General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 bistable n 1 pole 16A, 1 form C (CO) or 1 form A (NO) contact n Polarized bistable version with 1 or 2 coils n 5kV/10mm coil-contact n Reinforced insulation Typical applications Battery powered equipment or applications with memory function F0176-C Zb Approvals Coil Data, bistable coils 1 coil 2 coils VDE Cert. No. 40007571, UL E214025, cCSAus 1142018 Magnetic system polarized, bistable Technical data of approved types on request Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Contact Data Limiting voltage, % of rated coil voltage 120% 150% Contact arrangement 1 form C (CO) or 1 form A (NO) Min./Max. energization duration 30ms/1min at <10% duty factor Rated voltage 250VAC Coil insulation system according UL1446 class F Max. switching voltage 400VAC Rated current 16A Coil versions, bistable coil Limiting continuous current 16A, UL: 20A Coil Rated Set Reset Coil Rated coil Limiting making current, max. 4s, duty factor 10% 30A code voltage voltage voltage resistance power Breaking capacity max. 4000VA VDC VDC VDC 10% mW Contact material AgNi 90/10 bistable 1 coil -1 Frequency of operation, with/without load 360/72000h A03 3 2.1 1.7 21 429 Operate/Reset time max. 10/10ms A05 5 3.5 2.8 62 403 Bounce time max., form A/form B 3/6ms A06 6 4.2 3.3 90 400 A12 12 8.4 6.6 360 400 Contact ratings A24 24 16.8 13.2 1440 400 Type Contact Load Cycles bistable 2 coils IEC 61810 F03 3 2.1 1.7 15 600 3 RT314 A (NO) 16A, 250VAC resistive, 85C 30x10 F05 5 3.5 2.8 42 595 3 RT314 C (CO) 16A, 250VAC resistive, 85C 10x10 F06 6 4.2 3.3 55 655 UL 508 F12 12 8.4 6.6 240 600 3 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85C 6x10 F24 24 16.8 13.2 886 650 3 All figures are given for coil without pre-energization, at ambient temperature +23C. RT334 A (NO) 16A, 250VAC, general purpose, 85C 50x10 3 Other coil voltages on request. RT314 A (NO) 1hp, 240VAC, 40C 1x10 Bistable coils - operation 6 Mechanical endurance >5x10 operations Version 1 coil 2 coils Coil terminals A1 A2 A1 A3 A2 Operate + - + - Reset - + - + Contact position not defined at delivery 1 10-2014, Rev. 1014 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 bistable (Continued) Insulation Data Other Data (continued) 1) Initial dielectric strength Terminal type PCB-THT, plug-in between open contacts 1000V Weight 14g rms between contact and coil 5000V Resistance to soldering heat THT, IEC 60068-2-20 rms Clearance/creepage RTII - flux proof 270C/10s between contact and coil 10/10mm RTIII - wash tight 260C/5s Material group of insulation parts IIIa Packaging/unit tube/20 pcs., box/500 pcs. 1) socket available for 1 coil version only, see Accessories. Tracking index of relay base PTI 250V Accessories Other Data For 1 coil version, Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content details see datasheet Accessories Industrial Power Relay R T refer to the Product Compliance Support Center at NOTE: indicated contact ratings and electrical endurance data for direct www.te.com/customersupport/rohssupportcenter wiring of relays (according IEC 61810-1) for relays mounted on sockets Ambient temperature -40 to 85C deratings may apply. Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration/shock resistance (functional), opening B contact 3/5g opening closed A contact 6/15g Shock resistance (destructive) 100g Dimensions PCB layout / terminal assignment Bottom view on solder pins 16A, pinning 5 mm, 1 form A (NO) contact S0272-BC a) Indicated contact position during or after coil energization with reset voltage. S0163-DI a) S0418-CM b) for 2 coil version only *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 12A, pinning 3,5mm, 1 form A (NO) contact 16A, pinning 5 mm, 1 form C (CO) contact a) S0163-DI S0418-CM *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 2 10-2014, Rev. 1014 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company