SPECIFICATION CONTROL DRAWING 9530H1014 Date 3-22-13 95 OHM, AWG 30, 7 STARNDS OF AWG 38, COAXIAL CABLE CHEMINAX Revision H THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. CHARACTERISTIC IMPEDANCE 95 5 ohms, Method B CAPACITANCE 13.5 pF/ft. (nominal) CONDUCTOR 14.6 pF/ft. (maximum) AWG 30, 7 Strands of VELOCITY OF PROPAGATION 80% (nominal) AWG 38,Silver-Coated .0120 High-Strength Copper (nominal) Alloy .0130 ADDITIONAL REQUIREMENTS (maximum) ELECTRICAL .072 DIELECTRIC (nominal) Rayfoam H .074 Color - White CONDUCTOR RESISTANCE 118. ohms/1000 ft. (maximum) (maximum) INSULATION RESISTANCE 10,000 megohms (minimum) SHIELD for 1000 ft089 AWG 38, JACKET FLAWS (nominal) Silver-Coated Copper SPARK TEST 1.0 kV (rms) .091 IMPULSE TEST 6.0 kV (peak) (maximum) VOLTAGE WITHSTAND (DIELECTRIC) 1000 volts (rms) (minimum) ENVIRONMENTAL FLAMMABILITY Method B HEAT SHOCK 225C JACKET LOW TEMPERATURE-COLD BEND -55C/2.75 inch mandrel .103 Modified FEP VOLTAGE WITHSTAND 1000 volts (rms), 1 minute (nominal) (Post Environmental) .108 (maximum) PHYSICAL INSULATION (DIELECTRIC) ELONGATION 50% (minimum) 2 TENSILE STRENGTH 600 lbf/in (minimum) JACKET ELONGATION 150% (minimum) 2 TENSILE STRENGTH 1000 lbf/in (minimum) JACKET THICKNESS .006 inch (minimum) .009 inch (maximum) SHIELD COVERAGE 90% (minimum) Outer jacket color will be translucent white (designated by a -9 appended to the part number, e.g. 9530H1014-9X) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 9.0 lbs/1000 ft. (maximum) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS 501 Oakside Avenue REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE Redwood City, California 94063-3800 ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1-800-227-8816 Fax: 1-650-361-6297 2013 Tyco Electronics Corporation, All rights reserved.