General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay on DIN-rail SR2 Z n 2 pole relay with force guided contacts according to EN50205 n DIN rail mounting Typical applications contact monitoring in railway, elevator and machine controls F-SR2Z-A Approvals Insulation Data Relay SR2M: VDE, UL, TUV, CQC Initial dielectric strength Module SR2Z: CE between open contacts 1500V rms Technical data of approved types on request between contact and coil 4000V rms between adjacent contacts 2000V rms Contact Data Clearance/creepage Contact arrangement 2 form C (CO) contacts between open contacts microdisconnection According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and between contact and coil 8/8mm 21-24) shall be used as force guided contacts. between adjacent contacts 1/1mm Rated voltage 250VAC Insulation to EN 50178, type of insulation Max. switching voltage 250VAC between contact and coil reinforced Rated current 6A between adjacent contacts basic Contact material AgNi Contact style single contact, force guided 1 form A + B, 1 NO + 1NC type A according to EN 50205 Other Data 2 form C, 2CO type B according to EN 50205 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Min. recommended contact load 5V/10mA refer to the Product Compliance Support Center at Initial contact resistance 100m at 1A, 24VDC www.te.com/customersupport/rohssupportcenter 20 at 10mA, 5VDC Ambient temperature range -1 Frequency of operation, with/without load 6/300min for mounting/handling 0 to 40C Contact ratings, IEC60947-5-1, in operation -25 to 50C on 1 form A (NO) contact AC15-3A Terminal type screwless clamp connectors DC13-6A Wire cross section 6 2 Mechanical endurance 10x10 operations solid wire 2.5mm 2 stranded wire 2.5mm 2 stranded wire with bootlace crimp 1.5mm Coil Data Mounting position any Coil voltage range 24VDC Weight 50g Operative range, % of rated coil voltage 90 to 110% of U Packaging unit 2 rtd Release voltage (+23C) 10% of U rtd Limiting voltage, % of rated coil voltage 110% Max. coil power 700mW Input circuit LED 1 10-2012, Rev. 1012 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay on DIN-rail SR2 Z (Continued) Terminal assignment S0532-A Dimensions Module width 20 mm Module length 87 mm Fit onto mounting rails according to DIN EN 60175 S0533-A Product code structure Typical product code SR2Z Y 024 Type SR2Z Relay with force guided contacts on DIN-rail SR2 Z Contact configuration Y 2 form C (CO) contacts Coil DC Coil code = rated coil voltage (e.g. 024=24 VDC) Other types on request Product code Type Contact configuration Coil Part number SR2ZY024 2-pole module 2 form C (CO) contacts 24VDC 9-1415536-1 2 10-2012, Rev. 1012 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company