9-1415047-1 TE Connectivity

General Purpose Low Power PCB Relays SCHRACK Power PCB Relay RTH 105C 16A n 1 pole 16A, 1 form C (CO) or 1 form A (NO) contact n Ambient temperature 105C n Sensitive coil 400mW n 5kV/10mm coil-contact n Reinforced insulation n WG version: Product in accordance to IEC 60335-1 Typical applications Oven control, cooking plate control. Zb Approvals VDE Cert. No. 40007571, UL E214025, cCSAus 1142018 Coil Data Technical data of approved types on request. Coil voltage range 5 to 60VDC Operative range, IEC 61810 90...110% U RTD Coil insulation system according UL1446 class F Contact Data Coil versions, DC coil Contact arrangement 1 form C (CO) or 1 form A (NO) Coil Rated Operate Release Coil Rated coil Rated voltage 250VAC code voltage voltage voltage resistance power Max. switching voltage 400VAC VDC VDC VDC 10% mW 1) 1) Rated current 16A 009 9 6.3 0.9 203 399 1) Limiting continuous current, form A/form B 16 / 26A 012 12 8.4 1.2 360 400 1) Limiting making current (form A contact) 024 24 16.8 2.4 1440 400 max. 4 s, duty factor 10 % 30A 1) Continuous thermal load > 10 A at 105C requires reduction of coil power to 64% of rated power after 100ms. Breaking capacity max. 4000VA All figures are given for coil without pre-energization, at ambient temperature +23C. Contact material AgNi 90/10 -1 Other coil voltages on request. Frequency of operation, with/without load 360/72000h Operate/release time max. 8/6ms Bounce time max., form A/form B 4/6ms Contact ratings Type Contact Load Cycles IEC 61810 3 RTH14 A (NO) 10A, 250VAC resistive,105C 150x10 3 RTH14 C (CO) 16A, 250VAC resistive, 105C 10x10 RTH14 B (NC) 26A, 250VAC resistive, 85C 500 3 RTH34 A (NO) 10A, 400VAC resistive, 105C 150x10 3 RTHH4 A (NO) 10A, 250VAC resistive, 105C 250x10 UL 508 3 RTH14 A/B (NO/NC) 16A, 250VAC, resistive, 105C 30x10 3 RTH34 A (NO) 20A, 250VAC, general purpose, 85C 6x10 6 Mechanical endurance >30x10 operations 1) Continuous thermal load >10A at 105C requires reduction of coil power to 64% of rated power after 100ms. Insulation Data Initial dielectric strength between open contacts 1000V rms between contact and coil 5000V rms Clearance/creepage between contact and coil 10/10mm Material group of insulation parts IIIa Tracking index of relay base PTI250V 1 01-2021, Rev. 0121 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Low Power PCB Relays SCHRACK Power PCB Relay RTH 105C 16A (Continued) Other Data PCB layout / terminal assignment Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at 16 A, pinning 5mm www.te.com/customersupport/rohssupportcenter Resistance to heat and fire WG version according EN 60335-1, par.30 Ambient temperature -40 to 105C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional) form A/form B contact, 30 to 150Hz 20/5g Shock resistance (destructive) 100g Terminal type PCB-THT Weight 14g Resistance to soldering heat THT *) With the recommended PCB hole sizes a grid IEC 60068-2-20 270C/10s pattern from 2.5 mm to 2.54 mm can be used. Packaging/unit tube/20 pcs., box/500 pcs. 1 form C (CO) contact Dimensions 1 form A (NO) contact Product code structure Typical product code RT H 3 4 012 WG Type RT Power PCB Relay RTH 105C 16A Version H 16A, pinning 5mm, 105C Contact configuration 1 1 form C (CO) contact 3 1 form A (NO) contact H 1 form A (NO) contact High Performance Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) Product code Version Contact configuration Contact Material Coil Part number RTH14012 16A, 105C 1 form C (CO) AgNi 90/10 12VDC 8-1415006-1 RTH14012WG contact 1-1415538-1 RTH14024WG 24VDC 9-1415535-4 RTH34012 1 form A (NO) 12VDC 9-1415006-1 RTH34012WG contact 1-1415536-9 RTH34024 24VDC 1415039-1 RTH34024WG 2-1415536-0 RTHH4009WG 16A, 105C, 9VDC 1-1415540-6 RTHH4012 High Performance 12VDC 8-1415047-1 RTHH4012WG 4-1415536-2 RTHH4024 24VDC 9-1415047-1 This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. 2 01-2021, Rev. 0121 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.