SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. TOP SEAL: Low outgassing thermoplastic, color-blue. 3. MULTI-CONDUCTOR SEAL: Low outgassing thermoplastic, color-natural. 4. CRIMP SPLICE: Base Metal: Copper Alloy 102 per ASTM B-75. Plating: Tin per MIL-T-10727, Type 1. Dimensions: Part Name Prod. A B Color Code CMA Rev. Range D-436-0125 C 2.67 (0.105) 1.75 (0.069) Blue 779 - 2680 2.56 (0.101) 1.65 (0.065) D-436-0126 C 3.89 (0.153) 2.59 (0.102) Yellow 1900 - 6755 3.73 (0.147) 2.46 (0.097) APPLICATION 1. These parts are designed to make an immersion resistant stub splice in wires having insulations rated for at least 135C. 2. Wire Accomodation: Jacket O.D.: 1.32 (0.052) max D-436-0125 D-436-0126 Gauge (AWG) CMA Number Gauge (AWG) CMA Number 20 1216 * 20 1216 * 22 754 2 - 3 22 754 3 - 7 24 475 2 - 5 24 475 4 - 7 26 304 3 - 7 26 304 ** * Use D-436-0127, ** Use D-436-0125 3. Parts will meet performance requirements of MIL-S-81824/1. TITLE: ( 7at 1.35 (0.053) THERMOFIT STUB SPLICE SEALING SYSTEM, DEVICES 300 Constitution Drive 20/16 SPLICE (D-436-0125), 16/12 SPLICE (D-436-0126), Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: D-436-0125/-0126 INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend DCR NUMBER: REPLACES: 0.00 N/A this drawing at any time. Users should D001278 N/A 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 14-Nov.-00 SEE TABLE 1 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.