AIRFRAME, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC. CONDUCTOR - TIN-COATED COPPER INSULATION - RADIATION-CROSSLINKED, 30 MICRO INCH THICKNESS MINIMUM MODIFIED ETFE COLOR - White with 2 black stripes CONSTRUCTION DETAILS FINISHED WIRE CONDUCTOR DIAMETER ( in.) DIAMETER WEIGHT WIRE CONDUCTOR ( in.) ( lbs/1000 ft. ) MAXIMUM UPPER PART NUMBER SIZE STRANDING LOWER RESISTANCE TARGET LOWER LOWER UPPER UPPER (AWG) (number x AWG) SPEC SPEC AT 20C TARGET TARGET VALUE SPEC SPEC SPEC SPEC LIMIT LIMIT (ohms/1000 ft.) VALUE VALUE LIMIT LIMIT LIMIT LIMIT 55PC6121-22-900 22 19 x 34 .0285 .0293 .0301 16.2 .0455 .0472 2.74 2.90 3.06 .0438 55PC6121-20-900 20 19 x 32 .0365 .0375 .0385 9.88 .0523 .0540 .0557 4.19 4.38 4.57 55PC6121-18-900 18 19 x 30 .0452 .0464 .0476 6.23 .0616 .0635 .0654 6.28 6.59 6.90 WIRE RATINGS AND ADDITIONAL REQUIREMENTS SHRINKAGE: 230 3C for 1 hour, 0.125 in.(maximum) in 12 in. TEMPERATURE RATING: 150C Maximum continuous conductor temperature SPOOLING: VOLTAGE RATING: 600 volts (rms) Minimum lengths, 500 ft. CROSSLINK VERIFICATION: 300 3C for 1 hour Place orange flag on each splice IDENTIFICATION AND COLOR STRIPING DURABILITY: STRIPE WIDTH: .022 in. (maximum) STRIPE INTERVALS: Per MIL-STD-681 ( 2 inch maximum) 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION AND TENSILE STRENGTH: VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL): Total Insulation, 2500 volts (rms) Elongation, 50% (minimum) Tensile Strength, 5000 lbf/in (minimum) MARKING: Mark wire in green ink at 1.5 inch (nominal) distance between marks. Example: 18 AWG INSULATION FLAWS: Impulse Dielectric Test, 8.0 kV (peak) Mark shall be read horizontally for AWG size 20 and 18 INSULATION THICKNESS: .008 in. (nominal) total insulation Mark shall be read vertically for AWG size 22 NOTES: - THIS WIRE MEETS ALL REQUIREMENTS OF BMS13-48T10C1, EXCEPT IDENTIFICATION AS MODIFIED HEREIN. - STRIPING INK MEETS RAYCHEM SPECIFICATION RT1404 WHICH INCLUDES IMMERSED I.R. AND DWV TESTING. COLORS, STRIPES AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. 300 Constitution Drive, Menlo Park, California 94025 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. 1-800-2 Raychem Fax: 1-650-361-6297 Page 1 of 1 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Hook-up Wire category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 002333-000 M81044/12-22-6 M81044/9-8-9 743094-001 81044/12-18-9CS3209 8538-009-1000 ATFC0311-20-5D EF5675-000 BFWUL3239-24-PINK 22759/34-16-9CS2621 22759/42-24-9CS2620 933205-000 284711-000 961473-000 30802-009-250 99M0111-20-2 A00594-000 190571-000 22759/41-12-9CS2620 22759/41-16-9CS2620 22759/43-10-9CS2873 265925-000 CM9524-000 31510-010-250 31514-009-500 32412-009-500 34401-010-250 34402-010-500 M81044/9-4-9 391441-BK007 400R0111-10-9 431660-000 ATFC0311-20-0 ATFC0311-20-3 44/7024-26-9-9 44A0112-22-9CS3184 456157-000 BFW-UL3239-24-WHITE 55/0312-26-6L-CS2570 55A0811-12-9 55A6087-20-9-9-9 55A6315-22-9-9CS2632 55A7400-22-9/96-9CS2275 55A9002-30-5 55PC0211-20-5CS2502 55PC0811-6-9CS2637 55PC1211-22-9-9CS3278 C07683-000 32820-009-5000 34020-008-2000