843473-1 TE Connectivity

04536%5+10 *5 & 7 105 %5+3 1%-+0) 0% 0% %44 +2 %25 %. 100%513 6) 1%-+0) &) %25 %. 100%513 Figure 1 The lance recess is the cavity located between the contact and the connector housing. A solid rib This instruction sheet covers the use of Extraction (locking ledge) at the rear of the lance recess cavity Tool 8434731 which is recommended for removing provides a stop for the extraction tool. The housings crimp, snapin contacts from AMPMODU MOD I and are designed to prevent improper insertion of the MOD IV Receptacle Connectors listed in Catalog contacts which are inserted into the rear of the 1307819. Read these instructions before attempting housing. to extract the contacts. A lug is located on the side of the MOD I housing which contains the contact locking ledge. Reasons for reissue are given in SECTION 5, REVISION SUMMARY. +)63 Determine which connector contains the contact to be removed and proceed as follows: The extraction tip is designed to enter the lance recess in the front of the housing and depress the 1. Insert the tool straight into the lance recess until locking lance of the contact. it bottoms on the locking ledge. 2. Holding the tool and connector in one hand, grip the wire of the contact with the other hand and pull the contact out of the back of the connector. *+4%10531..&&1%6/05+446 ,%551%* 0) 9%1 .%5310+%4 13213 5+10 33+4 63) 1( .. 0530 5+10 . +)*54 437& 13. 54537+4+10 0& )+10 . 6451/3 37+% .1)1 0&9%1 .%5310+%4 353 &/ 3-4 7+4+51638 4+5 5%%% 3 &/ 3- 5*3231&6%54 .1)14 0&%1/2 090 /464& 35*23123591(5*+3342%5+718034 % Figure 2 Extraction Tool 8434731 should conform to the Since the previous release of this sheet, the following dimensions listed in Figure 2. Each tool should be revisions were made: inspected upon arrival to be sure it has not been Updated logo and format. damaged in transit, and at regularly scheduled intervals to be sure it remains functional. If the tool requires repair, send it with a written description of the problem, to: CUSTOMER REPAIR (3835) TYCO ELECTRONICS CORPORATION P.O. BOX 3608 HARRISBURG, PA 171053608