7-1393273-6 TE Connectivity

Automotive Relays PCB Relays Mini Relay K (Open Sealed) Q Limiting continuous current 20A Q 24VDC versions available Typical applications Car alarm, hazard warning signal, heated rear screen, immobilizer, lamps front/rear, fog light, interior lights, sun roof, turn signal, wiper control. F072A/C fcw2b Contact Data Load resistive/inductive resistive/inductive resistive/inductive head/indicator head/indicator load load load lamp lamp Contact arrangement 1 form A, 1 NO 1 form C, 1 CO 1 form U/X, 2 NO 1 form A, 1 NO 1 form U/X, 2 NO Rated voltage 12VDC 12VDC 12VDC 12VDC 12VDC Rated current 15A 10/15A 2x10A 10A 2x6A Limiting continuous current 23C 15A 10/15A 2x10A 12A 2x6A 85C 10A 5/10A 2x6A 10A 2x5A 1)2) 3) 3) Limiting making current 60A NC/NO 12/60A 2x40A 60A 120A Limiting breaking current 20A 10/20A 2x20A 6A 12A Contact material AgNi0.15 AgNi0.15 AgNi0.15 AgSnO.2 AgSnO.2 4) Min. recommended contact load 1A at 5VDC 1A at 5VDC 1A at 5VDC 1A at 5VDC 1A at 5VDC Initial voltage drop at 10A, typ./max. 50/300mV 50/300mV 2x50/300mV 150/300mV 150/300mV 5) Operate/release time max. typ. 3/1.5ms 5 5 5 6 6 Electrical endurance >2x10 ops. >2x10 ops. >2x10 ops. >1x10 ops. >1.5 x 10 ops. at 13.5VDC, 10A at 13.5VDC, 10A at 13.5VDC, 10A up to 6x21W up to 6x21W 5 5 >1.5x10 ops. >7.5x10 ops. 100A (on), 10 A (off) 100A (on), 10A (off) high beam high beam 1) The values apply to a resistive load or inductive load with suitable spark suppression and at maximum 13.5VDC for 12VDC and 27VDC for 24VDC load voltages. 2) For a load current duration of maximum 3s for a make/break ratio of 1:10. 3) Corresponds to the peak inrush current on initial actuation (cold lament). 4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at Automotive Relays PCB Relays Mini Relay K (Open Sealed) (Continued) Coil Data Other Data Rated coil voltage 12VDC, 24VDC EU RoHS/ELV compliance compliant Degree of protection Coil versions, DC coil IEC 61810 RT 0 open, Coil Rated Operate Release Coil Rated coil RT III immersion cleanable code voltage voltage voltage resistance power Climatic cycling with condensation VDC VDC VDC 10% W EN ISO 6988 20 cycles, storage 8/16h 061 12 6.9 1.2 130 1.1 Temperature cycling (shock) 062 24 14.1 2.4 520 1.1 IEC 60068-2-14, Na 720 cycles, -40/+85C (dwell time 1h) All gures are given for coil without pre-energization, at ambient temperature +23C. Damp heat constant IEC 60068-2-3 , Ca 56 days, upper air temperatue 55C Coil operating range Corrosive gas IEC 60068-2-42 10 days IEC 60068-2-43 10 days Vibration resistance (functional) 6) IEC 60068-2-6 (sine sweep), 10 to 200Hz, 23 to 35g Shock resistance (functional) 6) IEC 60068-2-27 (half sine), 4 to 6ms 23 to 280g Terminal type PCB Weight, open/sealed approx. 8/9g (0.28/0.32oz) Solderability (aging 3: 4h/155C) IEC 60068-2-20 Ta, method 1, hot dip 5s, 215C Sealing, IEC 60068-2-17 Qc, method 2, 1min/70C Packaging unit open 600 pcs. sealed 504 pcs. 6) Values weekest direction. Depending on mounting position: no change in the switching state >10s. Does not take into account the temperature rise due to the contact current E = pre-energization Terminal assignment, open and sealed version Bottom view on solder pins 1 form A, NO 1 form U/X, 2 NO 1 form C, CO TE1111-U1 TE1116-11 TE1077-B1 2 09-2010, Rev. 0910 Datasheets and product specication ac- Datasheets and product data is subject to the Datasheets, product data, Denitions sec- cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specications www.tycoelectronics.com together with the Denitions section. the Denitions section, available at are subject to change. 2010 Tyco Electronics Ltd.