7-1393222-9 TE Connectivity

General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kV/8 mm coil-contact Reinforced insulation (protection class II) Ambient temperature up to 85C at 8 A Plastic materials according to IEC60335-1 (domestic appliances) RoHS compliant (Directive 2002 / 95 / EC) as per product date code 0404 Applications HVAC, interface technology, power supplies, TV-/Monitor control, F0143-C computer-/communication technology, domestic appliances, Hi-Fi products, timers Approvals V REG.-Nr. 3919, Z E214024 Technical data of approved types on request Contact data Contact configuration 1CO or 1NO Contact set single contact Type of interruption micro disconnection Rated current versions A,B: 8 A versions C,D: 10 A Rated voltage / max.switching voltage AC 240/400 VAC Maximum breaking capacity AC 2000 VA Limiting making capacity, max 20 ms A302: 65 A max 4 s, duty factor 10% 15 A 15 A Contact material AgSnO2, AgCdO AgNi0,15* 6 Mechanical endurance 10x10 cycles -1 Rated frequency of operation with / without load 6 / 1200 min *not recommended for AC loads with arcing (CC2 according EN61810-2) Contact ratings Type Load Cycles V23061-A1***-A302 8 A, 250 VAC, resistive load, 85C, 1 mm mounting -1 3 distance, 6 cycles min , 50% duty factor, EN61810-1 100x10 V23061-C2***-A302 10 A, 250 VAC, resistive load, 85C, 0 mm mounting -1 3 distance, 6 cycles min , 50% duty factor, EN61810-1 10x10 V23061-C2***-A302 5 A, 250 VAC, resistive load, 105C, 0 mm mounting -1 3 distance, 6 cycles min , 50% duty factor, EN61810-1 100x10 3 V23061-A1***-A302 TV-4 Tungsten, 120 VAC, UL508 25x10 3 V23061-*****-A30*, 240 VAC, A300, Pilot duty, UL508 6x10 Coil data Rated coil voltage range DC coil 3...60 VDC Coil power DC coil typ. 220 mW Operative range 2 Coil insulation system according UL1446 Class A, Class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 001 3 2.1 0.3 40+10% 225 002 5 3.4 0.5 118+10% 212 003 6 4.1 0.6 165+10% 218 004 9 6.1 0.9 364+10% 223 005 12 8.2 1.2 652+10% 221 007 24 16.3 2.4 2270+10% 254 009 48 32.6 4.8 8790+10% 262 010 60 40.8 6.0 15265+15% 236 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request 1 Datasheet Rev. GH1 Dimensions are in mm unless Product specification processing information Schrack section. Issued 2007/08 otherwise specified and are according to IEC 61810-1. only to be used together www.tycoelectronics.com shown for reference purposes Product data, technical para- with the Definitions at Specifications subject to www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.General Purpose Relays SCHRACK Miniature Power PCB Relay MSR (Continued) Insulation CO contact NO contact PCB layout / terminal assignment Bottom view on solder pins Dielectric strength coil-contact circuit 4000 Vrms open contact circuit 1000 Vrms Clearance / creepage coil-contact circuit W 8 / 8 mms W8/8mm 1 CO contact, 3.2 mm Material group of insulation parts IIIb IIIb Insulation to IEC 60664-1 Type of insulation coil-contact circuit reinforced reinforced open contact circuit functional functional Rated insulation voltage 250 V 250 V Pollution degree 3 2 3 Rated voltage system 230 V 400 V 230 / 400 V Overvoltage category III III S0255-AA Other data RoHS - Directive 2002/95/EC compliant as per product date code 0404 Flammability class according to UL94 V-0 For WG version: GWFI to IEC 60335-1 > 850 C GWIT to IEC 60335-1 > 775 C Ambient temperature range -40...+85C Operate- / release time 6 / 2,5 ms Bounce time NO / NC contact 0,5 / 4 ms Vibration resistance (function) NO / NC contact 10 / 4 g S0255-AB Shock resistance (function) NO / NC contact 20 / 5 g Shock resistance (destruction) 100 g 1 NO contact, 5 mm Category of protection RTII-flux proof RTIII- wash tight Mounting pcb Mounting position any Minimum mounting distance 0 mm Resistance to soldering heat flux-proof version 270C / 10 s wash-tight version 260C / 5s Relay weight 11 g Packaging unit 20 / 1000 pcs S0255-AH S0255-AI Dimensions 1 CO contact, 3.2 mm 1 NO contact, 5 mm S0275-AA S0275-AH 2 Datasheet Rev. GH1 Dimensions are in mm unless Product specification processing information Schrack section. Issued 2007/08 otherwise specified and are according to IEC 61810-1. only to be used together www.tycoelectronics.com shown for reference purposes Product data, technical para- with the Definitions at Specifications subject to www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.