1 4 /2 7 4 /8 4.0 3.0 Protective Relays 700 Series w/ Adjustable Time Delay Product Specifications Product Facts TERMINAL STRIPS Line Voltage n Function 32 6 - 32 SCREWS Model 710TD 120 V, 220 V or 266 V, n ANSI/IEEE C37.90-1978 line to neutral Model 730TD 120 V, 230 V, 380 V, n UL File No. E58048 460 V, L-L, 3 Phase or 120 V, Single R Phase, L-N n CSA File No. LR61158 R All models for three phase, three wire sensing are available, see Ordering Information Line Frequency 50-500 Hz. Current Requirements Several types of Reverse 0 to 5 amp max direct or from CT with 5 amp secondary Power Relays are available including relays sensitive Trip Adjustment Screwdriver adjustable 4% to 20% (of to reverse reactive power the 5 amp rating) (kVAR). KILOVAC is the Time Delay Adjustment 0.5 to 20 leading brand of reverse seconds, screwdriver adjustable power relays. Our rugged Output Contacts One set N.O., one sealed construction set N.C. provides continuous Contact Ratings 5 amp resistive at and reliable operation 11 /64 DIA. 120 AC or 28 Vdc unaffected by shock, 4 MTG. HOLES Power Consumption vibration or other severe Note: Dimensions in inches. Multiply values by 25.4 for dimensions in mm. Voltage circuit 2 VA max. environments. Reverse Current circuit 4 VA max. Power Relays are used for Model 710TD Model 720TD (X) thru 724TD (X) Weight 2.75 lbs. max. the protection of generator sets operating in parallel. Notes: 1. Remove screw for access to the pick-up and time delay adjust- ments. 2. Clockwise rotation of the pick-up adjustment will raise the reverse trip point. 3. Clockwise rotation of the time adjustment will increase the time delay. 4. Polarity of the voltage and the cur- rent connections must be Designed for 120, 220 or 266 volt For operation on three phase, observed for true power sensing. line to neutral connection three wire 5. Interchanging connections on terminals 5 and 6, will cause the output contacts to pick-up on forward power and dropout on no power or reverse power. Ordering Information Sample Part Number 720TDX Type: 710TD = 120V, 220V, 266V line to neutral 720TD = 120V, L-L, 3 Phase 721TD = 230V, L-L, 3 Phase 722TD = 380V, L-L, 3 Phase 723TD = 460V, L-L, 3 Phase 724TD = 575V, L-L, 3 Phase 725TD = 416V, L-L, 3 Phase 730TD = 120 V, 230 V, 380 V, 460 V, L-L, 3 Phase or 120 V, Single Phase, L-N Mounting: X = Flange Blank - Stud Options: 7 = Reverse Inductive, 60 Hz Consult factory for additional models. 1120 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. 7 3 /8 5 4 /8