A11755-000 TE Connectivity

Continuous format heat-shrinkable TTMS identification tubing Computer printable Flat heat-shrinkable Military specification material and identification tubing print performance -55C to 135C operating temperature 3:1 shrink ratio CSA certified, UL recognised (VW-1 rated) TTMS tubing is flattened, heat-shrinkable changes necessary during production 81531 and MIL-STD-202 both before and tubing intended for wire and cable runs. after shrinking. Raychem-recommended identification. Available in continuous ribbons should always be used. The TTMS identification tubing is made from spools, TTMS tubing is designed for tubing has a 3:1 shrink ratio (except sizes durable, flame retarded, radiation- computer-based printing using 38.1 and 50.8, which are 2:1) and cover a crosslinked heat-shrinkable polyolefin. Raychems TMS 2000Plus printer. This wide range of wire diameters, thus The printed tubing meets the mark product format makes TTMS simplifying inventory. The tubing shrinks permanence requirements of MIL-DTL- identification tubing ideal for applications extremely rapidly, so installation is fast 23053/5 classes 1 and 3. The where in-sequence kitting is not of over- and economical. The installed markers identification marks are permanent riding importance, for example where are low profile and lightweight. They may immediately after printing and remain several hundred identical markers are be used to provide strain relief and legible even when exposed to solvents, required. Large pack sizes, usually 100m insulation in addition to identification. fuels and oils. The tubing meets the mark (328 feet), minimise the number of spool permanence requirements of MIL-M- Temperature rating Operating temperature range -55C to 135C Minimum recovery temperature 85C Maximum storage temperature 40C Specifications and approvals Raychem RW 2025 UL recognised Standard 224, file E35586 CSA certified CSA C22.2 No. 198.1-98, file 31929 Military MIL-DTL-23053/5, MIL-M-81531, MIL-STD-202FTTMS Dimensions inches (millimeters) Inside diameter Expanded Recovered Recommended use range Recovered wall Weight (minimum) (maximum) thickness lb/ft (g/m) TTMS-2.4 0.093 (2.36) 0.031 (0.79) 0.032 - 0.075 (0.81 - 1.90) 0.021 0.003 0.0017 (2.76) (0.53 0.08) TTMS-3.2 0.125 (3.18) 0.042 (1.07) 0.044 - 0.105 (1.11 - 2.66) 0.023 0.003 0.0025 (3.73) (0.58 0.08) TTMS-4.8 0.187 (4.75) 0.062 (1.57) 0.069 - 0.160 (1.75 - 4.06) 0.023 0.003 0.0033 (4.93) (0.58 0.08) TTMS-6.4 0.250 (6.35) 0.083 (2.11) 0.091 - 0.215 (2.31 - 5.46) 0.023 0.003 0.0043 (6.46) (0.58 0.08) TTMS-9.5 0.375 (9.53) 0.125 (3.18) 0.137 - 0.320 (3.47 - 8.12) 0.023 0.003 0.0062 (9.27) (0.61 0.08) TTMS-12.7 0.500 (12.70) 0.166 (4.22) 0.183 - 0.425 (4.64 - 10.79) 0.024 0.003 0.0084 (12.53) (0.61 0.08) TTMS-19.0 0.750 (19.05) 0.250 (6.35) 0.275 - 0.640 (6.99 - 16.25) 0.024 0.003 0.0149 (22.13) (0.61 0.08) TTMS-25.4 1.000 (25.40) 0.333 (8.46) 0.366 - 0.850 (9.29 - 21.59) 0.025 0.003 0.0190 (28.24) (0.64 0.08) TTMS-38.1 1.500 (38.10) 0.750 (19.05) 0.825 - 1.300 (20.95 - 33.02) 0.020 0.003 0.0340 (50.61) (0.51 0.08) TTMS-50.8 2.000 (50.80) 1.000 (25.40) 1.100 - 1.750 (27.94 - 44.95) 0.025 0.003 0.0584 (86.96) (0.64 0.08) Part numbering system TTMS-3.2-9 Color Inside diameter, as supplied (millimeters) Product name Ordering information Colors Standard Yellow White Black Code 4 9 0 Non-standard Red Orange Green Blue Violet Gray Code 2 356 78 Packaging Standard 328ft (100m) spools for all sizes except 38.1 and 50.8, which are 164ft (50m) Tubing size Total length Order description Color Ribbons 2.4mm (3/32) to 12.7mm (1/2) 300m (984ft) 2000P-RIBBON-4TT-NAR Black 19.0mm (3/4) & 25.4 mm (1) 300m (984ft) 2000P-RIBBON-4TT-MED Black 1 38.1 mm (1 / ) & 50.8mm (2) 300m (984ft) TMS-RJS-RIBBON-4RPSCE Black 2 2.4mm (3/32) to 12.7mm (1/2) 300m (984ft) 2000P-RIBBON-4AG-NAR Silver 19.0mm (3/4) & 25.4 mm (1) 300m (984ft) 2000P-RIBBON-4AG-MED Silver 1 38.1mm (1 / ) & 50.8 mm (2) 300m (984ft) TMS-RJS-RIBBON-4AG Silver 2 * Raychem-recommended ribbons should always be used.